linux-stable.git/drivers/ata, branch v4.17.3

libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk

2018-06-25T23:51:28+00:00

commit 2cfce3a86b64b53f0a70e92a6a659c720c319b45 upstream.

Commit 184add2ca23c ("libata: Apply NOLPM quirk for SanDisk
SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs.

This has lead to several reports of users of that SSD where LPM
was working fine and who know have a significantly increased idle
power consumption on their laptops.

Likely there is another problem on the T450s from the original
reporter which gets exposed by the uncore reaching deeper sleep
states (higher PC-states) due to LPM being enabled. The problem as
reported, a hardfreeze about once a day, already did not sound like
it would be caused by LPM and the reports of the SSD working fine
confirm this. The original reporter is ok with dropping the quirk.

A X250 user has reported the same hard freeze problem and for him
the problem went away after unrelated updates, I suspect some GPU
driver stack changes fixed things.

TL;DR: The original reporters problem were triggered by LPM but not
an LPM issue, so drop the quirk for the SSD in question.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207
Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones 
Cc: Lorenzo Dalrio 
Reported-by: Lorenzo Dalrio 
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo 
Acked-by: "Richard W.M. Jones" 
Signed-off-by: Greg Kroah-Hartman

libata: zpodd: small read overflow in eject_tray()

2018-06-25T23:51:27+00:00

commit 18c9a99bce2a57dfd7e881658703b5d7469cc7b9 upstream.

We read from the cdb[] buffer in ata_exec_internal_sg().  It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.

Fixes: 213342053db5 ("libata: handle power transition of ODD")
Signed-off-by: Dan Carpenter 
Signed-off-by: Tejun Heo 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

ahci: Add PCI ID for Cannon Lake PCH-LP AHCI

2018-05-24T14:03:32+00:00

This one should be using the default LPM policy for mobile chipsets so
add the PCI ID to the driver list of supported revices.

Signed-off-by: Mika Westerberg 
Signed-off-by: Tejun Heo 
Cc: stable@vger.kernel.org

libata: blacklist Micron 500IT SSD with MU01 firmware

2018-05-21T15:24:20+00:00

While whitelisting Micron M500DC drives, the tweaked blacklist entry
enabled queued TRIM from M500IT variants also. But these do not support
queued TRIM. And while using those SSDs with the latest kernel we have
seen errors and even the partition table getting corrupted.

Some part from the dmesg:
[    6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133
[    6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    6.741026] ata1.00: supports DRM functions and may not be fully accessible
[    6.759887] ata1.00: configured for UDMA/133
[    6.762256] scsi 0:0:0:0: Direct-Access     ATA      Micron_M500IT_MT MU01 PQ: 0 ANSI: 5

and then for the error:
[  120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen
[  120.860338] ata1.00: irq_stat 0x40000008
[  120.860342] ata1.00: failed command: SEND FPDMA QUEUED
[  120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout)
[  120.860353] ata1.00: status: { DRDY }
[  120.860543] ata1: hard resetting link
[  121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  121.166376] ata1.00: supports DRM functions and may not be fully accessible
[  121.186238] ata1.00: supports DRM functions and may not be fully accessible
[  121.204445] ata1.00: configured for UDMA/133
[  121.204454] ata1.00: device reported invalid CHS sector 0
[  121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[  121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current]
[  121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4
[  121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00
[  121.204559] print_req_error: I/O error, dev sda, sector 272512

After few reboots with these errors, and the SSD is corrupted.
After blacklisting it, the errors are not seen and the SSD does not get
corrupted any more.

Fixes: 243918be6393 ("libata: Do not blacklist Micron M500DC")
Cc: Martin K. Petersen 
Cc: stable@vger.kernel.org
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Tejun Heo

libata: Apply NOLPM quirk for SAMSUNG PM830 CXM13D1Q.

2018-05-14T15:31:51+00:00

Without this patch the drive errors out regularly:

[    1.090154] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 256GB,
CXM13D1Q, max UDMA/133
(...)
[  345.154996] ata1.00: exception Emask 0x40 SAct 0x0 SErr 0xc0800 action 0x6
[  345.155006] ata1.00: irq_stat 0x40000001
[  345.155013] ata1: SError: { HostInt CommWake 10B8B }
[  345.155018] ata1.00: failed command: SET FEATURES
[  345.155032] ata1.00: cmd ef/05:e1:00:00:00/00:00:00:00:00/40 tag 7
                        res 51/04:e1:00:00:00/00:00:00:00:00/40 Emask 0x41 (internal error)
[  345.155038] ata1.00: status: { DRDY ERR }
[  345.155042] ata1.00: error: { ABRT }
[  345.155051] ata1: hard resetting link
[  345.465661] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  345.466955] ata1.00: configured for UDMA/133
[  345.467085] ata1: EH complete

Signed-off-by: François Cami 
Acked-by: Hans de Goede 
Signed-off-by: Tejun Heo

libata: Blacklist some Sandisk SSDs for NCQ

2018-05-08T21:28:01+00:00

Sandisk SSDs SD7SN6S256G and SD8SN8U256G are regularly locking up
regularly under sustained moderate load with NCQ enabled.  Blacklist
for now.

Signed-off-by: Tejun Heo 
Reported-by: Dave Jones 
Cc: stable@vger.kernel.org

driver core: add printf verification to ata_ehi_pushv_desc

2018-05-07T15:32:20+00:00

__printf is useful to verify format and arguments. Remove the following
warning (with W=1):

  drivers/ata/libata-eh.c:183:10: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]

Signed-off-by: Mathieu Malaterre 
Signed-off-by: Tejun Heo

ata: fix spelling mistake: "directon" -> "direction"

2018-05-01T17:39:49+00:00

Trivial fix to spelling mistake in sil24_cerr_info message text

Signed-off-by: Colin Ian King 
Signed-off-by: Tejun Heo

libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs

2018-04-26T21:08:55+00:00

Richard Jones has reported that using med_power_with_dipm on a T450s
with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is
causing the machine to hang.

Switching the LPM to max_performance fixes this, so it seems that
this Sandisk SSD does not handle LPM well.

Note in the past there have been bug-reports about the following
Sandisk models not working with min_power, so we may need to extend
the quirk list in the future: name - firmware
Sandisk SD6SB2M512G1022I   - X210400
Sandisk SD6PP4M-256G-1006  - A200906

Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones 
Reported-and-tested-by: Richard W.M. Jones 
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo

libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSD

2018-04-26T18:46:23+00:00

Kevin Shanahan reports the following repeating errors when using LPM,
causing long delays accessing the disk:

  Apr 23 10:21:43 link kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen
  Apr 23 10:21:43 link kernel: ata1: SError: { PHYRdyChg CommWake }
  Apr 23 10:21:43 link kernel: ata1.00: failed command: WRITE DMA
  Apr 23 10:21:43 link kernel: ata1.00: cmd ca/00:08:60:5d:cd/00:00:00:00:00/e1 tag 9 dma 4096 out
                                        res 50/01:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  Apr 23 10:21:43 link kernel: ata1.00: status: { DRDY }
  Apr 23 10:21:43 link kernel: ata1.00: error: { AMNF }
  Apr 23 10:21:43 link kernel: ata1: hard resetting link
  Apr 23 10:21:43 link kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  Apr 23 10:21:43 link kernel: ata1.00: configured for UDMA/133
  Apr 23 10:21:43 link kernel: ata1: EH complete

These go away when switching from med_power_with_dipm to medium_power.

This is somewhat weird as the PM830 datasheet explicitly mentions DIPM
being supported and the idle power-consumption is specified with DIPM
enabled.

There are many OEM customized firmware versions for the PM830, so for now
lets assume this is firmware version specific and blacklist LPM based on
the firmware version.

Cc: Kevin Shanahan 
Reported-by: Kevin Shanahan 
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo