linux-stable.git/drivers/acpi, branch v4.14.151

ACPI / PCI: fix acpi_pci_irq_enable() memory leak

2019-10-05T10:48:00+00:00

[ Upstream commit 29b49958cf73b439b17fa29e9a25210809a6c01c ]

In acpi_pci_irq_enable(), 'entry' is allocated by kzalloc() in
acpi_pci_irq_check_entry() (invoked from acpi_pci_irq_lookup()). However,
it is not deallocated if acpi_pci_irq_valid() returns false, leading to a
memory leak. To fix this issue, free 'entry' before returning 0.

Fixes: e237a5518425 ("x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"")
Signed-off-by: Wenwen Wang 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI: custom_method: fix memory leaks

2019-10-05T10:47:59+00:00

[ Upstream commit 03d1571d9513369c17e6848476763ebbd10ec2cb ]

In cm_write(), 'buf' is allocated through kzalloc(). In the following
execution, if an error occurs, 'buf' is not deallocated, leading to memory
leaks. To fix this issue, free 'buf' before returning the error.

Fixes: 526b4af47f44 ("ACPI: Split out custom_method functionality into an own driver")
Signed-off-by: Wenwen Wang 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI / CPPC: do not require the _PSD method

2019-10-05T10:47:57+00:00

[ Upstream commit 4c4cdc4c63853fee48c02e25c8605fb65a6c9924 ]

According to the ACPI 6.3 specification, the _PSD method is optional
when using CPPC.  The underlying assumption is that each CPU can change
frequency independently from all other CPUs; _PSD is provided to tell
the OS that some processors can NOT do that.

However, the acpi_get_psd() function returns ENODEV if there is no _PSD
method present, or an ACPI error status if an error occurs when evaluating
_PSD, if present.  This makes _PSD mandatory when using CPPC, in violation
of the specification, and only on Linux.

This has forced some firmware writers to provide a dummy _PSD, even though
it is irrelevant, but only because Linux requires it; other OSPMs follow
the spec.  We really do not want to have OS specific ACPI tables, though.

So, correct acpi_get_psd() so that it does not return an error if there
is no _PSD method present, but does return a failure when the method can
not be executed properly.  This allows _PSD to be optional as it should
be.

Signed-off-by: Al Stone 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI / processor: don't print errors for processorIDs == 0xff

2019-10-05T10:47:49+00:00

[ Upstream commit 2c2b005f549544c13ef4cfb0e4842949066889bc ]

Some platforms define their processors in this manner:
    Device (SCK0)
    {
	Name (_HID, "ACPI0004" /* Module Device */)  // _HID: Hardware ID
	Name (_UID, "CPUSCK0")  // _UID: Unique ID
	Processor (CP00, 0x00, 0x00000410, 0x06){}
	Processor (CP01, 0x02, 0x00000410, 0x06){}
	Processor (CP02, 0x04, 0x00000410, 0x06){}
	Processor (CP03, 0x06, 0x00000410, 0x06){}
	Processor (CP04, 0x01, 0x00000410, 0x06){}
	Processor (CP05, 0x03, 0x00000410, 0x06){}
	Processor (CP06, 0x05, 0x00000410, 0x06){}
	Processor (CP07, 0x07, 0x00000410, 0x06){}
	Processor (CP08, 0xFF, 0x00000410, 0x06){}
	Processor (CP09, 0xFF, 0x00000410, 0x06){}
	Processor (CP0A, 0xFF, 0x00000410, 0x06){}
	Processor (CP0B, 0xFF, 0x00000410, 0x06){}
...

The processors marked as 0xff are invalid, there are only 8 of them in
this case.

So do not print an error on ids == 0xff, just print an info message.
Actually, we could return ENODEV even on the first CPU with ID 0xff, but
ACPI spec does not forbid the 0xff value to be a processor ID. Given
0xff could be a correct one, we would break working systems if we
returned ENODEV.

Signed-off-by: Jiri Slaby 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35

2019-10-05T10:47:38+00:00

[ Upstream commit 4f7f96453b462b3de0fa18d18fe983960bb5ee7f ]

Some machines change the brightness themselves when a brightness hotkey
gets pressed, despite us telling them not to. This causes the brightness to
go two steps up / down when the hotkey is pressed. This is esp. a problem
on older machines with only a few brightness levels.

