linux-stable.git/drivers/ata/Makefile, branch linux-3.19.y

ata: Add support for the Tegra124 SATA controller

2014-07-18T21:52:33+00:00

This adds support for the integrated AHCI-compliant Serial ATA
controller present on the NVIDIA Tegra124 system-on-chip.

Signed-off-by: Mikko Perttunen 
Acked-by: Hans de Goede 
Signed-off-by: Tejun Heo

ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces

2014-05-04T19:28:59+00:00

The Marvell Armada 380 SoC includes two AHCI compatible
interfaces. However, like all DMA-capable Marvell interface, they
require special handling to configure MBus windows. Therefore, this
commit adds a new ahci_mvebu driver, which relies on the
libahci_platform.c code recently introduced.

Signed-off-by: Thomas Petazzoni 
Acked-by: Jason Cooper 
Signed-off-by: Tejun Heo

ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

2014-03-25T19:17:13+00:00

Add the new ahci_da850 host driver.

Platform changes needed to make DaVinci DA850 SATA AHCI support
fully functional are in the separate "ARM: davinci: da850: update
SATA AHCI support" commit.

Please note that this driver doesn't have the superfluous clock
control code as clock is already handled by the generic AHCI
platform library code.

Cc: Sekhar Nori 
Cc: Kevin Hilman 
Cc: Hans de Goede 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo

ata: move library code from ahci_platform.c to libahci_platform.c

2014-03-25T19:17:13+00:00

Move AHCI platform library code from ahci_platform.c to
libahci_platform.c and fix dependencies for ahci_st,
ahci_imx and ahci_sunxi drivers.

Acked-by: Hans de Goede 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo

ata: Add APM X-Gene SoC AHCI SATA host controller driver

2014-03-17T19:54:40+00:00

This patch adds support for the APM X-Gene SoC AHCI SATA host controller
driver. It requires the corresponding APM X-Gene SoC PHY driver. This
initial version only supports Gen3 speed.

Signed-off-by: Loc Ho 
Signed-off-by: Tuan Phan 
Signed-off-by: Suman Tripathi 
Reviewed-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo

ata: ahci_st: build fixes

2014-03-14T18:26:29+00:00

* The config option for ahci_st driver was renamed from
  CONFIG_SATA_AHCI_ST to CONFIG_AHCI_ST but Makefile was
  not updated.  Fix it (also while at it move the ahci_st
  driver entry below ahci_imx and ahci_sunxi ones).

* Fix a few build issues in the ahci_st driver itself.

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo

ahci: st: Add support for ST's SATA IP

2014-03-14T13:20:59+00:00

Acked-by: Alexandre Torgue 
Signed-off-by: Lee Jones 
Signed-off-by: Tejun Heo

ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform

2014-02-22T20:35:42+00:00

This patch adds support for the ahci sata controler found on Allwinner A10
and A20 SoCs to the ahci_platform driver.

Orignally written by Olliver Schinagl using the approach of having a platform
device which probe method creates a new child platform device which gets
driven by ahci_platform.c, as done by ahci_imx.c .

Refactored by Hans de Goede to add most of the non sunxi specific functionality
to ahci_platform.c and use a platform_data pointer from of_device_id for the
sunxi specific bits.

Signed-off-by: Olliver Schinagl 
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo

ahci_imx: add ahci sata support on imx platforms

2013-07-24T16:29:08+00:00

imx6q contains one Synopsys AHCI SATA controller, But it can't share
ahci_platform driver with other controllers because there are some
misalignments of the generic AHCI controller - the bits definitions of
the HBA registers, the Vendor Specific registers, the AHCI PHY clock
and the AHCI signals adjustment window(GPR13 register).

 - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0',
   should be configured to be '1'

 - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL
   should be set to be '1'.(default 0)

 - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be
   configured regarding to the frequency of AHB bus clock.

 - Configurations of the AHCI PHY clock, and the signal parameters of
   the GPR13

Setup its own ahci sata driver, contained the imx6q specific
initialized codes, re-use the generic ahci_platform driver, and keep
the generic ahci_platform driver clean as much as possible.

tj: patch description reformatted

Signed-off-by: Richard Zhu 
Reviewed-by: Shawn Guo 
Signed-off-by: Tejun Heo

libata: add R-Car SATA driver

2013-02-20T22:10:53+00:00

Add Renesas R-Car on-chip 3Gbps SATA controller driver.

Signed-off-by: Vladimir Barinov 
[Sergei: few bugs fixed, significant cleanup]
Signed-off-by: Sergei Shtylyov 
Signed-off-by: Jeff Garzik