linux-stable.git/drivers/ata, branch linux-5.13.y

ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()

2021-09-18T11:42:05+00:00

[ Upstream commit 3ad4a31620355358316fa08fcfab37b9d6c33347 ]

Last change to device managed APIs cleaned up error path to simple phy_exit()
call, which in some cases has been executed with NULL parameter. This per se
is not a problem, but rather logical misconception: no need to free resource
when it's for sure has not been allocated yet. Fix the driver accordingly.

Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210727125130.19977-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs

2021-09-18T11:41:48+00:00

commit 8a6430ab9c9c87cb64c512e505e8690bbaee190b upstream.

Commit ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.

But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.

Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.

Fixes: ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475
Cc: stable@vger.kernel.org
Cc: Kate Hsuan 
Signed-off-by: Hans de Goede 
Reviewed-by: Damien Le Moal 
Reviewed-by: Martin K. Petersen 
Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

libata: fix ata_host_start()

2021-09-15T08:00:30+00:00

[ Upstream commit 355a8031dc174450ccad2a61c513ad7222d87a97 ]

The loop on entry of ata_host_start() may not initialize host->ops to a
non NULL value. The test on the host_stop field of host->ops must then
be preceded by a check that host->ops is not NULL.

Reported-by: kernel test robot 
Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Link: https://lore.kernel.org/r/20210816014456.2191776-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

libata: fix ata_pio_sector for CONFIG_HIGHMEM

2021-08-12T11:32:26+00:00

[ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ]

Data transfers are not required to be block aligned in memory, so they
span two pages.  Fix this by splitting the call to >sff_data_xfer into
two for that case.

This has been broken since the initial libata import before the damn
of git, but was uncovered by the legacy ide driver removal.

Reported-by: kernel test robot 
Signed-off-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

ata: ahci_sunxi: Disable DIPM

2021-07-19T08:04:50+00:00

commit f6bca4d91b2ea052e917cca3f9d866b5cc1d500a upstream.

DIPM is unsupported or broken on sunxi. Trying to enable the power
management policy med_power_with_dipm on an Allwinner A20 SoC based board
leads to immediate I/O errors and the attached SATA disk disappears from
the /dev filesystem. A reset (power cycle) is required to make the SATA
controller or disk work again. The A10 and A20 SoC data sheets and manuals
don't mention DIPM at all [1], so it's fair to assume that it's simply not
supported. But even if it was, it should be considered broken and best be
disabled in the ahci_sunxi driver.

[1] https://github.com/allwinner-zh/documents/tree/master/

Fixes: c5754b5220f0 ("ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Timo Sigurdsson 
Tested-by: Timo Sigurdsson 
Link: https://lore.kernel.org/r/20210614072539.3307-1-public_timo.s@silentcreek.de
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

pata_ep93xx: fix deferred probing

2021-07-14T15:06:42+00:00

[ Upstream commit 5c8121262484d99bffb598f39a0df445cecd8efb ]

The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing.  Propagate the error code
upstream, as it should have been done from the start...

Fixes: 2fff27512600 ("PATA host controller driver for ep93xx")
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/509fda88-2e0d-2cc7-f411-695d7e94b136@omprussia.ru
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

pata_octeon_cf: avoid WARN_ON() in ata_host_activate()

2021-07-14T15:06:40+00:00

[ Upstream commit bfc1f378c8953e68ccdbfe0a8c20748427488b80 ]

Iff platform_get_irq() fails (or returns IRQ0) and thus the polling mode
has to be used, ata_host_activate() hits the WARN_ON() due to 'irq_handler'
parameter being non-NULL if the polling mode is selected.  Let's only set
the pointer to the driver's IRQ handler if platform_get_irq() returns a
valid IRQ # -- this should avoid the unnecessary WARN_ON()...

Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/3a241167-f84d-1d25-5b9b-be910afbe666@omp.ru
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

pata_rb532_cf: fix deferred probing

2021-07-14T15:06:40+00:00

[ Upstream commit 2d3a62fbae8e5badc2342388f65ab2191c209cc0 ]

The driver overrides the error codes returned by platform_get_irq() to
-ENOENT, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/771ced55-3efb-21f5-f21c-b99920aae611@omprussia.ru
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

sata_highbank: fix deferred probing

2021-07-14T15:06:40+00:00

[ Upstream commit 4a24efa16e7db02306fb5db84518bb0a7ada5a46 ]

The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/105b456d-1199-f6e9-ceb7-ffc5ba551d1a@omprussia.ru
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

Merge tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2021-05-05T20:24:11+00:00

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Release OF node when pci_scan_device() fails (Dmitry Baryshkov)
   - Add pci_disable_parity() (Bjorn Helgaas)
   - Disable Mellanox Tavor parity reporting (Heiner Kallweit)
   - Disable N2100 r8169 parity reporting (Heiner Kallweit)
   - Fix RCiEP device to RCEC association (Qiuxu Zhuo)
   - Convert sysfs "config", "rom", "reset", "label", "index",
     "acpi_index" to static attributes to help fix races in device
     enumeration (Krzysztof Wilczyński)
   - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof
     Wilczyński)
   - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński)
   - Remove unused alloc_pci_root_info() return value (Krzysztof
     Wilczyński)

  PCI device hotplug:
   - Fix acpiphp reference count leak (Feilong Lin)

  Power management:
   - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki)
   - Fix runtime PM imbalance (Dinghao Liu)

  Virtualization:
   - Increase delay after FLR to work around Intel DC P4510 NVMe erratum
     (Raphael Norwitz)

  MSI:
   - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier)
   - For rcar, xilinx, use controller address as MSI doorbell (Marc
     Zyngier)
   - Remove unused hv msi_controller struct (Marc Zyngier)
   - Remove unused PCI core msi_controller support (Marc Zyngier)
   - Remove struct msi_controller altogether (Marc Zyngier)
   - Remove unused default_teardown_msi_irqs() (Marc Zyngier)
   - Let host bridges declare their reliance on MSI domains (Marc
     Zyngier)
   - Make pci_host_common_probe() declare its reliance on MSI domains
     (Marc Zyngier)
   - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner)
   - Document ways of ending up with NO_MSI (Marc Zyngier)
   - Refactor HT advertising of NO_MSI flag (Marc Zyngier)

  VPD:
   - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner
     Kallweit)
   - Remove sysfs VPD size checking dead code (Heiner Kallweit)
   - Convert VPF sysfs file to static attribute (Heiner Kallweit)
   - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit)
   - Tone down "missing VPD" message (Heiner Kallweit)

  Endpoint framework:
   - Fix NULL pointer dereference when epc_features not implemented
     (Shradha Todi)
   - Add missing destroy_workqueue() in endpoint test (Yang Yingliang)

  Amazon Annapurna Labs PCIe controller driver:
   - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann)
   - Fix "no symbols" warnings when compile testing with
     CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)

  APM X-Gene PCIe controller driver:
   - Fix cfg resource mapping regression (Dejin Zheng)

  Broadcom iProc PCIe controller driver:
   - Return zero for success of iproc_msi_irq_domain_alloc() (Pali
     Rohár)

  Broadcom STB PCIe controller driver:
   - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim
     Quinlan)
   - Fix use of BCM7216 reset controller (Jim Quinlan)
   - Use reset/rearm for Broadcom STB pulse reset instead of
     deassert/assert (Jim Quinlan)
   - Fix brcm_pcie_probe() error return for unsupported revision (Wei
     Yongjun)

  Cavium ThunderX PCIe controller driver:
   - Fix compile testing (Arnd Bergmann)
   - Fix "no symbols" warnings when compile testing with
     CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)