This commit adds a new hw_changes_brightness quirk which makes
acpi_video_device_notify() only call backlight_force_update(...,
BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace
that the brightness was changed and leaving it at that fixing the dual
step problem.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077
Reported-by: Kacper Piwiński 
Tested-by: Kacper Piwiński 
Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()

2019-08-16T08:13:54+00:00

[ Upstream commit 5a46d3f71d5e5a9f82eabc682f996f1281705ac7 ]

Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.

Update the comparison condition and clarify the resulting error
message.

Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo 
Reported-by: Dan Carpenter 
Signed-off-by: Lorenzo Pieralisi 
Cc: Dan Carpenter 
Cc: Will Deacon 
Cc: Hanjun Guo 
Cc: Sudeep Holla 
Cc: Catalin Marinas 
Cc: Robin Murphy 
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

ACPI: blacklist: fix clang warning for unused DMI table

2019-08-06T17:05:22+00:00

[ Upstream commit b80d6a42bdc97bdb6139107d6034222e9843c6e2 ]

When CONFIG_DMI is disabled, we only have a tentative declaration,
which causes a warning from clang:

drivers/acpi/blacklist.c:20:35: error: tentative array definition assumed to have one element [-Werror]
static const struct dmi_system_id acpi_rev_dmi_table[] __initconst;

As the variable is not actually used here, hide it entirely
in an #ifdef to shut up the warning.

Signed-off-by: Arnd Bergmann 
Reviewed-by: Nathan Chancellor 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

pstore: Convert buf_lock to semaphore

2019-06-11T10:21:48+00:00

commit ea84b580b95521644429cc6748b6c2bf27c8b0f3 upstream.

Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:

|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G      D           4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...

Reported-by: Sebastian Andrzej Siewior 
Fixes: 21b3ddd39fee ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()

2019-05-31T13:47:17+00:00

[ Upstream commit 23583f7795025e3c783b680d906509366b0906ad ]

When the DSDT tables expose devices with subdevices and a set of
hierarchical _DSD properties, the data returned by
acpi_get_next_subnode() is incorrect, with the results suggesting a bad
pointer assignment. The parser works fine with device_nodes or
data_nodes, but not with a combination of the two.

The problem is traced to an invalid pointer used when jumping from
handling device_nodes to data nodes. The existing code looks for data
nodes below the last subdevice found instead of the common root. Fix
by forcing the acpi_device pointer to be derived from the same fwnode
for the two types of subnodes.

This same problem of handling device and data nodes was already fixed
in a similar way by 'commit bf4703fdd166 ("ACPI / property: fix data
node parsing in acpi_get_next_subnode()")' but broken later by 'commit
34055190b19 ("ACPI / property: Add fwnode_get_next_child_node()")', so
this should probably go to linux-stable all the way to 4.12

Signed-off-by: Pierre-Louis Bossart 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

ACPICA: Namespace: remove address node from global list after method termination

2019-05-16T17:42:30+00:00

[ Upstream commit c5781ffbbd4f742a58263458145fe7f0ac01d9e0 ]

ACPICA commit b233720031a480abd438f2e9c643080929d144c3

ASL operation_regions declare a range of addresses that it uses. In a
perfect world, the range of addresses should be used exclusively by
the AML interpreter. The OS can use this information to decide which
drivers to load so that the AML interpreter and device drivers use
different regions of memory.

During table load, the address information is added to a global
address range list. Each node in this list contains an address range
as well as a namespace node of the operation_region. This list is
deleted at ACPI shutdown.

Unfortunately, ASL operation_regions can be declared inside of control
methods. Although this is not recommended, modern firmware contains
such code. New module level code changes unintentionally removed the
functionality of adding and removing nodes to the global address
range list.

A few months ago, support for adding addresses has been re-
implemented. However, the removal of the address range list was
missed and resulted in some systems to crash due to the address list
containing bogus namespace nodes from operation_regions declared in
control methods. In order to fix the crash, this change removes
dynamic operation_regions after control method termination.

Link: https://github.com/acpica/acpica/commit/b2337200
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475
Fixes: 4abb951b73ff ("ACPICA: AML interpreter: add region addresses in global list during initialization")
Reported-by: Michael J Gruber 
Signed-off-by: Erik Schmauss 
Signed-off-by: Bob Moore 
Cc: 4.20+  # 4.20+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin