linux-stable.git/drivers/acpi, branch v4.5.2 Linux kernel stable tree ACPI / PM: Runtime resume devices when waking from hibernate 2016-04-12T14:33:47+00:00 Lukas Wunner lukas@wunner.de 2016-03-22T23:11:20+00:00 2444c61a380e6cf549b22eddd209affcd2a39d9e commit fbda4b38fa3995aa0777fe9cbbdcb223c6292083 upstream. Commit 58a1fbbb2ee8 ("PM / PCI / ACPI: Kick devices that might have been reset by firmware") added a runtime resume for devices that were runtime suspended when the system entered suspend-to-RAM. Briefly, the motivation was to ensure that devices did not remain in a reset-power-on state after resume, potentially preventing deep SoC-wide low-power states from being entered on idle. Currently we're not doing the same when leaving suspend-to-disk and this asymmetry is a problem if drivers rely on the automatic resume triggered by pm_complete_with_resume_check(). Fix it. Fixes: 58a1fbbb2ee8 (PM / PCI / ACPI: Kick devices that might have been reset by firmware) Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fbda4b38fa3995aa0777fe9cbbdcb223c6292083 upstream.

Commit 58a1fbbb2ee8 ("PM / PCI / ACPI: Kick devices that might have been
reset by firmware") added a runtime resume for devices that were runtime
suspended when the system entered suspend-to-RAM.

Briefly, the motivation was to ensure that devices did not remain in a
reset-power-on state after resume, potentially preventing deep SoC-wide
low-power states from being entered on idle.

Currently we're not doing the same when leaving suspend-to-disk and this
asymmetry is a problem if drivers rely on the automatic resume triggered
by pm_complete_with_resume_check(). Fix it.

Fixes: 58a1fbbb2ee8 (PM / PCI / ACPI: Kick devices that might have been reset by firmware)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: ACPI: IA64: fix IO port generic range check 2016-04-12T14:33:16+00:00 Lorenzo Pieralisi lorenzo.pieralisi@arm.com 2016-03-21T11:12:55+00:00 71adf9dac3411109e243c302c604572e65d0dede commit 4a2e7aab4ffce1e0e79b303dc2f9a03aa9f3a332 upstream. The [0 - 64k] ACPI PCI IO port resource boundary check in: acpi_dev_ioresource_flags() is currently applied blindly in the ACPI resource parsing to all architectures, but only x86 suffers from that IO space limitation. On arches (ie IA64 and ARM64) where IO space is memory mapped, the PCI root bridges IO resource windows are firstly initialized from the _CRS (in acpi_decode_space()) and contain the CPU physical address at which a root bridge decodes IO space in the CPU physical address space with the offset value representing the offset required to translate the PCI bus address into the CPU physical address. The IO resource windows are then parsed and updated in arch code before creating and enumerating PCI buses (eg IA64 add_io_space()) to map in an arch specific way the obtained CPU physical address range to a slice of virtual address space reserved to map PCI IO space, ending up with PCI bridges resource windows containing IO resources like the following on a working IA64 configuration: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x1000000-0x100ffff window] (bus address [0x0000-0xffff]) pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window] pci_bus 0000:00: root bus resource [bus 00] This implies that the [0 - 64K] check in acpi_dev_ioresource_flags() leaves platforms with memory mapped IO space (ie IA64) broken (ie kernel can't claim IO resources since the host bridge IO resource is disabled and discarded by ACPI core code, see log on IA64 with missing root bridge IO resource, silently filtered by current [0 - 64k] check in acpi_dev_ioresource_flags()): PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window] pci_bus 0000:00: root bus resource [bus 00] [...] pci 0000:00:03.0: [1002:515e] type 00 class 0x030000 pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref] pci 0000:00:03.0: reg 0x14: [io 0x1000-0x10ff] pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff] pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref] pci 0000:00:03.0: supports D1 D2 pci 0000:00:03.0: can't claim BAR 1 [io 0x1000-0x10ff]: no compatible bridge window For this reason, the IO port resources boundaries check in generic ACPI parsing code should be guarded with a CONFIG_X86 guard so that more arches (ie ARM64) can benefit from the generic ACPI resources parsing interface without incurring in unexpected resource filtering, fixing at the same time current breakage on IA64. This patch factors out IO ports boundary [0 - 64k] check in generic ACPI code and makes the IO space check X86 specific to make sure that IO space resources are usable on other arches too. Fixes: 3772aea7d6f3 (ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge) Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4a2e7aab4ffce1e0e79b303dc2f9a03aa9f3a332 upstream.

The [0 - 64k] ACPI PCI IO port resource boundary check in:

acpi_dev_ioresource_flags()

is currently applied blindly in the ACPI resource parsing to all
architectures, but only x86 suffers from that IO space limitation.

On arches (ie IA64 and ARM64) where IO space is memory mapped,
the PCI root bridges IO resource windows are firstly initialized from
the _CRS (in acpi_decode_space()) and contain the CPU physical address
at which a root bridge decodes IO space in the CPU physical address
space with the offset value representing the offset required to translate
the PCI bus address into the CPU physical address.

The IO resource windows are then parsed and updated in arch code
before creating and enumerating PCI buses (eg IA64 add_io_space())
to map in an arch specific way the obtained CPU physical address range
to a slice of virtual address space reserved to map PCI IO space,
ending up with PCI bridges resource windows containing IO
resources like the following on a working IA64 configuration:

PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x1000000-0x100ffff window] (bus
address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
pci_bus 0000:00: root bus resource [bus 00]

This implies that the [0 - 64K] check in acpi_dev_ioresource_flags()
leaves platforms with memory mapped IO space (ie IA64) broken (ie kernel
can't claim IO resources since the host bridge IO resource is disabled
and discarded by ACPI core code, see log on IA64 with missing root bridge
IO resource, silently filtered by current [0 - 64k] check in
acpi_dev_ioresource_flags()):

PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
pci_bus 0000:00: root bus resource [bus 00]

[...]

pci 0000:00:03.0: [1002:515e] type 00 class 0x030000
pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref]
pci 0000:00:03.0: reg 0x14: [io  0x1000-0x10ff]
pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff]
pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: can't claim BAR 1 [io  0x1000-0x10ff]: no compatible
bridge window

For this reason, the IO port resources boundaries check in generic ACPI
parsing code should be guarded with a CONFIG_X86 guard so that more arches
(ie ARM64) can benefit from the generic ACPI resources parsing interface
without incurring in unexpected resource filtering, fixing at the same
time current breakage on IA64.

This patch factors out IO ports boundary [0 - 64k] check in generic ACPI
code and makes the IO space check X86 specific to make sure that IO
space resources are usable on other arches too.

Fixes: 3772aea7d6f3 (ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge)
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPICA: Revert "Parser: Fix for SuperName method invocation" 2016-03-08T21:58:38+00:00 Bob Moore robert.moore@intel.com 2016-02-19T06:17:36+00:00 0dda8851a88d6c9d6389f1caf69627154c39aceb ACPICA commit eade8f78f2aa21e8eabc3380a5728db47273bcf1 Revert commit ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method invocation). Support for method invocations as part of super_name will be removed from the ACPI specification, since no AML interpreter supports it. Fixes: ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method invocation) Link: https://github.com/acpica/acpica/commit/eade8f78 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
ACPICA commit eade8f78f2aa21e8eabc3380a5728db47273bcf1

Revert commit ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method
invocation).

Support for method invocations as part of super_name will be
removed from the ACPI specification, since no AML interpreter
supports it.

Fixes: ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method invocation)
Link: https://github.com/acpica/acpica/commit/eade8f78
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
nfit: Continue init even if ARS commands are unimplemented 2016-03-05T00:46:13+00:00 Vishal Verma vishal.l.verma@intel.com 2016-03-03T22:39:41+00:00 6e2452dff4441e3dc24d415c8b2cda8a3ba52116 If firmware doesn't implement any of the ARS commands, take that to mean that ARS is unsupported, and continue to initialize regions without bad block lists. We cannot make the assumption that ARS commands will be unconditionally supported on all NVDIMMs. Reported-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Tested-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
If firmware doesn't implement any of the ARS commands, take that to
mean that ARS is unsupported, and continue to initialize regions without
bad block lists. We cannot make the assumption that ARS commands will be
unconditionally supported on all NVDIMMs.

Reported-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Tested-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge tag 'pci-v4.5-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2016-02-27T20:33:42+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-02-27T20:33:42+00:00 a9f8094aaedc7bc21e9232ea5120eaf2e0c824fd Pull PCI fixes from Bjorn Helgaas: "Enumeration: Revert x86 pcibios_alloc_irq() to fix regression (Bjorn Helgaas) Marvell MVEBU host bridge driver: Restrict build to 32-bit ARM (Thierry Reding)" * tag 'pci-v4.5-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Restrict build to 32-bit ARM Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()" Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed" Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled" 
Pull PCI fixes from Bjorn Helgaas:
 "Enumeration:
    Revert x86 pcibios_alloc_irq() to fix regression (Bjorn Helgaas)

  Marvell MVEBU host bridge driver:
    Restrict build to 32-bit ARM (Thierry Reding)"

* tag 'pci-v4.5-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Restrict build to 32-bit ARM
  Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"
  Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"
  Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"
Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()" 2016-02-27T14:52:20+00:00 Bjorn Helgaas bhelgaas@google.com 2016-02-17T18:26:42+00:00 6c777e8799a93e3bdb67bec622429e1b48dc90fb 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug. Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not v4.3 and bisected it to 991de2e59090. Sunjin reported that the RocketRAID 272x driver worked in v4.2 but not v4.3. In both cases booting with "pci=routirq" is a workaround. I think the problem is that after 991de2e59090, we no longer call pcibios_enable_irq() for upstream bridges. Prior to 991de2e59090, when a driver called pci_enable_device(), we recursively called pcibios_enable_irq() for upstream bridges via pci_enable_bridge(). After 991de2e59090, we call pcibios_enable_irq() from pci_device_probe() instead of the pci_enable_device() path, which does *not* call pcibios_enable_irq() for upstream bridges. Revert 991de2e59090 to fix these driver regressions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru> Reported-by: Sunjin Yang <fan4326@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com> 
991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug.

Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not
v4.3 and bisected it to 991de2e59090.  Sunjin reported that the RocketRAID
272x driver worked in v4.2 but not v4.3.  In both cases booting with
"pci=routirq" is a workaround.

I think the problem is that after 991de2e59090, we no longer call
pcibios_enable_irq() for upstream bridges.  Prior to 991de2e59090, when a
driver called pci_enable_device(), we recursively called
pcibios_enable_irq() for upstream bridges via pci_enable_bridge().

After 991de2e59090, we call pcibios_enable_irq() from pci_device_probe()
instead of the pci_enable_device() path, which does *not* call
pcibios_enable_irq() for upstream bridges.

Revert 991de2e59090 to fix these driver regressions.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru>
Reported-by: Sunjin Yang <fan4326@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
CC: Jiang Liu <jiang.liu@linux.intel.com>
 Merge tag 'pm+acpi-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2016-02-26T17:21:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-02-26T17:21:48+00:00 bb134ff50709fda187027c2263036ccb41024ca5 Pull power management and ACPI fixes from Rafael Wysocki: "These are two reverts of recent PCI-related ACPI core changes (one of which caused some systems to crash on boot and the other was a cleanup on top of it) and a devfreq fix for Tegra. Specifics: - Revert an ACPI core change related to IRQ management in PCI that introduced code relying on the use of kmalloc() which turned out to also run during early init when that's not available yet and caused some systems to crash on boot for this reason along with a cleanup on top of it (Rafael Wysocki). - Prevent devfreq from flooding the kernel log with useless messages on Tegra (which started to happen after some recent changes in the devfreq core) by fixing the driver to follow the documentation and the core's expectations in its ->target callback (Tomeu Vizoso)" * tag 'pm+acpi-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI, PCI, irq: remove interrupt count restriction" Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()" PM / devfreq: tegra: Set freq in rate callback 
Pull power management and ACPI fixes from Rafael Wysocki:
 "These are two reverts of recent PCI-related ACPI core changes (one of
  which caused some systems to crash on boot and the other was a cleanup
  on top of it) and a devfreq fix for Tegra.

  Specifics:

   - Revert an ACPI core change related to IRQ management in PCI that
     introduced code relying on the use of kmalloc() which turned out to
     also run during early init when that's not available yet and caused
     some systems to crash on boot for this reason along with a cleanup
     on top of it (Rafael Wysocki).

   - Prevent devfreq from flooding the kernel log with useless messages
     on Tegra (which started to happen after some recent changes in the
     devfreq core) by fixing the driver to follow the documentation and
     the core's expectations in its ->target callback (Tomeu Vizoso)"

* tag 'pm+acpi-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI, PCI, irq: remove interrupt count restriction"
  Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
  PM / devfreq: tegra: Set freq in rate callback
Revert "ACPI, PCI, irq: remove interrupt count restriction" 2016-02-24T12:55:38+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2016-02-24T12:55:38+00:00 e249714571db26cdb1ae8df7ed39971bafa041a7 Revert commit b5bd02695471 (ACPI, PCI, irq: remove interrupt count restriction) that introduced a boot regression on some systems where it caused kmalloc() to be used too early. Link: http://marc.info/?l=linux-acpi&m=145580159209240&w=2 Reported-by: Nalla, Ravikanth <ravikanth.nalla@hpe.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Revert commit b5bd02695471 (ACPI, PCI, irq: remove interrupt count
restriction) that introduced a boot regression on some systems
where it caused kmalloc() to be used too early.

Link: http://marc.info/?l=linux-acpi&m=145580159209240&w=2
Reported-by: Nalla, Ravikanth <ravikanth.nalla@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()" 2016-02-24T12:53:46+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2016-02-24T12:53:46+00:00 5ec5d10682745d3280a37e8ffee1ddcd37ecfa94 Revert commit 0971686954f9 "ACPI / PCI: Simplify acpi_penalize_isa_irq()" that depends on commit b5bd02695471 (ACPI, PCI, irq: remove interrupt count restriction) which introduced a regression and needs to be reverted for this reason. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Revert commit 0971686954f9 "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
that depends on commit b5bd02695471 (ACPI, PCI, irq: remove interrupt
count restriction) which introduced a regression and needs to be
reverted for this reason.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
nfit: update address range scrub commands to the acpi 6.1 format 2016-02-24T01:17:20+00:00 Dan Williams dan.j.williams@intel.com 2016-02-17T21:08:58+00:00 4577b0665515e0abc7bc72562d6328d179598815 The original format of these commands from the "NVDIMM DSM Interface Example" [1] are superseded by the ACPI 6.1 definition of the "NVDIMM Root Device _DSMs" [2]. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf [2]: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf "9.20.7 NVDIMM Root Device _DSMs" Changes include: 1/ New 'restart' fields in ars_status, unfortunately these are implemented in the middle of the existing definition so this change is not backwards compatible. The expectation is that shipping platforms will only ever support the ACPI 6.1 definition. 2/ New status values for ars_start ('busy') and ars_status ('overflow'). Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
The original format of these commands from the "NVDIMM DSM Interface
Example" [1] are superseded by the ACPI 6.1 definition of the "NVDIMM Root
Device _DSMs" [2].

[1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
[2]: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
     "9.20.7 NVDIMM Root Device _DSMs"

Changes include:
1/ New 'restart' fields in ars_status, unfortunately these are
   implemented in the middle of the existing definition so this change
   is not backwards compatible.  The expectation is that shipping
   platforms will only ever support the ACPI 6.1 definition.

2/ New status values for ars_start ('busy') and ars_status ('overflow').

Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>