linux-stable.git/drivers/acpi, branch v4.9.95

nfit: fix region registration vs block-data-window ranges

2018-04-20T06:21:06+00:00

commit 8d0d8ed3356aa9ed43b819aaedd39b08ca453007 upstream.

Commit 1cf03c00e7c1 "nfit: scrub and register regions in a workqueue"
mistakenly attempts to register a region per BLK aperture. There is
nothing to register for individual apertures as they belong as a set to
a BLK aperture group that are registered with a corresponding
DIMM-control-region. Filter them for registration to prevent some
needless devm_kzalloc() allocations.

Cc: 
Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue")
Reviewed-by: Dave Jiang 
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Disassembler: Abort on an invalid/unknown AML opcode

2018-04-13T17:48:28+00:00

[ Upstream commit 6f0527b77d9e0129dd8e50945b0d610ed943d6b2 ]

ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb

An invalid opcode indicates something seriously wrong with the
input AML file. The AML parser is immediately confused and lost,
causing the resulting parse tree to be ill-formed. The actual
disassembly can then cause numerous unrelated errors and faults.

This change aborts the disassembly upon discovery of such an
opcode during the AML parse phase.

Link: https://github.com/acpica/acpica/commit/ed0389cb
Signed-off-by: Bob Moore 
Signed-off-by: Lv Zheng 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Events: Add runtime stub support for event APIs

2018-04-13T17:48:28+00:00

[ Upstream commit 861ba6351c520328e94a78c923b415faa9116287 ]

ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce

It is reported that on Linux, RTC driver complains wrong errors on
hardware reduced platform:
  [    4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654)

This patch fixes this by correctly adding runtime reduced hardware check.
Reported by Chandan Tagore, fixed by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/99bc3bec
Tested-by: Chandan Tagore 
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI: EC: Fix debugfs_create_*() usage

2018-04-13T17:48:10+00:00

[ Upstream commit 3522f867c13b63cf62acdf1b8ca5664c549a716a ]

acpi_ec.gpe is "unsigned long", hence treating it as "u32" would expose
the wrong half on big-endian 64-bit systems.  Fix this by changing its
type to "u32" and removing the cast, as all other code already uses u32
or sometimes even only u8.

Fixes: 1195a098168fcacf (ACPI: Provide /sys/kernel/debug/ec/...)
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / video: Default lcd_only to true on Win8-ready and newer machines

2018-04-13T17:48:09+00:00

[ Upstream commit 5928c281524fe451114e04f1dfa11246a37e859f ]

We're seeing a lot of bogus backlight interfaces on newer machines without
a LCD such as desktops, servers and HDMI sticks. This causes userspace to
show a non-functional brightness slider in e.g. the GNOME3 system menu,
which is undesirable. And, in general, we should simply just not register
a non functional backlight interface.

Checking the LCD flag causes the bogus acpi_video backlight interfaces to
go away (on the machines this was tested on).

This change sets the lcd_only option by default on any machines which
are Win8-ready, to fix this.

This is not entirely without a risk of regressions, but video_detect.c
already prefers native-backlight interfaces over the acpi_video one
on Win8-ready machines, calling acpi_video_unregister_backlight() as soon
as a native interface shows up. This is done because the ACPI backlight
interface often is broken on Win8-ready machines, because win8 does not
seem to actually use it.

So in practice we already end up not registering the ACPI backlight
interface on (most) Win8-ready machines with a LCD panel, thus this
change does not change anything for (most) machines with a LCD panel
and on machines without a LCD panel we actually don't want to register
any backlight interfaces.

This has been tested on the following machines and fixes a bogus backlight
interface showing up there:
 - Desktop with an Asrock B150M Pro4S/D3 m.b. using i5-6500 builtin gfx
 - Intel Compute Stick STK1AW32SC
 - Meegopad T08 HDMI stick

Bogus backlight interfaces have also been reported on:
 - Desktop with Asus H87I-Plus m.b.
 - Desktop with ASRock B75M-ITX m.b.
 - Desktop with Gigabyte Z87-D3HP m.b.
 - Dell PowerEdge T20 desktop

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133327
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133329
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133646
Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / watchdog: Fix off-by-one error at resource assignment

2018-03-28T16:39:22+00:00

commit b1abf6fc49829d89660c961fafe3f90f3d843c55 upstream.

The resource allocation in WDAT watchdog has off-one-by error, it sets
one byte more than the actual end address.  This may eventually lead
to unexpected resource conflicts.

Fixes: 058dfc767008 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Cc: 4.9+  # 4.9+
Signed-off-by: Takashi Iwai 
Acked-by: Mika Westerberg 
Acked-by: Guenter Roeck 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

acpi, numa: fix pxm to online numa node associations

2018-03-28T16:39:22+00:00

commit dc9e0a9347e932e3fd3cd03e7ff241022ed6ea8a upstream.

Commit 99759869faf1 "acpi: Add acpi_map_pxm_to_online_node()" added
support for mapping a given proximity to its nearest, by SLIT distance,
online node. However, it sometimes returns unexpected results due to the
fact that it switches from comparing the PXM node to the last node that
was closer than the current max.

    for_each_online_node(n) {
            dist = node_distance(node, n);
            if (dist < min_dist) {
                    min_dist = dist;
                    node = n;	<---- from this point we're using the
				      wrong node for node_distance()


Fixes: 99759869faf1 ("acpi: Add acpi_map_pxm_to_online_node()")
Cc: 
Reviewed-by: Toshi Kani 
Acked-by: Rafael J. Wysocki >
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

ACPI / power: Delay turning off unused power resources after suspend

2018-03-24T10:00:20+00:00

[ Upstream commit 8ece1d83346bcc431090d59a2184276192189cdd ]

Commit 660b1113e0f3 (ACPI / PM: Fix consistency check for power resources
during resume) introduced a check for ACPI power resources which have
been turned on by the BIOS during suspend and turns these back off again.

This is causing problems on a Dell Venue Pro 11 7130 (i5-4300Y) it causes
the following messages to show up in dmesg:

[  131.014605] ACPI: Waking up from system sleep state S3
[  131.150271] acpi LNXPOWER:07: Turning OFF
[  131.150323] acpi LNXPOWER:06: Turning OFF
[  131.150911] acpi LNXPOWER:00: Turning OFF
[  131.169014] ACPI : EC: interrupt unblocked
[  131.181811] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  133.535728] pci_raw_set_power_state: 76 callbacks suppressed
[  133.535735] iwlwifi 0000:01:00.0: Refused to change power state,
               currently in D3
[  133.597672] PM: noirq resume of devices complete after 2428.891 msecs

Followed by a bunch of iwlwifi errors later on and the pcie device
dropping from the bus (acpiphp thinks it has been unplugged).

Disabling the turning off of unused power resources fixes this. Instead
of adding a quirk for this system, this commit fixes this by moving the
disabling of unused power resources to later in the resume sequence
when the iwlwifi card has been moved out of D3 so the ref_count for
its power resource no longer is 0.

This new behavior seems to match the intend of the original commit which
commit-msg says: "(... which means that no devices are going to need them
any time soon) and we should turn them off".

This also avoids power resources which we need when bringing devices out
of D3 from getting bounced off and then back on again.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / PMIC: xpower: Fix power_table addresses

2018-03-24T10:00:18+00:00

[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ]

The power table addresses should be contiguous, but there was a hole
where 0x34 was missing. On most devices this is not a problem as
addresses above 0x34 are used for the BUC# convertors which are not
used in the DSDTs I've access to but after the BUC# convertors
there is a field named GPI1 in the DSTDs, which does get used in some
cases and ended up turning BUC6 on and off due to the wrong addresses,
resulting in turning the entire device off (or causing it to reboot).

Removing the hole in the addresses fixes this, fixing one of my
Bay Trail tablets turning off while booting the mainline kernel.

While at it add comments with the field names used in the DSDTs to
make it easier to compare the register and bits used at each address
with the datasheet.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI/processor: Replace racy task affinity logic

2018-03-24T10:00:09+00:00

[ Upstream commit 8153f9ac43897f9f4786b30badc134fcc1a4fb11 ]

acpi_processor_get_throttling() requires to invoke the getter function on
the target CPU. This is achieved by temporarily setting the affinity of the
calling user space thread to the requested CPU and reset it to the original
affinity afterwards.

That's racy vs. CPU hotplug and concurrent affinity settings for that
thread resulting in code executing on the wrong CPU and overwriting the
new affinity setting.

acpi_processor_get_throttling() is invoked in two ways:

1) The CPU online callback, which is already running on the target CPU and
   obviously protected against hotplug and not affected by affinity
   settings.

2) The ACPI driver probe function, which is not protected against hotplug
   during modprobe.

Switch it over to work_on_cpu() and protect the probe function against CPU
hotplug.

Signed-off-by: Thomas Gleixner 
Cc: Fenghua Yu 
Cc: Tony Luck 
Cc: Herbert Xu 
Cc: "Rafael J. Wysocki" 
Cc: Peter Zijlstra 
Cc: Benjamin Herrenschmidt 
Cc: Sebastian Siewior 
Cc: Lai Jiangshan 
Cc: linux-acpi@vger.kernel.org
Cc: Viresh Kumar 
Cc: Michael Ellerman 
Cc: Tejun Heo 
Cc: "David S. Miller" 
Cc: Len Brown 
Link: http://lkml.kernel.org/r/20170412201042.785920903@linutronix.de
Signed-off-by: Thomas Gleixner 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman