linux-stable.git/drivers/acpi, branch v5.4.47

ACPI: PM: Avoid using power resources if there are none for D0

2020-06-17T14:40:28+00:00

commit 956ad9d98b73f59e442cc119c98ba1e04e94fe6d upstream.

As recently reported, some platforms provide a list of power
resources for device power state D3hot, through the _PR3 object,
but they do not provide a list of power resources for device power
state D0.

Among other things, this causes acpi_device_get_power() to return
D3hot as the current state of the device in question if all of the
D3hot power resources are "on", because it sees the power_resources
flag set and calls acpi_power_get_inferred_state() which finds that
D3hot is the shallowest power state with all of the associated power
resources turned "on", so that's what it returns.  Moreover, that
value takes precedence over the acpi_dev_pm_explicit_get() return
value, because it means a deeper power state.  The device may very
well be in D0 physically at that point, however.

Moreover, the presence of _PR3 without _PR0 for a given device
means that only one D3-level power state can be supported by it.
Namely, because there are no power resources to turn "off" when
transitioning the device from D0 into D3cold (which should be
supported since _PR3 is present), the evaluation of _PS3 should
be sufficient to put it straight into D3cold, but this means that
the effect of turning "on" the _PR3 power resources is unclear,
so it is better to avoid doing that altogether.  Consequently,
there is no practical way do distinguish D3cold from D3hot for
the device in question and the power states of it can be labeled
so that D3hot is the deepest supported one (and Linux assumes
that putting a device into D3hot via ACPI may cause power to be
removed from it anyway, for legacy reasons).

To work around the problem described above modify the ACPI
enumeration of devices so that power resources are only used
for device power management if the list of D0 power resources
is not empty and make it mart D3cold as supported only if that
is the case and the D3hot list of power resources is not empty
too.

Fixes: ef85bdbec444 ("ACPI / scan: Consolidate extraction of power resources lists")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205057
Link: https://lore.kernel.org/linux-acpi/20200603194659.185757-1-hdegoede@redhat.com/
Reported-by: Hans de Goede 
Tested-by: Hans de Goede 
Tested-by: youling257@gmail.com
Cc: 3.10+  # 3.10+
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

ACPI: GED: add support for _Exx / _Lxx handler methods

2020-06-17T14:40:28+00:00

commit ea6f3af4c5e63f6981c0b0ab8ebec438e2d5ef40 upstream.

Per the ACPI spec, interrupts in the range [0, 255] may be handled
in AML using individual methods whose naming is based on the format
_Exx or _Lxx, where xx is the hex representation of the interrupt
index.

Add support for this missing feature to our ACPI GED driver.

Cc: v4.9+  # v4.9+
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()

2020-06-17T14:40:28+00:00

commit 4d8be4bc94f74bb7d096e1c2e44457b530d5a170 upstream.

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.

Fixes: 158c998ea44b ("ACPI / CPPC: add sysfs support to compute delivered performance")
Signed-off-by: Qiushi Wu 
Cc: 4.10+  # 4.10+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()

2020-06-17T14:40:28+00:00

commit 6e6c25283dff866308c87b49434c7dbad4774cc0 upstream.

kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.

Fixes: 3f8055c35836 ("ACPI / hotplug: Introduce user space interface for hotplug profiles")
Signed-off-by: Qiushi Wu 
Cc: 3.10+  # 3.10+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI: EC: PM: Avoid flushing EC work when EC GPE is inactive

2020-05-27T15:46:10+00:00

[ Upstream commit 607b9df63057a56f6172d560d5366cca6a030c76 ]

Flushing the EC work while suspended to idle when the EC GPE status
is not set causes some EC wakeup events (notably power button and
lid ones) to be missed after a series of spurious wakeups on the Dell
XPS13 9360 in my office.

If that happens, the machine cannot be woken up from suspend-to-idle
by the power button or lid status change and it needs to be woken up
in some other way (eg. by a key press).

Flushing the EC work only after successful dispatching the EC GPE,
which means that its status has been set, avoids the issue, so change
the code in question accordingly.

Fixes: 7b301750f7f8 ("ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()")
Cc: 5.4+  # 5.4+
Signed-off-by: Rafael J. Wysocki 
Tested-by: Chris Chiu 
Signed-off-by: Sasha Levin

ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()

2020-05-20T06:20:18+00:00

[ Upstream commit 7b301750f7f8f6503e11f1af4a03832525f58c66 ]

If the EC GPE status is not set after checking all of the other GPEs,
acpi_s2idle_wake() returns 'false', to indicate that the SCI event
that has just triggered is not a system wakeup one, but it does that
without canceling the pending wakeup and re-arming the SCI for system
wakeup which is a mistake, because it may cause s2idle_loop() to busy
spin until the next valid wakeup event.  [If that happens, the first
spurious wakeup is still pending after acpi_s2idle_wake() has
returned, so s2idle_enter() does nothing, acpi_s2idle_wake()
is called again and it sees that the SCI has triggered, but no GPEs
are active, so 'false' is returned again, and so on.]

Fix that by moving all of the GPE checking logic from
acpi_s2idle_wake() to acpi_ec_dispatch_gpe() and making the
latter return 'true' only if a non-EC GPE has triggered and
'false' otherwise, which will cause acpi_s2idle_wake() to
cancel the pending SCI wakeup and re-arm the SCI for system
wakeup regardless of the EC GPE status.

This also addresses a lockup observed on an Elitegroup EF20EA laptop
after attempting to wake it up from suspend-to-idle by a key press.

Fixes: d5406284ff80 ("ACPI: PM: s2idle: Refine active GPEs check")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207603
Reported-by: Todd Brandt 
Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Link: https://lore.kernel.org/linux-acpi/CAB4CAwdqo7=MvyG_PE+PGVfeA17AHF5i5JucgaKqqMX6mjArbQ@mail.gmail.com/
Reported-by: Chris Chiu 
Tested-by: Chris Chiu 
Cc: 5.4+  # 5.4+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()

2020-05-10T08:31:32+00:00

commit 243a98894dc525ad2fbeb608722fcb682be3186d upstream.

Fix a comment in acpi_s2idle_prepare_late() that has become outdated
after commit f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work").

Fixes: f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work")
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM: ACPI: Output correct message on target power state

2020-05-06T06:15:09+00:00

commit a9b760b0266f563b4784f695bbd0e717610dc10a upstream.

Transitioned power state logged at the end of setting ACPI power.

However, D3cold won't be in the message because state can only be
D3hot at most.

Use target_state to corretly report when power state is D3cold.

Cc: All applicable 
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Fixes for acpiExec namespace init file

2020-04-23T08:36:39+00:00

[ Upstream commit 9a1ae80412dcaa67a29eecf19de44f32b5f1c357 ]

This is the result of squashing the following ACPICA commit ID's:
6803997e5b4f3635cea6610b51ff69e29d251de3
f31cdf8bfda22fe265c1a176d0e33d311c82a7f7

This change fixes several problems with the support for the
acpi_exec namespace init file (-fi option). Specifically, it
fixes AE_ALREADY_EXISTS errors, as well as various seg faults.

Link: https://github.com/acpica/acpica/commit/f31cdf8b
Link: https://github.com/acpica/acpica/commit/6803997e
Signed-off-by: Bob Moore 
Signed-off-by: Erik Kaneda 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

x86: ACPI: fix CPU hotplug deadlock

2020-04-23T08:36:38+00:00

[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ]

Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():

"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.

It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.

Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."

 WARNING: possible circular locking dependency detected
 ------------------------------------------------------
 cpuhp/1/15 is trying to acquire lock:
 ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630

 but task is already holding lock:
 ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
 cpus_read_lock+0x3e/0xc0
 irq_calc_affinity_vectors+0x5f/0x91
 __pci_enable_msix_range+0x10f/0x9a0
 pci_alloc_irq_vectors_affinity+0x13e/0x1f0
 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
 pqi_ctrl_init+0x72f/0x1618 [smartpqi]
 pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
 local_pci_probe+0x7a/0xc0
 work_for_cpu_fn+0x2e/0x50
 process_one_work+0x57e/0xb90
 worker_thread+0x363/0x5b0
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 other info that might help us debug this:

 Chain exists of:
 (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock

 Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
 lock(cpuidle_lock);
                         lock(cpuhp_state-up);
                         lock(cpuidle_lock);
 lock((work_completion)(&wfc.work));

 *** DEADLOCK ***

 3 locks held by cpuhp/1/15:
 #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 Call Trace:
 dump_stack+0xa0/0xea
 print_circular_bug.cold.52+0x147/0x14c
 check_noncircular+0x295/0x2d0
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

Signed-off-by: Qian Cai 
Tested-by: Borislav Petkov 
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin