linux-stable.git/drivers/ata, branch linux-6.8.y

ata: sata_gemini: Check clk_enable() result

2024-05-17T10:14:41+00:00

[ Upstream commit e85006ae7430aef780cc4f0849692e266a102ec0 ]

The call to clk_enable() in gemini_sata_start_bridge() can fail.
Add a check to detect such failure.

Signed-off-by: Chen Ni 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

ata: libata-scsi: Fix ata_scsi_dev_rescan() error path

2024-04-17T09:23:23+00:00

commit 79336504781e7fee5ddaf046dcc186c8dfdf60b1 upstream.

Commit 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
incorrectly handles failures of scsi_resume_device() in
ata_scsi_dev_rescan(), leading to a double call to
spin_unlock_irqrestore() to unlock a device port. Fix this by redefining
the goto labels used in case of errors and only unlock the port
scsi_scan_mutex when scsi_resume_device() fails.

Bug found with the Smatch static checker warning:

	drivers/ata/libata-scsi.c:4774 ata_scsi_dev_rescan()
	error: double unlocked 'ap->lock' (orig line 4757)

Reported-by: Dan Carpenter 
Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Reviewed-by: Niklas Cassel 
Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Allow command duration limits detection for ACS-4 drives

2024-04-17T09:23:23+00:00

commit c0297e7dd50795d559f3534887a6de1756b35d0f upstream.

Even though the command duration limits (CDL) feature was first added
in ACS-5 (major version 12), there are some ACS-4 (major version 11)
drives that implement CDL as well.

IDENTIFY_DEVICE, SUPPORTED_CAPABILITIES, and CURRENT_SETTINGS log pages
are mandatory in the ACS-4 standard so it should be safe to read these
log pages on older drives implementing the ACS-4 standard.

Fixes: 62e4a60e0cdb ("scsi: ata: libata: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

ata: sata_mv: Fix PCI device ID table declaration compilation warning

2024-04-10T14:38:14+00:00

[ Upstream commit 3137b83a90646917c90951d66489db466b4ae106 ]

Building with W=1 shows a warning for an unused variable when CONFIG_PCI
is diabled:

drivers/ata/sata_mv.c:790:35: error: unused variable 'mv_pci_tbl' [-Werror,-Wunused-const-variable]
static const struct pci_device_id mv_pci_tbl[] = {

Move the table into the same block that containsn the pci_driver
definition.

Fixes: 7bb3c5290ca0 ("sata_mv: Remove PCI dependency")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit

2024-04-10T14:38:12+00:00

[ Upstream commit 52f80bb181a9a1530ade30bc18991900bbb9697f ]

gcc warns about a memcpy() with overlapping pointers because of an
incorrect size calculation:

In file included from include/linux/string.h:369,
                 from drivers/ata/sata_sx4.c:66:
In function 'memcpy_fromio',
    inlined from 'pdc20621_get_from_dimm.constprop' at drivers/ata/sata_sx4.c:962:2:
include/linux/fortify-string.h:97:33: error: '__builtin_memcpy' accessing 4294934464 bytes at offsets 0 and [16, 16400] overlaps 6442385281 bytes at offset -2147450817 [-Werror=restrict]
   97 | #define __underlying_memcpy     __builtin_memcpy
      |                                 ^
include/linux/fortify-string.h:620:9: note: in expansion of macro '__underlying_memcpy'
  620 |         __underlying_##op(p, q, __fortify_size);                        \
      |         ^~~~~~~~~~~~~
include/linux/fortify-string.h:665:26: note: in expansion of macro '__fortify_memcpy_chk'
  665 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
      |                          ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/io.h:1184:9: note: in expansion of macro 'memcpy'
 1184 |         memcpy(buffer, __io_virt(addr), size);
      |         ^~~~~~

The problem here is the overflow of an unsigned 32-bit number to a
negative that gets converted into a signed 'long', keeping a large
positive number.

Replace the complex calculation with a more readable min() variant
that avoids the warning.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

scsi: sd: Fix TCG OPAL unlock on system resume

2024-04-03T13:32:45+00:00

commit 0c76106cb97548810214def8ee22700bbbb90543 upstream.

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") introduced the manage_system_start_stop scsi_device flag to
allow libata to indicate to the SCSI disk driver that nothing should be
done when resuming a disk on system resume. This change turned the
execution of sd_resume() into a no-op for ATA devices on system
resume. While this solved deadlock issues during device resume, this change
also wrongly removed the execution of opal_unlock_from_suspend().  As a
result, devices with TCG OPAL locking enabled remain locked and
inaccessible after a system resume from sleep.

To fix this issue, introduce the SCSI driver resume method and implement it
with the sd_resume() function calling opal_unlock_from_suspend(). The
former sd_resume() function is renamed to sd_resume_common() and modified
to call the new sd_resume() function. For non-ATA devices, this result in
no functional changes.

In order for libata to explicitly execute sd_resume() when a device is
resumed during system restart, the function scsi_resume_device() is
introduced. libata calls this function from the revalidation work executed
on devie resume, a state that is indicated with the new device flag
ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked
on resume, allowing normal operation.

Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

ahci: asm1064: asm1166: don't limit reported ports

2024-04-03T13:32:26+00:00

[ Upstream commit 6cd8adc3e18960f6e59d797285ed34ef473cc896 ]

Previously, patches have been added to limit the reported count of SATA
ports for asm1064 and asm1166 SATA controllers, as those controllers do
report more ports than physically having.

While it is allowed to report more ports than physically having in CAP.NP,
it is not allowed to report more ports than physically having in the PI
(Ports Implemented) register, which is what these HBAs do.
(This is a AHCI spec violation.)

Unfortunately, it seems that the PMP implementation in these ASMedia HBAs
is also violating the AHCI and SATA-IO PMP specification.

What these HBAs do is that they do not report that they support PMP
(CAP.SPM (Supports Port Multiplier) is not set).

Instead, they have decided to add extra "virtual" ports in the PI register
that is used if a port multiplier is connected to any of the physical
ports of the HBA.

Enumerating the devices behind the PMP as specified in the AHCI and
SATA-IO specifications, by using PMP READ and PMP WRITE commands to the
physical ports of the HBA is not possible, you have to use the "virtual"
ports.

This is of course bad, because this gives us no way to detect the device
and vendor ID of the PMP actually connected to the HBA, which means that
we can not apply the proper PMP quirks for the PMP that is connected to
the HBA.

Limiting the port map will thus stop these controllers from working with
SATA Port Multipliers.

This patch reverts both patches for asm1064 and asm1166, so old behavior
is restored and SATA PMP will work again, but it will also reintroduce the
(minutes long) extra boot time for the ASMedia controllers that do not
have a PMP connected (either on the PCIe card itself, or an external PMP).

However, a longer boot time for some, is the lesser evil compared to some
other users not being able to detect their drives at all.

Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports")
Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports")
Cc: stable@vger.kernel.org
Reported-by: Matt 
Signed-off-by: Conrad Kostecki 
Reviewed-by: Hans de Goede 
[cassel: rewrote commit message]
Signed-off-by: Niklas Cassel 
Signed-off-by: Sasha Levin

ata: libata-core: Do not call ata_dev_power_set_standby() twice

2024-02-21T18:09:17+00:00

For regular system shutdown, ata_dev_power_set_standby() will be
executed twice: once the scsi device is removed and another when
ata_pci_shutdown_one() executes and EH completes unloading the devices.

Make the second call to ata_dev_power_set_standby() do nothing by using
ata_dev_power_is_active() and return if the device is already in
standby.

Fixes: 2da4c5e24e86 ("ata: libata-core: Improve ata_dev_power_set_active()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Niklas Cassel

ata: ahci_ceva: fix error handling for Xilinx GT PHY support

2024-02-19T09:44:37+00:00

Platform clock and phy error resources are not cleaned up in Xilinx GT PHY
error path.

To fix introduce the function ceva_ahci_platform_enable_resources() which
is a customized version of ahci_platform_enable_resources() and inline with
SATA IP programming sequence it does:

- Assert SATA reset
- Program PS GTR phy
- Bring SATA by de-asserting the reset
- Wait for GT lane PLL to be locked

ceva_ahci_platform_enable_resources() is also used in the resume path
as the same SATA programming sequence (as in probe) should be followed.
Also cleanup the mixed usage of ahci_platform_enable_resources() and custom
implementation in the probe function as both are not required.

Fixes: 9a9d3abe24bb ("ata: ahci: ceva: Update the driver to support xilinx GT phy")
Signed-off-by: Radhey Shyam Pandey 
Reviewed-by: Damien Le Moal 
Signed-off-by: Niklas Cassel

ahci: asm1064: correct count of reported ports

2024-02-19T09:14:31+00:00

The ASM1064 SATA host controller always reports wrongly,
that it has 24 ports. But in reality, it only has four ports.

before:
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst

after:
ahci 0000:04:00.0: ASM1064 has only four ports
ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst

Signed-off-by: "Andrey Jr. Melnikov" 
Signed-off-by: Niklas Cassel