This reverts commit 3ce2cd63e8ee037644db0cbea65e6c40ab6cc178 which is
commit aa838896d87af561a33ecefea1caa4c15a68bc47 upstream.

Ben writes:
	When I looked into the referenced security issue, it seemed to only be
	exploitable through wakelock names, and in the upstream kernel only
	after commit c8377adfa781 "PM / wakeup: Show wakeup sources stats in
	sysfs" (first included in 5.4).  So I would be interested to know if
	and why a fix was needed for 4.19.

	More importantly, this backported version uniformly converts to
	sysfs_emit(), but there are 3 places sysfs_emit_at() must be used
	instead:

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/r/95831df76c41a53bc3e1ac8ece64915dd63763a1.camel@decadent.org.uk
Cc: Joe Perches <joe@perches.com>
Cc: Brennan Lamoreaux <blamoreaux@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aa838896d87af561a33ecefea1caa4c15a68bc47 upstream.

Convert the various sprintf fmaily calls in sysfs device show functions
to sysfs_emit and sysfs_emit_at for PAGE_SIZE buffer safety.

Done with:

$ spatch -sp-file sysfs_emit_dev.cocci --in-place --max-width=80 .

And cocci script:

$ cat sysfs_emit_dev.cocci
@@
identifier d_show;
identifier dev, attr, buf;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
	return
-	sprintf(buf,
+	sysfs_emit(buf,
	...);
	...>
}

@@
identifier d_show;
identifier dev, attr, buf;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
	return
-	snprintf(buf, PAGE_SIZE,
+	sysfs_emit(buf,
	...);
	...>
}

@@
identifier d_show;
identifier dev, attr, buf;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
	return
-	scnprintf(buf, PAGE_SIZE,
+	sysfs_emit(buf,
	...);
	...>
}

@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
	return
-	strcpy(buf, chr);
+	sysfs_emit(buf, chr);
	...>
}

@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
	len =
-	sprintf(buf,
+	sysfs_emit(buf,
	...);
	...>
	return len;
}

@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
	len =
-	snprintf(buf, PAGE_SIZE,
+	sysfs_emit(buf,
	...);
	...>
	return len;
}

@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
	len =
-	scnprintf(buf, PAGE_SIZE,
+	sysfs_emit(buf,
	...);
	...>
	return len;
}

@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
-	len += scnprintf(buf + len, PAGE_SIZE - len,
+	len += sysfs_emit_at(buf, len,
	...);
	...>
	return len;
}

@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@

ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	...
-	strcpy(buf, chr);
-	return strlen(buf);
+	return sysfs_emit(buf, chr);
}

Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/3d033c33056d88bbe34d4ddb62afd05ee166ab9a.1600285923.git.joe@perches.com
[ Brennan : Regenerated for 4.19 to fix CVE-2022-20166 ]
Signed-off-by: Brennan Lamoreaux <blamoreaux@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83b44fe343b5abfcb1b2261289bd0cfcfcfd60a8 upstream.

The cacheinfo structures are alloced/freed by cpu online/offline
callbacks. Originally these were only used by sysfs to expose the
cache topology to user space. Without any in-kernel dependencies
CPUHP_AP_ONLINE_DYN was an appropriate choice.

resctrl has started using these structures to identify CPUs that
share a cache. It updates its 'domain' structures from cpu
online/offline callbacks. These depend on the cacheinfo structures
(resctrl_online_cpu()->domain_add_cpu()->get_cache_id()->
 get_cpu_cacheinfo()).
These also run as CPUHP_AP_ONLINE_DYN.

Now that there is an in-kernel dependency, move the cacheinfo
work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN
work runs.

Fixes: 2264d9c74dda1 ("x86/intel_rdt: Build structures for each resource based on cache topology")
Cc: <stable@vger.kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3a34c986324c07dde32903f7bb262e6138e77c2a upstream.

Commit 448a5a552f336bd7b847b1951 ("drivers: base: cacheinfo: use OF
property_read_u32 instead of get_property,read_number") makes cache
size and number_of_sets be 0 if DT doesn't provide there values. I
think this is unreasonable so make them keep the old values, which is
the same as old kernels.

Fixes: 448a5a552f33 ("drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of_property_read_u32 searches for a property in a device node and read
a 32-bit value from it. Instead of using of_get_property to get the
property and then read 32-bit value using of_read_number, we can
simplify it by using of_property_read_u32.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call ACPI cache parsing routines from base cacheinfo code if ACPI
is enabled. Also stub out cache_setup_acpi and acpi_find_last_cache_level
so that individual architectures can enable ACPI topology parsing.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Rename and change the type of of_node to indicate
it is a generic pointer which is generally only used
for comparison purposes. In a later patch we will put
an ACPI/PPTT token pointer in fw_token so that
the code which builds the shared cpu masks can be reused.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The original intent in cacheinfo was that an architecture
specific populate_cache_leaves() would probe the hardware
and then cache_shared_cpu_map_setup() and
cache_override_properties() would provide firmware help to
extend/expand upon what was probed. Arm64 was really
the only architecture that was working this way, and
with the removal of most of the hardware probing logic it
became clear that it was possible to simplify the logic a bit.

This patch combines the walk of the DT nodes with the
code updating the cache size/line_size and nr_sets.
cache_override_properties() (which was DT specific) is
then removed. The result is that cacheinfo.of_node is
no longer used as a temporary place to hold DT references
for future calls that update cache properties. That change
helps to clarify its one remaining use (matching
cacheinfo nodes that represent shared caches) which
will be used by the ACPI/PPTT code in the following patches.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

In preparation for the next patch, and to aid in
review of that patch, lets move cache_setup_of_node
further down in the module without any changes.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We want the fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>