linux-stable.git/drivers/acpi, branch v4.19.4

Revert "ACPICA: AML interpreter: add region addresses in global list during initialization"

2018-11-21T08:19:29+00:00

This reverts commit 22083c028d0b3ee419232d25ce90367e5b25df8f which is
commit 4abb951b73ff0a8a979113ef185651aa3c8da19b upstream.

Jean writes:

	This commit was tagged with:

	    Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011
	    Tested-by: Jean-Marc Lenoir
	    Cc: All applicable 

	making it sound like it was fixing an actual bug. This is not the case.
	The commit fixes a side issue discovered while investigating bug
	#200011. It does NOT fix bug #200011 itself (as explicitly reported by
	Jean-Marc at https://bugzilla.kernel.org/show_bug.cgi?id=200011#c65 ).

	It does however cause regressions, despite what the commit message says. See:

	https://bugzilla.kernel.org/show_bug.cgi?id=201721

	and I expect more similar regressions, as ACPI resource conflicts are
	very frequent.

	This commit was not stable material to start with. It is intrusive,
	presents a risk of side effects, and does not solve an actual bug that
	is bothering users.

Reported-by: Jean Delvare 
Cc: Jean-Marc Lenoir 
Cc: Erik Schmauss 
Cc: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

acpi, nfit: Fix ARS overflow continuation

2018-11-21T08:19:17+00:00

commit 3fa58dcab50a0aa16817f16a8d38aee869eb3fb9 upstream.

When the platform BIOS is unable to report all the media error records
it requires the OS to restart the scrub at a prescribed location. The
driver detects the overflow condition, but then fails to report it to
the ARS state machine after reaping the records. Propagate -ENOSPC
correctly to continue the ARS operation.

Cc: 
Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue")
Reported-by: Jacek Zloch 
Reviewed-by: Dave Jiang 
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

acpi/nfit, x86/mce: Validate a MCE's address before using it

2018-11-21T08:19:17+00:00

commit e8a308e5f47e545e0d41d0686c00f5f5217c5f61 upstream.

The NFIT machine check handler uses the physical address from the mce
structure, and compares it against information in the ACPI NFIT table
to determine whether that location lies on an NVDIMM. The mce->addr
field however may not always be valid, and this is indicated by the
MCI_STATUS_ADDRV bit in the status field.

Export mce_usable_address() which already performs validation for the
address, and use it in the NFIT handler.

Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Robert Elliott 
Signed-off-by: Vishal Verma 
Signed-off-by: Borislav Petkov 
CC: Arnd Bergmann 
Cc: Dan Williams 
CC: Dave Jiang 
CC: elliott@hpe.com
CC: "H. Peter Anvin" 
CC: Ingo Molnar 
CC: Len Brown 
CC: linux-acpi@vger.kernel.org
CC: linux-edac 
CC: linux-nvdimm@lists.01.org
CC: Qiuxu Zhuo 
CC: "Rafael J. Wysocki" 
CC: Ross Zwisler 
CC: stable 
CC: Thomas Gleixner 
CC: Tony Luck 
CC: x86-ml 
CC: Yazen Ghannam 
Link: http://lkml.kernel.org/r/20181026003729.8420-2-vishal.l.verma@intel.com
Signed-off-by: Greg Kroah-Hartman

acpi/nfit, x86/mce: Handle only uncorrectable machine checks

2018-11-21T08:19:17+00:00

commit 5d96c9342c23ee1d084802dcf064caa67ecaa45b upstream.

The MCE handler for nfit devices is called for memory errors on a
Non-Volatile DIMM and adds the error location to a 'badblocks' list.
This list is used by the various NVDIMM drivers to avoid consuming known
poison locations during IO.

The MCE handler gets called for both corrected and uncorrectable errors.
Until now, both kinds of errors have been added to the badblocks list.
However, corrected memory errors indicate that the problem has already
been fixed by hardware, and the resulting interrupt is merely a
notification to Linux.

As far as future accesses to that location are concerned, it is
perfectly fine to use, and thus doesn't need to be included in the above
badblocks list.

Add a check in the nfit MCE handler to filter out corrected mce events,
and only process uncorrectable errors.

Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Omar Avelar 
Signed-off-by: Vishal Verma 
Signed-off-by: Borislav Petkov 
CC: Arnd Bergmann 
CC: Dan Williams 
CC: Dave Jiang 
CC: elliott@hpe.com
CC: "H. Peter Anvin" 
CC: Ingo Molnar 
CC: Len Brown 
CC: linux-acpi@vger.kernel.org
CC: linux-edac 
CC: linux-nvdimm@lists.01.org
CC: Qiuxu Zhuo 
CC: "Rafael J. Wysocki" 
CC: Ross Zwisler 
CC: stable 
CC: Thomas Gleixner 
CC: Tony Luck 
CC: x86-ml 
CC: Yazen Ghannam 
Link: http://lkml.kernel.org/r/20181026003729.8420-1-vishal.l.verma@intel.com
Signed-off-by: Greg Kroah-Hartman

ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers

2018-11-13T19:08:28+00:00

[ Upstream commit 240714061c58e6b1abfb3322398a7634151c06cb ]

Bay and Cherry Trail DSTDs represent a different set of devices depending
on which OS the device think it is booting. One set of decices for Windows
and another set of devices for Android which targets the Android-x86 Linux
kernel fork (which e.g. used to have its own display driver instead of
using the i915 driver).

Which set of devices we are actually going to get is out of our control,
this is controlled by the ACPI OSID variable, which gets either set through
an EFI setup option, or sometimes is autodetected. So we need to support
both.

This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we
get for the first resp. second DMA controller on Cherry Trail devices when
OSID is set to Android.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / processor: Fix the return value of acpi_processor_ids_walk()

2018-11-13T19:08:24+00:00

[ Upstream commit d0381bf4f80c571dde1244fe5b85dc35e8b3f546 ]

ACPI driver should make sure all the processor IDs in their ACPI Namespace
are unique. the driver performs a depth-first walk of the namespace tree
and calls the acpi_processor_ids_walk() to check the duplicate IDs.

But, the acpi_processor_ids_walk() mistakes the return value. If a
processor is checked, it returns true which causes the walk break
immediately, and other processors will never be checked.

Repace the value with AE_OK which is the standard acpi_status value.
And don't abort the namespace walk even on error.

Fixes: 8c8cb30f49b8 (acpi/processor: Implement DEVICE operator for processor enumeration)
Signed-off-by: Dou Liyang 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / PM: LPIT: Register sysfs attributes based on FADT

2018-11-13T19:08:24+00:00

[ Upstream commit 1cdda9486f5103fb133f88e662e48c504adbb779 ]

ACPI Low Power S0 Idle capabilities are announced via FADT table and can
be used to inform the kernel about the presence of one or more Low Power
Idle (LPI) entries as descried in LPIT table. LPIT table can exist
independently even if the FADT S0 Idle flag is not set and thus it could
confuse user since the following cpuidle attributes are created.

/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us
/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us

Presence or absence of above attributes could mean that the given
platform supports S0ix state or not.

This change allows to create the above cpuidle attributes only if
FADT table supports Low Power S0 Idle.

Signed-off-by: Rajneesh Bhardwaj 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI/PPTT: Handle architecturally unknown cache types

2018-11-13T19:08:24+00:00

[ Upstream commit 59bbff3775c0951300f7b41345a54b999438f8d0 ]

The type of a cache might not be specified by architectural mechanisms (ie
system registers), but its type might be specified in the PPTT.  In this
case, we should populate the type of the cache, rather than leave it
undefined.

This fixes the issue where the cacheinfo driver will not populate sysfs
for such caches, resulting in the information missing from utilities like
lstopo and lscpu, thus degrading the user experience.

Fixes: 2bd00bcd73e5 (ACPI/PPTT: Add Processor Properties Topology Table parsing)
Reported-by: Vijaya Kumar K 
Signed-off-by: Jeffrey Hugo 
Reviewed-by: Sudeep Holla 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

acpi, nfit: Fix Address Range Scrub completion tracking

2018-11-13T19:08:17+00:00

commit d3abaf43bab8d5b0a3c6b982100d9e2be96de4ad upstream.

The Address Range Scrub implementation tried to skip running scrubs
against ranges that were already scrubbed by the BIOS. Unfortunately
that support also resulted in early scrub completions as evidenced by
this debug output from nfit_test:

    nd_region region9: ARS: range 1 short complete
    nd_region region3: ARS: range 1 short complete
    nd_region region4: ARS: range 2 ARS start (0)
    nd_region region4: ARS: range 2 short complete

...i.e. completions without any indications that the scrub was started.

This state of affairs was hard to see in the code due to the
proliferation of state bits and mistakenly trying to track done state
per-range when the completion is a global property of the bus.

So, kill the four ARS state bits (ARS_REQ, ARS_REQ_REDO, ARS_DONE, and
ARS_SHORT), and replace them with just 2 request flags ARS_REQ_SHORT and
ARS_REQ_LONG. The implementation will still complete and reap the
results of BIOS initiated ARS, but it will not attempt to use that
information to affect the completion status of scrubbing the ranges from
a Linux perspective.

Instead, try to synchronously run a short ARS per range at init time and
schedule a long scrub in the background. If ARS is busy with an ARS
request, schedule both a short and a long scrub for when ARS returns to
idle. This logic also satisfies the intent of what ARS_REQ_REDO was
trying to achieve. The new rule is that the REQ flag stays set until the
next successful ars_start() for that range.

With the new policy that the REQ flags are not cleared until the next
start, the implementation no longer loses requests as can be seen from
the following log:

    nd_region region3: ARS: range 1 ARS start short (0)
    nd_region region9: ARS: range 1 ARS start short (0)
    nd_region region3: ARS: range 1 complete
    nd_region region4: ARS: range 2 ARS start short (0)
    nd_region region9: ARS: range 1 complete
    nd_region region9: ARS: range 1 ARS start long (0)
    nd_region region4: ARS: range 2 complete
    nd_region region3: ARS: range 1 ARS start long (0)
    nd_region region9: ARS: range 1 complete
    nd_region region3: ARS: range 1 complete
    nd_region region4: ARS: range 2 ARS start long (0)
    nd_region region4: ARS: range 2 complete

...note that the nfit_test emulated driver provides 2 buses, that is why
some of the range indices are duplicated. Notice that each range
now successfully completes a short and long scrub.

Cc: 
Fixes: 14c73f997a5e ("nfit, address-range-scrub: introduce nfit_spa->ars_state")
Fixes: cc3d3458d46f ("acpi/nfit: queue issuing of ars when an uc error...")
Reported-by: Jacek Zloch 
Reported-by: Krzysztof Rusocki 
Reviewed-by: Dave Jiang 
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

ACPICA: AML Parser: fix parse loop to correctly skip erroneous extended opcodes

2018-11-13T19:08:17+00:00

commit c64baa3a6fa207d112706bc5e7fd645cd8a8663f upstream.

AML opcodes come in two lengths: 1-byte opcodes and 2-byte, extended opcodes.
If an error occurs due to illegal opcodes during table load, the AML parser
needs to continue loading the table. In order to do this, it needs to skip
parsing of the offending opcode and operands associated with that opcode.

This change fixes the AML parse loop to correctly skip parsing of incorrect
extended opcodes. Previously, only the short opcodes were skipped correctly.

Signed-off-by: Erik Schmauss 
Cc: All applicable 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman