linux-stable.git/drivers/ata, branch v3.4.39

ata_piix: reenable MS Virtual PC guests

2013-03-14T18:29:42+00:00

commit d9904344fc4052fbe7e4dc137eba0dcdadf326bd upstream.

An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c ("ata_piix:
defer disks to the Hyper-V drivers by default") broke MS Virtual PC
guests. Hyper-V guests and Virtual PC guests have nearly identical DMI
info. As a result the driver does currently ignore the emulated hardware
in Virtual PC guests and defers the handling to hv_blkvsc. Since Virtual
PC does not offer paravirtualized drivers no disks will be found in the
guest.

One difference in the DMI info is the product version. This patch adds a
match for MS Virtual PC 2007 and "unignores" the emulated hardware.

This was reported for openSuSE 12.1 in bugzilla:
https://bugzilla.novell.com/show_bug.cgi?id=737532

Here is a detailed list of DMI info from example guests:

hwinfo --bios:

virtual pc guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "VS2005R2"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    Asset Tag: "7188-3705-6309-9738-9645-0364-00"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k8 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    Asset Tag: "7076-9522-6699-1042-9501-1785-77"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k12 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    Asset Tag: "8374-0485-4557-6331-0620-5845-25"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

Signed-off-by: Olaf Hering 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

ata_piix: Add Device IDs for Intel Wellsburg PCH

2013-03-03T22:06:45+00:00

commit 3aee8bc52c415aba8148f144e5e5359b0fd75dd1 upstream.

This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs

2013-03-03T22:06:45+00:00

commit aaa515277db9585eeb4fdeb4637b9f9df50a1dd9 upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

ahci: Add identifiers for ASM106x devices

2013-01-28T04:47:44+00:00

commit 7b4f6ecacb14f384adc1a5a67ad95eb082c02bd1 upstream.

They don't always appear as AHCI class devices but instead as IDE class.

Based on an initial patch by Hiroaki Nito

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804
Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik 
Signed-off-by: Abdallah Chatila 
Signed-off-by: Greg Kroah-Hartman

libata: ahci: Add support for Enmotus Bobcat device.

2013-01-28T04:47:42+00:00

commit 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 upstream.

Silicon does not support standard AHCI BAR assignment.  Add
vendor/device exception to force BAR 2.

Signed-off-by: Hugh Daschbach 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

libata: fix Null pointer dereference on disk error

2013-01-17T16:50:44+00:00

commit 26cd4d65deba587f3cf2329b6869ce02bcbe68ec upstream.

Following oops were observed when disk error happened:

[ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code
[ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00
[ 4272.896951] end_request: I/O error, dev sda, sector 5955239
[ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4291.658305] IP: [] ahci_activity_show+0x1/0x40
[ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0
[ 4291.783408] Oops: 0000 [#1] SMP
[ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity
[ 4291.934235] CPU 9
[ 4291.958301] Pid: 27942, comm: hwinfo ......

ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL.

Signed-off-by: Xiaotian Feng 
Cc: James Bottomley 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

libata: set dma_mode to 0xff in reset

2013-01-17T16:50:44+00:00

commit 5416912af75de9cba5d1c75b99a7888b0bbbd2fb upstream.

ata_device->dma_mode's initial value is zero, which is not a valid dma
mode, but ata_dma_enabled will return true for this value. This patch
sets dma_mode to 0xff in reset function, so that ata_dma_enabled will
not return true for this case, or it will cause problem for pata_acpi.

The corrsponding bugzilla page is at:
https://bugzilla.kernel.org/show_bug.cgi?id=49151

Reported-by: Phillip Wood 
Signed-off-by: Aaron Lu 
Tested-by: Szymon Janc 
Tested-by: Dutra Julio 
Acked-by: Alan Cox 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

sata_promise: fix hardreset lockdep error

2013-01-17T16:50:44+00:00

commit 3100d49d3cd236443faae9d81137c81b22d36003 upstream.

sata_promise's pdc_hard_reset_port() needs to serialize because it
flips a port-specific bit in controller register that's shared by
all ports. The code takes the ata host lock for this, but that's
broken because an interrupt may arrive on our irq during the hard
reset sequence, and that too will take the ata host lock. With
lockdep enabled a big nasty warning is seen.

Fixed by adding private state to the ata host structure, containing
a second lock used only for serializing the hard reset sequences.
This eliminated the lockdep warnings both on my test rig and on
the original reporter's machine.

Signed-off-by: Mikael Pettersson 
Tested-by: Adko Branil 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

sata_svw: check DMA start bit before reset

2012-12-03T19:47:11+00:00

commit b03e66a6be91f8389fcd902ab6c1563db1c9c06b upstream.

If kdump is triggered with pending IO, controller may not respond causing
kdump to fail.

http://marc.info/?l=linux-ide&m=133032255424658&w=2

During error recovery ata_do_dev_read_id never completes due hang
in mmio_insw.

ata_do_dev_read_id
 ata_sff_data_xfer
  ioread16_rep
   mmio_insw

if DMA start bit is cleared before reset, PIO command is successful
and kdump succeeds.

Signed-off-by: David Milburn 
Signed-off-by: Jeff Garzik 
Cc: CAI Qian 
Signed-off-by: Greg Kroah-Hartman

libata: Prevent interface errors with Seagate FreeAgent GoFlex

2012-10-02T17:30:35+00:00

commit c531077f40abc9f2129c4c83a30b3f8d6ce1c0e7 upstream.

When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure,
interface errors are always seen until 1.5Gbps is negotiated [1]. This
occurs using any disk in the enclosure, and when the disk is connected
directly with a generic passive eSATAp cable, we see stable 3Gbps
operation as expected.

Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset
and renegotiation incurs.

Signed-off-by: Daniel J Blueman 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman