linux-stable.git/drivers/acpi, branch v4.14.166

ACPI: PM: Avoid attaching ACPI PM domain to certain devices

2019-12-17T19:39:37+00:00

commit b9ea0bae260f6aae546db224daa6ac1bd9d94b91 upstream.

Certain ACPI-enumerated devices represented as platform devices in
Linux, like fans, require special low-level power management handling
implemented by their drivers that is not in agreement with the ACPI
PM domain behavior.  That leads to problems with managing ACPI fans
during system-wide suspend and resume.

For this reason, make acpi_dev_pm_attach() skip the affected devices
by adding a list of device IDs to avoid to it and putting the IDs of
the affected devices into that list.

Fixes: e5cc8ef31267 (ACPI / PM: Provide ACPI PM callback routines for subsystems)
Reported-by: Zhang Rui 
Tested-by: Todd Brandt 
Cc: 3.10+  # 3.10+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()

2019-12-17T19:39:36+00:00

commit 627ead724eff33673597216f5020b72118827de4 upstream.

kmemleak reported backtrace:
    [] kmem_cache_alloc_trace+0x128/0x260
    [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0
    [<1180f4fc>] i2c_register_adapter+0x186/0x400
    [<6083baf7>] i2c_add_adapter+0x4e/0x70
    [] intel_gmbus_setup+0x1a2/0x2c0 [i915]
    [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915]
    [<81911d4b>] i915_pci_probe+0x48/0x160 [i915]
    [<4b159af1>] pci_device_probe+0xdc/0x160
    [] really_probe+0x1ee/0x450
    [] driver_probe_device+0x142/0x1b0
    [] device_driver_attach+0x49/0x50
    [] __driver_attach+0xc9/0x150
    [] bus_for_each_dev+0x56/0xa0
    [<80089bba>] driver_attach+0x19/0x20
    [] bus_add_driver+0x177/0x220
    [<7b29d8c7>] driver_register+0x56/0xf0

In i2c_acpi_remove_space_handler(), a leak occurs whenever the
"data" parameter is initialized to 0 before being passed to
acpi_bus_get_private_data().

This is because the NULL pointer check in acpi_bus_get_private_data()
(condition->if(!*data)) returns EINVAL and, in consequence, memory is
never freed in i2c_acpi_remove_space_handler().

Fix the NULL pointer check in acpi_bus_get_private_data() to follow
the analogous check in acpi_get_data_full().

Signed-off-by: Vamshi K Sthambamkadi 
[ rjw: Subject & changelog ]
Cc: All applicable 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI: OSL: only free map once in osl.c

2019-12-17T19:39:36+00:00

commit 833a426cc471b6088011b3d67f1dc4e147614647 upstream.

acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock
before freeing the map. This creates a race condition the can result
in the map being freed more than once.
A panic can be caused by running

for ((i=0; i<10; i++))
do
        for ((j=0; j<100000; j++))
        do
                cat /sys/firmware/acpi/tables/data/BERT >/dev/null
        done &
done

This patch makes sure that only the process that drops the reference
to 0 does the freeing.

Fixes: b7c1fadd6c2e ("ACPI: Do not use krefs under a mutex in osl.c")
Signed-off-by: Francesco Ruggeri 
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: All applicable 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Switch estatus pool to use vmalloc memory

2019-12-05T14:38:03+00:00

[ Upstream commit 0ac234be1a9497498e57d958f4251f5257b116b4 ]

The ghes code is careful to parse and round firmware's advertised
memory requirements for CPER records, up to a maximum of 64K.
However when ghes_estatus_pool_expand() does its work, it splits
the requested size into PAGE_SIZE granules.

This means if firmware generates 5K of CPER records, and correctly
describes this in the table, __process_error() will silently fail as it
is unable to allocate more than PAGE_SIZE.

Switch the estatus pool to vmalloc() memory. On x86 vmalloc() memory
may fault and be fixed up by vmalloc_fault(). To prevent this call
vmalloc_sync_all() before an NMI handler could discover the memory.

Signed-off-by: James Morse 
Reviewed-by: Borislav Petkov 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI / APEI: Don't wait to serialise with oops messages when panic()ing

2019-12-05T14:38:02+00:00

[ Upstream commit 78b0b690f6558ed788dccafa45965325dd11ba89 ]

oops_begin() exists to group printk() messages with the oops message
printed by die(). To reach this caller we know that platform firmware
took this error first, then notified the OS via NMI with a 'panic'
severity.

Don't wait for another CPU to release the die-lock before panic()ing,
our only goal is to print this fatal error and panic().

This code is always called in_nmi(), and since commit 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), it has been
safe to call printk() from this context. Messages are batched in a
per-cpu buffer and printed via irq-work, or a call back from panic().

Link: https://patchwork.kernel.org/patch/10313555/
Acked-by: Borislav Petkov 
Signed-off-by: James Morse 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI / LPSS: Ignore acpi_device_fix_up_power() return value

2019-12-05T14:37:15+00:00

[ Upstream commit 1a2fa02f7489dc4d746f2a15fb77b3ce1affade8 ]

Ignore acpi_device_fix_up_power() return value. If we return an error
we end up with acpi_default_enumeration() still creating a platform-
device for the device and we end up with the device still being used
but without the special LPSS related handling which is not useful.

Specicifically ignoring the error fixes the touchscreen no longer
working after a suspend/resume on a Prowise PT301 tablet.

This tablet has a broken _PS0 method on the touchscreen's I2C controller,
causing acpi_device_fix_up_power() to fail, causing fallback to standard
platform-dev handling and specifically causing acpi_lpss_save/restore_ctx
to not run.

The I2C controllers _PS0 method does actually turn on the device, but then
does some more nonsense which fails when run during early boot trying to
use I2C opregion handling on another not-yet registered I2C controller.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

mm/memory_hotplug: make add_memory() take the device_hotplug_lock

2019-12-01T08:13:57+00:00

[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]

add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.

In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g.  from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock").  add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.

Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.

The lock is not held yet in
	drivers/xen/balloon.c
	arch/powerpc/platforms/powernv/memtrace.c
	drivers/s390/char/sclp_cmd.c
	drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.

Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module.  If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).

Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand 
Reviewed-by: Pavel Tatashin 
Reviewed-by: Rafael J. Wysocki 
Reviewed-by: Rashmica Gupta 
Reviewed-by: Oscar Salvador 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: "Rafael J. Wysocki" 
Cc: Len Brown 
Cc: Greg Kroah-Hartman 
Cc: Boris Ostrovsky 
Cc: Juergen Gross 
Cc: Nathan Fontenot 
Cc: John Allen 
Cc: Michal Hocko 
Cc: Dan Williams 
Cc: Joonsoo Kim 
Cc: Vlastimil Babka 
Cc: Mathieu Malaterre 
Cc: Pavel Tatashin 
Cc: YASUAKI ISHIMATSU 
Cc: Balbir Singh 
Cc: Haiyang Zhang 
Cc: Heiko Carstens 
Cc: Jonathan Corbet 
Cc: Kate Stewart 
Cc: "K. Y. Srinivasan" 
Cc: Martin Schwidefsky 
Cc: Michael Neuling 
Cc: Philippe Ombredanne 
Cc: Stephen Hemminger 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

ACPI / SBS: Fix rare oops when removing modules

2019-11-24T07:23:19+00:00

[ Upstream commit 757c968c442397f1249bb775a7c8c03842e3e0c7 ]

There was a small race when removing the sbshc module where
smbus_alarm() had queued acpi_smbus_callback() for deferred execution
but it hadn't been run yet, so that when it did run hc had been freed
and the module unloaded, resulting in an invalid paging request.

A similar race existed when removing the sbs module with regards to
acpi_sbs_callback() (which is called from acpi_smbus_callback()).

We therefore need to ensure no callbacks are pending or executing before
the cleanups are done and the modules are removed.

Signed-off-by: Ronald TschalÃ¤r 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPICA: Never run _REG on system_memory and system_IO

2019-11-24T07:23:05+00:00

[ Upstream commit 8b1cafdcb4b75c5027c52f1e82b47ebe727ad7ed ]

These address spaces are defined by the ACPI spec to be
"always available", and thus _REG should never be run on them.
Provides compatibility with other ACPI implementations.

Signed-off-by: Bob Moore 
Signed-off-by: Erik Schmauss 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

PCI/ACPI: Correct error message for ASPM disabling

2019-11-20T17:00:05+00:00

[ Upstream commit 1ad61b612b95980a4d970c52022aa01dfc0f6068 ]

If _OSC execution fails today for platforms without an _OSC entry, code is
printing a misleading message saying disabling ASPM as follows:

  acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

We need to ensure that platform supports ASPM to begin with.

Reported-by: Michael Kelley 
Signed-off-by: Sinan Kaya 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Sasha Levin