linux-stable.git/drivers/acpi, branch v4.14.78

ACPI / scan: Initialize status to ACPI_STA_DEFAULT

2018-09-15T07:45:30+00:00

[ Upstream commit 5971b0c1594d6c34e257101ed5fdffec65205c50 ]

Since commit 63347db0affa "ACPI / scan: Use acpi_bus_get_status() to
initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices
gets set to 0 by acpi_bus_type_and_status() and filled with its actual
value later when acpi_add_single_object() calls acpi_bus_get_status().

This means that any acpi_match_device_ids() calls in between will always
fail with -ENOENT.

We already have a workaround for this, which temporary forces status to
ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present()
and the next commit in this series adds another acpi_match_device_ids()
call between status being initialized as 0 and the acpi_bus_get_status()
call.

Rather then adding another workaround, this commit makes
acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is
safe to do as the only code looking at status between the initialization
and the acpi_bus_get_status() call is those acpi_match_device_ids() calls.

Note this does mean that we need to (re)set status to 0 in case the
acpi_bus_get_status() call fails.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems

2018-08-24T11:09:20+00:00

[ Upstream commit 2c4d6baf1bc4f7729773ffcee9ba2a9781578633 ]

The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems
beyond matched only a single DMI model (20KGS3JF01), that didn't cover
my laptop (20KH002JUS). Change to match based on DMI product family to
cover all X1 6th gen systems.

Signed-off-by: Robin H. Johnson 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

nfit: fix unchecked dereference in acpi_nfit_ctl

2018-08-24T11:09:16+00:00

[ Upstream commit ee6581ceba7f8314b81b2f2a81f1cf3f67c679e2 ]

Incremental patch to fix the unchecked dereference in acpi_nfit_ctl.
Reported by Dan Carpenter:

"acpi/nfit: fix cmd_rc for acpi_nfit_ctl to
always return a value" from Jun 28, 2018, leads to the following
Smatch complaint:

    drivers/acpi/nfit/core.c:578 acpi_nfit_ctl()
     warn: variable dereferenced before check 'cmd_rc' (see line 411)

drivers/acpi/nfit/core.c
   410
   411		*cmd_rc = -EINVAL;
                ^^^^^^^^^^^^^^^^^^
Patch adds unchecked dereference.

Fixes: c1985cefd844 ("acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value")

Signed-off-by: Dave Jiang 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value

2018-08-24T11:09:10+00:00

[ Upstream commit c1985cefd844e26bd19673a6df8d8f0b1918c2db ]

cmd_rc is passed in by reference to the acpi_nfit_ctl() function and the
caller expects a value returned. However, when the package is pass through
via the ND_CMD_CALL command, cmd_rc is not touched. Make sure cmd_rc is
always set.

Fixes: aef253382266 ("libnvdimm, nfit: centralize command status translation")

Signed-off-by: Dave Jiang 
Signed-off-by: Dan Williams 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / EC: Use ec_no_wakeup on Thinkpad X1 Carbon 6th

2018-08-24T11:08:57+00:00

[ Upstream commit 8195a655e5ce09550aff81b2573d9b015d520cb9 ]

On this system EC interrupt triggers constantly kicking devices out of
low power states and thus blocking power management. The system also has
a PCIe root port hosting Alpine Ridge Thunderbolt controller and it
never gets a chance to go to D3cold because of this.

Since the power button works the same regardless if EC interrupt is
enabled or not during s2idle, add a quirk for this machine that sets
ec_no_wakeup=true preventing spurious wakeups.

Signed-off-by: Mika Westerberg 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ACPI / PM: save NVS memory for ASUS 1025C laptop

2018-08-22T05:46:10+00:00

commit 231f9415001138a000cd0f881c46654b7ea3f8c5 upstream.

Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an
issue by which the fan would run at full speed upon resume. Bisecting
it showed me the issue was introduced in 3.17 by commit 821d6f0359b0
(ACPI / sleep: Do not save NVS for new machines to accelerate S3). This
code only affects machines built starting as of 2012, but this Asus
1025C laptop was made in 2012 and apparently needs the NVS data to be
saved, otherwise the CPU's thermal state is not properly reported on
resume and the fan runs at full speed upon resume.

Here's a very simple way to check if such a machine is affected :

  # cat /sys/class/thermal/thermal_zone0/temp
  55000

  ( now suspend, wait one second and resume )

  # cat /sys/class/thermal/thermal_zone0/temp
  0

  (and after ~15 seconds the fan starts to spin)

Let's apply the same quirk as commit cbc00c13 (ACPI: save NVS memory
for Lenovo G50-45) and reuse the function it provides. Note that this
commit was already backported to 4.9.x but not 4.4.x.

Cc: 3.17+  # 3.17+: requires cbc00c13
Signed-off-by: Willy Tarreau 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Remove ghes_ioremap_area

2018-08-17T19:01:10+00:00

commit 520e18a5080d2c444a03280d99c8a35cb667d321 upstream.

Now that nothing is using the ghes_ioremap_area pages, rip them out.

Signed-off-by: James Morse 
Reviewed-by: Borislav Petkov 
Tested-by: Tyler Baicar 
Signed-off-by: Rafael J. Wysocki 
Cc: All applicable 
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

ACPI / LPSS: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2

2018-08-03T05:50:35+00:00

[ Upstream commit c975e472ec12392a0c34de1350e634310f8a1dea ]

The Point of View mobii wintab p800w Bay Trail tablet comes with a Crystal
Cove PMIC, yet uses the LPSS PWM for backlight control, rather then the
Crystal Cove's PWM, so we need to call pwm_add_table() to add a
pwm_backlight mapping for the LPSS pwm despite there being an INT33FD
ACPI device present.

On all Bay Trail devices the _HRV object of the INT33FD ACPI device
will normally return 2, to indicate the Bay Trail variant of the CRC
PMIC is present, except on this tablet where _HRV is 0xffff. I guess this
is a hack to make the windows Crystal Cove PWM driver not bind.

Out of the 44 DSTDs with an INT33FD device in there which I have (from
different model devices) only the pov mobii wintab p800w uses 0xffff for
the HRV.

The byt_pwm_setup code calls acpi_dev_present to check for the presence
of a INT33FD ACPI device which indicates that a CRC PMIC is present and
if the INT33FD ACPI device is present then byt_pwm_setup will not add
a pwm_backlight mapping for the LPSS pwm, so that the CRC PWM will get
used instead.

acpi_dev_present has a hrv parameter, this commit make us pass 2 instead
of -1, so that things still match on normal tablets, but on this special
case with its _HRV of 0xffff, the check will now fail so that the
pwm_backlight mapping for the LPSS pwm gets added fixing backlight
brightness control on this device.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PCI: pciehp: Request control of native hotplug only if supported

2018-08-03T05:50:31+00:00

[ Upstream commit 408fec36a1ab3d14273c2116b449ef1e9be3cb8b ]

Currently we request control of native PCIe hotplug unconditionally.
Native PCIe hotplug events are handled by the pciehp driver, and if it is
not enabled those events will be lost.

Request control of native PCIe hotplug only if the pciehp driver is
enabled, so we will actually handle native PCIe hotplug events.

Suggested-by: Bjorn Helgaas 
Signed-off-by: Mika Westerberg 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

acpi: Add helper for deactivating memory region

2018-07-08T13:30:46+00:00

commit d2d2e3c46be5d6dd8001d0eebdf7cafb9bc7006b upstream.

Sometimes memory resource may be overlapping with
SystemMemory Operation Region by design, for example if the
memory region is used as a mailbox for communication with a
firmware in the system. One occasion of such mailboxes is
USB Type-C Connector System Software Interface (UCSI).

With regions like that, it is important that the driver is
able to map the memory with the requirements it has. For
example, the driver should be allowed to map the memory as
non-cached memory. However, if the operation region has been
accessed before the driver has mapped the memory, the memory
has been marked as write-back by the time the driver is
loaded. That means the driver will fail to map the memory
if it expects non-cached memory.

To work around the problem, introducing helper that the
drivers can use to temporarily deactivate (unmap)
SystemMemory Operation Regions that overlap with their
IO memory.

Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Rafael J. Wysocki 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman