linux-stable.git/drivers/acpi, branch v5.17.7 Linux kernel stable tree ACPI: processor: idle: Avoid falling back to C3 type C-states 2022-05-09T07:16:30+00:00 Ville Syrjälä ville.syrjala@linux.intel.com 2022-04-21T13:36:34+00:00 b3b0ca1c324982fcc005063af045439670e16aa3 commit fc45e55ebc58dbf622cb89ddbf797589c7a5510b upstream. The "safe state" index is used by acpi_idle_enter_bm() to avoid entering a C-state that may require bus mastering to be disabled on entry in the cases when this is not going to happen. For this reason, it should not be set to point to C3 type of C-states, because they may require bus mastering to be disabled on entry in principle. This was broken by commit d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state") which inadvertently allowed the "safe state" index to point to C3 type of C-states. This results in a machine that won't boot past the point when it first enters C3. Restore the correct behaviour (either demote to C1/C2, or use C3 but also set ARB_DIS=1). I hit this on a Fujitsu Siemens Lifebook S6010 (P3) machine. Fixes: d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state") Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Woody Suwalski <wsuwalski@gmail.com> [ rjw: Subject and changelog adjustments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc45e55ebc58dbf622cb89ddbf797589c7a5510b upstream.

The "safe state" index is used by acpi_idle_enter_bm() to avoid
entering a C-state that may require bus mastering to be disabled
on entry in the cases when this is not going to happen.  For this
reason, it should not be set to point to C3 type of C-states, because
they may require bus mastering to be disabled on entry in principle.

This was broken by commit d6b88ce2eb9d ("ACPI: processor idle: Allow
playing dead in C3 state") which inadvertently allowed the "safe
state" index to point to C3 type of C-states.

This results in a machine that won't boot past the point when it first
enters C3. Restore the correct behaviour (either demote to C1/C2, or
use C3 but also set ARB_DIS=1).

I hit this on a Fujitsu Siemens Lifebook S6010 (P3) machine.

Fixes: d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Woody Suwalski <wsuwalski@gmail.com>
[ rjw: Subject and changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40" 2022-05-09T07:16:29+00:00 Ville Syrjälä ville.syrjala@linux.intel.com 2022-04-20T13:44:17+00:00 14defb873c1dc4cef1e7e7951f47f019821734fc commit 20e582e16af24b074e583f9551fad557882a3c9d upstream. This reverts commit bfe55a1f7fd6bfede16078bf04c6250fbca11588. This was presumably misdiagnosed as an inability to use C3 at all when I suspect the real problem is just misconfiguration of C3 vs. ARB_DIS. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Tested-by: Woody Suwalski <wsuwalski@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 20e582e16af24b074e583f9551fad557882a3c9d upstream.

This reverts commit bfe55a1f7fd6bfede16078bf04c6250fbca11588.

This was presumably misdiagnosed as an inability to use C3 at
all when I suspect the real problem is just misconfiguration of
C3 vs. ARB_DIS.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Tested-by: Woody Suwalski <wsuwalski@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI: processor idle: Check for architectural support for LPI 2022-04-20T07:36:06+00:00 Mario Limonciello mario.limonciello@amd.com 2022-02-25T19:06:46+00:00 7fb0cd571e86fea3f4335f367886cbf5ad6572d0 commit eb087f305919ee8169ad65665610313e74260463 upstream. When `osc_pc_lpi_support_confirmed` is set through `_OSC` and `_LPI` is populated then the cpuidle driver assumes that LPI is fully functional. However currently the kernel only provides architectural support for LPI on ARM. This leads to high power consumption on X86 platforms that otherwise try to enable LPI. So probe whether or not LPI support is implemented before enabling LPI in the kernel. This is done by overloading `acpi_processor_ffh_lpi_probe` to check whether it returns `-EOPNOTSUPP`. It also means that all future implementations of `acpi_processor_ffh_lpi_probe` will need to follow these semantics as well. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eb087f305919ee8169ad65665610313e74260463 upstream.

When `osc_pc_lpi_support_confirmed` is set through `_OSC` and `_LPI` is
populated then the cpuidle driver assumes that LPI is fully functional.

However currently the kernel only provides architectural support for LPI
on ARM.  This leads to high power consumption on X86 platforms that
otherwise try to enable LPI.

So probe whether or not LPI support is implemented before enabling LPI in
the kernel.  This is done by overloading `acpi_processor_ffh_lpi_probe` to
check whether it returns `-EOPNOTSUPP`. It also means that all future
implementations of `acpi_processor_ffh_lpi_probe` will need to follow
these semantics as well.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "ACPI: processor: idle: Only flush cache on entering C3" 2022-04-13T17:27:40+00:00 Akihiko Odaki akihiko.odaki@gmail.com 2022-04-03T06:23:22+00:00 698de7a78f44433cbde6ba4d36248abe50e2d951 commit dfbba2518aac4204203b0697a894d3b2f80134d3 upstream. Revert commit 87ebbb8c612b ("ACPI: processor: idle: Only flush cache on entering C3") that broke the assumptions of the acpi_idle_play_dead() callers. Namely, the CPU cache must always be flushed in acpi_idle_play_dead(), regardless of the target C-state that is going to be requested, because this is likely to be part of a CPU offline procedure or preparation for entering a system-wide sleep state and the lack of synchronization between the CPU cache and RAM may lead to problems going forward, for example when the CPU is brought back online. In particular, it breaks resume from suspend-to-RAM on Lenovo ThinkPad C13 which fails occasionally until the problematic commit is reverted. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Ketsui <esgwpl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dfbba2518aac4204203b0697a894d3b2f80134d3 upstream.

Revert commit 87ebbb8c612b ("ACPI: processor: idle: Only flush cache
on entering C3") that broke the assumptions of the acpi_idle_play_dead()
callers.

Namely, the CPU cache must always be flushed in acpi_idle_play_dead(),
regardless of the target C-state that is going to be requested, because
this is likely to be part of a CPU offline procedure or preparation for
entering a system-wide sleep state and the lack of synchronization
between the CPU cache and RAM may lead to problems going forward, for
example when the CPU is brought back online.

In particular, it breaks resume from suspend-to-RAM on Lenovo ThinkPad
C13 which fails occasionally until the problematic commit is reverted.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ketsui <esgwpl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data 2022-04-08T11:58:58+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2022-03-22T16:02:05+00:00 d7339f2a3938fb56b5f28d53f5345900b5fa0e74 commit 40d8abf364bcab23bc715a9221a3c8623956257b upstream. If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC") BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 40d8abf364bcab23bc715a9221a3c8623956257b upstream.

If the NumEntries field in the _CPC return package is less than 2, do
not attempt to access the "Revision" element of that package, because
it may not be present then.

Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC")
BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI/APEI: Limit printable size of BERT table data 2022-04-08T11:58:38+00:00 Darren Hart darren@os.amperecomputing.com 2022-03-08T18:50:48+00:00 5a3ff7b2f3a3ef6b83019e0eb19c18e48e921862 [ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ] Platforms with large BERT table data can trigger soft lockup errors while attempting to print the entire BERT table data to the console at boot: watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1] Observed on Ampere Altra systems with a single BERT record of ~250KB. The original bert driver appears to have assumed relatively small table data. Since it is impractical to reassemble large table data from interwoven console messages, and the table data is available in /sys/firmware/acpi/tables/data/BERT limit the size for tables printed to the console to 1024 (for no reason other than it seemed like a good place to kick off the discussion, would appreciate feedback from existing users in terms of what size would maintain their current usage model). Alternatively, we could make printing a CONFIG option, use the bert_disable boot arg (or something similar), or use a debug log level. However, all those solutions require extra steps or change the existing behavior for small table data. Limiting the size preserves existing behavior on existing platforms with small table data, and eliminates the soft lockups for platforms with large table data, while still making it available. Signed-off-by: Darren Hart <darren@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]

Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:

  watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]

Observed on Ampere Altra systems with a single BERT record of ~250KB.

The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in

  /sys/firmware/acpi/tables/data/BERT

limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).

Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.

Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L 2022-04-08T11:58:38+00:00 Hans de Goede hdegoede@redhat.com 2022-02-23T13:50:32+00:00 16e614d1b0f93a7e61e2261efc14523db6469ed7 [ Upstream commit 4fecb1e93e4914fc0bc1fb467ca79741f9f94abb ] The Yoga Tablet 1050F/L is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there, causing various resource conflicts (the Android x86 kernel fork ignores I2C devices described in the DSDT). Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the acpi_quirk_skip_dmi_ids table to woraround this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4fecb1e93e4914fc0bc1fb467ca79741f9f94abb ]

The Yoga Tablet 1050F/L is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).

Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8 2022-04-08T11:58:38+00:00 Hans de Goede hdegoede@redhat.com 2022-02-23T13:50:31+00:00 39db8a6886b75611b75c7a79c4b6f409a4dea6f0 [ Upstream commit f38312c9b569322edf4baae467568206fe46d57b ] The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there, causing various resource conflicts (the Android x86 kernel fork ignores I2C devices described in the DSDT). Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the acpi_quirk_skip_dmi_ids table to woraround this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f38312c9b569322edf4baae467568206fe46d57b ]

The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).

Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ACPICA: Avoid walking the ACPI Namespace if it is not there 2022-04-08T11:58:38+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2022-03-07T19:28:26+00:00 790ae2e5abe027f3c0eebabbf3a7c36766752d80 [ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ] ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc Prevent acpi_ns_walk_namespace() from crashing when called with start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been instantiated yet and acpi_gbl_root_node is NULL. For instance, this can happen if the kernel is run with "acpi=off" in the command line. Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/ Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]

ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc

Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.

For instance, this can happen if the kernel is run with "acpi=off"
in the command line.

Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ACPI: APEI: fix return value of __setup handlers 2022-04-08T11:57:37+00:00 Randy Dunlap rdunlap@infradead.org 2022-03-06T02:46:20+00:00 434e0dffd4457e22f5aee45a61de15b42de7ab6f [ Upstream commit f3303ff649dbf7dcdc6a6e1a922235b12b3028f4 ] __setup() handlers should return 1 to indicate that the boot option has been handled. Returning 0 causes a boot option to be listed in the Unknown kernel command line parameters and also added to init's arg list (if no '=' sign) or environment list (if of the form 'a=b'). Unknown kernel command line parameters "erst_disable bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init erst_disable bert_disable hest_disable with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support") Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support") Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f3303ff649dbf7dcdc6a6e1a922235b12b3028f4 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled. Returning 0 causes a boot option to be listed in
the Unknown kernel command line parameters and also added to init's
arg list (if no '=' sign) or environment list (if of the form 'a=b').

Unknown kernel command line parameters "erst_disable
  bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be
  passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
     erst_disable
     bert_disable
     hest_disable
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc6

Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support")
Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support")
Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>