linux-stable.git/drivers/ata, branch v6.6.7

scsi: sd: Fix system start for ATA devices

2023-12-08T07:52:17+00:00

commit b09d7f8fd50f6e93cbadd8d27fde178f745b42a1 upstream.

It is not always possible to keep a device in the runtime suspended state
when a system level suspend/resume cycle is executed. E.g. for ATA devices
connected to AHCI adapters, system resume resets the ATA ports, which
causes connected devices to spin up. In such case, a runtime suspended disk
will incorrectly be seen with a suspended runtime state because the device
is not resumed by sd_resume_system(). The power state seen by the user is
different than the actual device physical power state.

Fix this issue by introducing the struct scsi_device flag
force_runtime_start_on_system_start. When set, this flag causes
sd_resume_system() to request a runtime resume operation for runtime
suspended devices. This results in the user seeing the device runtime_state
as active after a system resume, thus correctly reflecting the device
physical power state.

Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary")
Cc: 
Signed-off-by: Damien Le Moal 
Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: Change SCSI device boolean fields to single bit flags

2023-12-08T07:52:17+00:00

commit 6371be7aeb986905bb60ec73d002fc02343393b4 upstream.

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") changed the single bit manage_start_stop flag into 2 boolean
fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd:
Introduce manage_shutdown device flag") introduced the manage_shutdown
boolean field for the same structure. Together, these 2 commits increase
the size of struct scsi_device by 8 bytes by using booleans instead of
defining the manage_xxx fields as single bit flags, similarly to other
flags of this structure.

Avoid this unnecessary structure size increase and be consistent with the
definition of other flags by reverting the definitions of the manage_xxx
fields as single bit flags.

Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management")
Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag")
Cc: 
Signed-off-by: Damien Le Moal 
Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org
Reviewed-by: Niklas Cassel 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

ata: pata_isapnp: Add missing error check for devm_ioport_map()

2023-12-03T06:33:03+00:00

[ Upstream commit a6925165ea82b7765269ddd8dcad57c731aa00de ]

Add missing error return check for devm_ioport_map() and return the
error if this function call fails.

Fixes: 0d5ff566779f ("libata: convert to iomap")
Signed-off-by: Chen Ni 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

scsi: sd: Introduce manage_shutdown device flag

2023-10-27T01:00:19+00:00

Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for libata managed disks to enable libata internal
management of disk suspend/resume. However, a side effect of this change
is that on system shutdown, disks are no longer being stopped (set to
standby mode with the heads unloaded). While this is not a critical
issue, this unclean shutdown is not recommended and shows up with
increased smart counters (e.g. the unexpected power loss counter
"Unexpect_Power_Loss_Ct").

Instead of defining a shutdown driver method for all ATA adapter
drivers (not all of them define that operation), this patch resolves
this issue by further refining the sd driver start/stop control of disks
using the new flag manage_shutdown. If this new flag is set to true by
a low level driver, the function sd_shutdown() will issue a
START STOP UNIT command with the start argument set to 0 when a disk
needs to be powered off (suspended) on system power off, that is, when
system_state is equal to SYSTEM_POWER_OFF.

Similarly to the other manage_xxx flags, the new manage_shutdown flag is
exposed through sysfs as a read-write device attribute.

To avoid any confusion between manage_shutdown and
manage_system_start_stop, the comments describing these flags in
include/scsi/scsi.h are also improved.

Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038
Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/
Signed-off-by: Damien Le Moal 
Reviewed-by: Niklas Cassel 
Reviewed-by: Hannes Reinecke 
Reviewed-by: James Bottomley 
Acked-by: Martin K. Petersen

ata: pata_parport: fit3: implement IDE command set registers

2023-10-10T05:42:22+00:00

fit3 protocol driver does not support accessing IDE control registers
(device control/altstatus). The DOS driver does not use these registers
either (as observed from DOSEMU trace). But the HW seems to be capable
of accessing these registers - I simply tried bit 3 and it works!

The control register is required to properly reset ATAPI devices or
they will be detected only once (after a power cycle).

Tested with EXP Computer CD-865 with MC-1285B EPP cable and
TransDisk 3000.

Signed-off-by: Ondrej Zary 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal

ata: pata_parport: add custom version of wait_after_reset

2023-10-10T05:42:22+00:00

Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.

Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.

Signed-off-by: Ondrej Zary 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal

ata: pata_parport: implement set_devctl

2023-10-10T05:42:22+00:00

Add missing ops->sff_set_devctl implementation.

Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Zary 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal

ata: pata_parport: fix pata_parport_devchk

2023-10-10T05:42:22+00:00

There's a 'x' missing in 0x55 in pata_parport_devchk(), causing the
detection to always fail. Fix it.

Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Zary 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal

Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-09-29T20:38:34+00:00

Pull ATA fixes from Damien Le Moal:
 "A larger than usual set of fixes for 6.6-rc4 due to the unexpected
  number of fixes needed to address ATA disks suspend/resume issues.

  In more detail:

   - Add missing additionalProperties on child nodes to the pata-common
     DT bindings (Rob)

   - Fix handling of the REPORT SUPPORTED OPERATION CODES command to
     ignore reserved bits (Niklas)

   - Increase port multiplier soft reset timeout to accomodate slow
     devices and avoid issues on wakeup (Matthias)

   - A couple of minor code fixes to avoid compilation warnings in
     libata-core and libata-eh (me)

   - Many patches from me to address suspend/resume issues, and in
     particular a potential deadlock on resume due to the SCSI disk
     driver resume operation not being synchronized with libata EH port
     resume handling.

     This is addressed by changing the scsi disk driver disk start/stop
     control to allow libata to execute disk suspend (spin down) and
     resume (spin up) on its own during system suspend/resume. Runtime
     suspend/resume control remains with the SCSI disk driver.

     Other fixes include:
      - Fix libata power management request issuing to avoid races
      - Establish a link between ATA ports and SCSI devices to order PM
        operations
      - Fix device removal to avoid issues with driver rmmod removal
      - Fix synchronization of libata device rescan and SCSI disk resume
        operation
      - Remove libsas PM operations as suspend/resume is handled
        directly by the sas controller resume
      - Fix the SCSI disk driver to not issue commands to suspended
        disks, thus avoiding potential system lock-up on resume"

* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  scsi: sd: Do not issue commands to suspended disks on shutdown
  ata: libata-core: Do not register PM operations for SAS ports
  ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  scsi: Do not attempt to rescan suspended devices
  ata: libata-scsi: Disable scsi device manage_system_start_stop
  scsi: sd: Differentiate system and runtime start/stop management
  ata: libata-scsi: link ata port and scsi device
  ata: libata-core: Fix port and device removal
  ata: libata-core: Fix ata_port_request_pm() locking
  ata: libata-sata: increase PMP SRST timeout to 10s
  ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

ata: libata-eh: Fix compilation warning in ata_eh_link_report()

2023-09-28T12:24:18+00:00

The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:

drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                                                           ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                                                        ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2372 |                          ap->eh_tries);
      |                          ~~~~~~~~~~~~~

Avoid this warning by increasing the string size to 16B.

Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Martin K. Petersen