linux-stable.git/drivers/ata, branch v4.9.331

ata: libata-eh: Add missing command name

2022-08-25T09:09:28+00:00

commit d3122bf9aa4c974f5e2c0112f799757b3a2779da upstream.

Add the missing command name for ATA_CMD_NCQ_NON_DATA to
ata_get_cmd_name().

Fixes: 661ce1f0c4a6 ("libata/libsas: Define ATA_CMD_NCQ_NON_DATA")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Greg Kroah-Hartman

ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

2022-06-25T09:45:17+00:00

[ Upstream commit bf476fe22aa1851bab4728e0c49025a6a0bea307 ]

In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Signed-off-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files

2022-06-14T14:52:41+00:00

commit 72aad489f992871e908ff6d9055b26c6366fb864 upstream.

The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.

To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4,
XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1,
XFER_PIO_0

Using the correct ata_bitfield_name_search() macro fixes that:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_PIO_4

While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...

Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Sergey Shtylyov 
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe

2022-06-14T14:52:39+00:00

[ Upstream commit 10d6bdf532902be1d8aa5900b3c03c5671612aa2 ]

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() to avoid refcount leak.

Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Miaoqian Lin 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

ata: pata_marvell: Check the 'bmdma_addr' beforing reading

2022-04-27T11:14:11+00:00

commit aafa9f958342db36c17ac2a7f1b841032c96feb4 upstream.

Before detecting the cable type on the dma bar, the driver should check
whether the 'bmdma_addr' is zero, which means the adapter does not
support DMA, otherwise we will get the following error:

[    5.146634] Bad IO access at port 0x1 (return inb(port))
[    5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[    5.150856] RIP: 0010:ioread8+0x4a/0x60
[    5.160238] Call Trace:
[    5.160470]  
[    5.160674]  marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[    5.161728]  ata_eh_recover+0x3520/0x6cc0
[    5.168075]  ata_do_eh+0x49/0x3c0

Signed-off-by: Zheyu Ma 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

ata: pata_hpt37x: fix PCI clock detection

2022-03-08T18:00:57+00:00

[ Upstream commit 5f6b0f2d037c8864f20ff15311c695f65eb09db5 ]

The f_CNT register (at the PCI config. address 0x78) is 16-bit, not
8-bit! The bug was there from the very start... :-(

Signed-off-by: Sergey Shtylyov 
Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

ata: pata_hpt37x: disable primary channel on HPT371

2022-03-02T10:32:04+00:00

commit 8d093e02e898b24c58788b0289e3202317a96d2a upstream.

The HPT371 chip physically has only one channel, the secondary one,
however the primary channel registers do exist! Thus we have to
manually disable the non-existing channel if the BIOS hasn't done this
already. Similarly to the pata_hpt3x2n driver, always disable the
primary channel.

Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Disable TRIM on M88V29

2022-02-23T10:56:41+00:00

[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ]

This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.

While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.

TRIM must be disabled for this device.

Signed-off-by: Zoltán Böszörményi 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

libata: add horkage for ASMedia 1092

2021-12-14T09:04:48+00:00

commit a66307d473077b7aeba74e9b09c841ab3d399c2d upstream.

The ASMedia 1092 has a configuration mode which will present a
dummy device; sadly the implementation falsely claims to provide
a device with 100M which doesn't actually exist.
So disable this device to avoid errors during boot.

Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl

2021-12-08T07:45:06+00:00

commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream.

Trying to remove the fsl-sata module in the PPC64 GNU/Linux
leads to the following warning:
 ------------[ cut here ]------------
 remove_proc_entry: removing non-empty directory 'irq/69',
   leaking at least 'fsl-sata[ff0221000.sata]'
 WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722
   .remove_proc_entry+0x20c/0x220
 IRQMASK: 0
 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220
 LR [c000000000338268] .remove_proc_entry+0x208/0x220
 Call Trace:
  .remove_proc_entry+0x208/0x220 (unreliable)
  .unregister_irq_proc+0x104/0x140
  .free_desc+0x44/0xb0
  .irq_free_descs+0x9c/0xf0
  .irq_dispose_mapping+0x64/0xa0
  .sata_fsl_remove+0x58/0xa0 [sata_fsl]
  .platform_drv_remove+0x40/0x90
  .device_release_driver_internal+0x160/0x2c0
  .driver_detach+0x64/0xd0
  .bus_remove_driver+0x70/0xf0
  .driver_unregister+0x38/0x80
  .platform_driver_unregister+0x14/0x30
  .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl]
 ---[ end trace 0ea876d4076908f5 ]---

The driver creates the mapping by calling irq_of_parse_and_map(),
so it also has to dispose the mapping. But the easy way out is to
simply use platform_get_irq() instead of irq_of_parse_map(). Also
we should adapt return value checking and propagate error values.

In this case the mapping is not managed by the device but by
the of core, so the device has not to dispose the mapping.

Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot 
Signed-off-by: Baokun Li 
Reviewed-by: Sergei Shtylyov 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman