linux-stable.git/drivers/ata/libata-core.c, branch v3.4

libata: init ata_print_id to 0

2012-05-03T18:07:59+00:00

When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the
following differences:

 -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
 -ata3: DUMMY
 +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
  ata4: DUMMY
  ata5: DUMMY
 -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47
 +ata6: DUMMY
 +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47

The change of numbering comes from commit 85d6725b7c0d7e3f ("libata:
make ata_print_id atomic") that changed lines like

	ap->print_id = ata_print_id++;
		to
	ap->print_id = atomic_inc_return(&ata_print_id);

As the latter behaves like ++ata_print_id, we must initialize
it to zero to start the numbering from one.

Signed-off-by: Tero Roponen 
Acked-by: Dan Williams 
Signed-off-by: Jeff Garzik

libata: make ata_print_id atomic

2012-04-12T19:57:51+00:00

This variable is incremented from multiple contexts (module_init via
libata-lldds and the libsas discovery thread).  Make it atomic to head
off any chance of libsas and libata creating duplicate ids.

Acked-by: Jacek Danecki 
Signed-off-by: Dan Williams 
Signed-off-by: Jeff Garzik

[SCSI] libsas: async ata scanning

2012-02-29T21:35:41+00:00

libsas ata error handling is already async but this does not help the
scan case.  Move initial link recovery out from under host->scan_mutex,
and delay synchronization with eh until after all port probe/recovery
work has been queued.

Device ordering is maintained with scan order by still calling
sas_rphy_add() in order of domain discovery.

Since we now scan the domain list when invoking libata-eh we need to be
careful to check for fully initialized ata ports.

Acked-by: Jack Wang 
Acked-by: Jeff Garzik 
Signed-off-by: Dan Williams 
Signed-off-by: James Bottomley

[libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list

2012-01-18T01:50:07+00:00

Signed-off-by: Jeff Garzik

ata: add ata port hibernate callbacks

2012-01-09T00:14:59+00:00

Signed-off-by: Lin Ming 
Signed-off-by: Jeff Garzik

ata: update ata port's runtime status during system resume

2012-01-09T00:14:59+00:00

The ata port is brought back to full power state during system resume.
So its runtime PM status will have to be updated to reflect
the actual post-system sleep status.

This also fixes below warning during system suspend/resume.

WARNING: at /work/linux/drivers/ata/libata-eh.c:4034
ata_scsi_port_error_handler+0x89/0x557()

4034         WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));

Signed-off-by: Lin Ming 
Signed-off-by: Jeff Garzik

libata-core: kill duplicate statement in ata_do_set_mode()

2012-01-09T00:14:58+00:00

Commit b3a706014e56b1356e7b275fd25b833c63175bf0 (libata: Add a
drivers/ide style DMA disable) neglected to remove the line in
ata_do_set_mode() it has obviously made useless/duplicated.  Do this
now, and make a line added back then wrapped properly...

Signed-off-by: Sergei Shtylyov 
Signed-off-by: Jeff Garzik

ata: add ata port runtime PM callbacks

2012-01-09T00:14:58+00:00

Add ata port runtime suspend/resume/idle callbacks.
Set ->eh_noresume to skip the runtime PM calls on scsi host
in the error handler to avoid dead lock.

Acked-by: Tejun Heo 
Signed-off-by: Lin Ming 
Signed-off-by: Jeff Garzik

ata: add ata port system PM callbacks

2012-01-09T00:14:58+00:00

Change ata_host_request_pm to ata_port_request_pm which performs
port suspend/resume.

Add ata port type driver which implements port PM callbacks.

Signed-off-by: Lin Ming 
Signed-off-by: Jeff Garzik

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2011-10-28T23:44:18+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...