Pull arm64 fixes from Will Deacon:
 "The main changes are relating to our handling of access/dirty bits,
  where our low-level page-table helpers could lead to stale young
  mappings and loss of the dirty bit in some cases (the latter has not
  been observed in practice, but could happen when clearing "soft-dirty"
  if we enabled that). These were posted as part of a larger series, but
  the rest of that is less urgent and needs a v2 which I'll get to
  shortly.

  In other news, we've now got a set of fixes to resolve the
  lockdep/tracing problems that have been plaguing us for a while, but
  they're still a bit "fresh" and I plan to send them to you next week
  after we've got some more confidence in them (although initial CI
  results look good).

  Summary:

   - Fix kerneldoc warnings generated by ACPI IORT code

   - Fix pte_accessible() so that access flag is ignored

   - Fix missing header #include

   - Fix loss of software dirty bit across pte_wrprotect() when HW DBM
     is enabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
  arm64: pgtable: Fix pte_accessible()
  ACPI/IORT: Fix doc warnings in iort.c
  arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build

Fix following warnings caused by mismatch between
function parameters and function comments.

drivers/acpi/arm64/iort.c:55: warning: Function parameter or member 'iort_node' not described in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:55: warning: Excess function parameter 'node' description in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'id' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'bus_token' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Excess function parameter 'req_id' description in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:1142: warning: Function parameter or member 'dma_size' not described in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1142: warning: Excess function parameter 'size' description in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1534: warning: Function parameter or member 'ops' not described in 'iort_add_platform_device'

Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20201014093139.1580-1-shiju.jose@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

* acpi-fan:
  ACPI: fan: Initialize performance state sysfs attribute

From commit 6915564dc5a8 ("ACPI: OSL: Change the type of
acpi_os_map_generic_address() return value"),
acpi_os_map_generic_address() will return logical address or NULL
for error, but for ACPI_ADR_SPACE_SYSTEM_IO case, it should be also
return 0 as it's a normal case, but now it will return -ENXIO.

So check it out for such case to avoid einj module initialization
fail.

Fixes: 6915564dc5a8 ("ACPI: OSL: Change the type of acpi_os_map_generic_address() return value")
Cc: <stable@vger.kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The following warning is reported if lock debugging is enabled.

DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:4617 lockdep_init_map_waits+0x141/0x222
...
Call Trace:
 __kernfs_create_file+0x7a/0xd8
 sysfs_add_file_mode_ns+0x135/0x189
 sysfs_create_file_ns+0x70/0xa0
 acpi_fan_probe+0x547/0x621
 platform_drv_probe+0x67/0x8b
 ...

Dynamically allocated sysfs attributes need to be initialized to avoid
the warning.

Fixes: d19e470b6605 ("ACPI: fan: Expose fan performance state information")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* acpi-scan:
  ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name

* acpi-misc:
  ACPI: GED: fix -Wformat
  ACPI: Fix whitespace inconsistencies

* acpi-button:
  ACPI: button: Add DMI quirk for Medion Akoya E2228T

* acpi-dptf:
  ACPI: DPTF: Support Alder Lake

Add Alder Lake ACPI IDs for DPTF devices.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The Medion Akoya E2228T's ACPI _LID implementation is quite broken,
it has the same issues as the one from the Medion Akoya E2215T:

1. For notifications it uses an ActiveLow Edge GpioInt, rather then
   an ActiveBoth one, meaning that the device is only notified when the
   lid is closed, not when it is opened.

2. Matching with this its _LID method simply always returns 0 (closed)

In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN,
add a DMI quirk for this.

While working on this I also found out that the MD60### part of the model
number differs per country/batch while all of the E2215T and E2228T models
have this issue, so also remove the " MD60198" part from the E2215T quirk.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Clang is more aggressive about -Wformat warnings when the format flag
specifies a type smaller than the parameter. It turns out that gsi is an
int. Fixes:

drivers/acpi/evged.c:105:48: warning: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Wformat]
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
                                            ^~~

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Fixes: ea6f3af4c5e6 ("ACPI: GED: add support for _Exx / _Lxx handler methods")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replaces spaces with tabs where spaces have been (inconsistently) used
for indentation and removes trailing whitespaces.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>