  Freescale Layerscape PCIe controller driver:
   - Fix ls_pcie_ep_probe() syntax error (comma for semicolon)
     (Krzysztof Wilczyński)
   - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency
     on ARCH_LAYERSCAPE (Geert Uytterhoeven)

  HiSilicon HIP PCIe controller driver:
   - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu)

  Intel Gateway PCIe controller driver:
   - Remove unused pcie_app_rd() (Jiapeng Chong)

  Intel VMD host bridge driver:
   - Program IRTE with Requester ID of VMD endpoint, not child device
     (Jon Derrick)
   - Disable VMD MSI-X remapping when possible so children can use more
     MSI-X vectors (Jon Derrick)

  MediaTek PCIe controller driver:
   - Configure FC and FTS for functions other than 0 (Ryder Lee)
   - Add YAML schema for MediaTek (Jianjun Wang)
   - Export pci_pio_to_address() for module use (Jianjun Wang)
   - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)
   - Add MediaTek MT8192 INTx support (Jianjun Wang)
   - Add MediaTek MT8192 MSI support (Jianjun Wang)
   - Add MediaTek MT8192 system power management support (Jianjun Wang)
   - Add missing MODULE_DEVICE_TABLE (Qiheng Lin)

  Microchip PolarFlare PCIe controller driver:
   - Make several symbols static (Wei Yongjun)

  NVIDIA Tegra PCIe controller driver:
   - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar)
   - Make several symbols const (Rikard Falkeborn)
   - Fix Kconfig host/endpoint typo (Wesley Sheng)

  SiFive FU740 PCIe controller driver:
   - Add pcie_aux clock to prci driver (Greentime Hu)
   - Use reset-simple in prci driver for PCIe (Greentime Hu)
   - Add SiFive FU740 PCIe host controller driver and DT binding (Paul
     Walmsley, Greentime Hu)

  Synopsys DesignWare PCIe controller driver:
   - Move MSI Receiver init to dw_pcie_host_init() so it is
     re-initialized along with the RC in resume (Jisheng Zhang)
   - Move iATU detection earlier to fix regression (Hou Zhiqiang)

  TI J721E PCIe driver:
   - Add DT binding and TI j721e support for refclk to PCIe connector
     (Kishon Vijay Abraham I)
   - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon
     Vijay Abraham I)

  TI Keystone PCIe controller driver:
   - Use generic config accessors for TI AM65x (K3) to fix regression
     (Kishon Vijay Abraham I)

  Xilinx NWL PCIe controller driver:
   - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar
     Gogada)
   - Add optional "dma-coherent" DT property (Bharat Kumar Gogada)

  Miscellaneous:
   - Fix kernel-doc warnings (Krzysztof Wilczyński)
   - Remove unused MicroGate SyncLink device IDs (Jiri Slaby)
   - Remove redundant dev_err() for devm_ioremap_resource() failure
     (Chen Hui)
   - Remove redundant initialization (Colin Ian King)
   - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof
     Wilczyński)"

* tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits)
  riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC
  PCI: fu740: Add SiFive FU740 PCIe host controller driver
  dt-bindings: PCI: Add SiFive FU740 PCIe host controller
  MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver
  clk: sifive: Use reset-simple in prci driver for PCIe driver
  clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
  PCI: brcmstb: Use reset/rearm instead of deassert/assert
  ata: ahci_brcm: Fix use of BCM7216 reset controller
  reset: add missing empty function reset_control_rearm()
  PCI: Allow VPD access for QLogic ISP2722
  PCI/VPD: Add helper pci_get_func0_dev()
  PCI/VPD: Remove pci_vpd_find_tag() SRDT handling
  PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument
  PCI/VPD: Change pci_vpd_init() return type to void
  PCI/VPD: Make missing VPD message less alarming
  PCI/VPD: Remove pci_set_vpd_size()
  x86/PCI: Remove unused alloc_pci_root_info() return value
  MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
  PCI: mediatek-gen3: Add system PM support
  PCI: mediatek-gen3: Add MSI support
  ...