linux-stable.git/drivers/acpi, branch v3.4.65

ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT

2013-09-08T04:58:15+00:00

commit 524f42fab787a9510be826ce3d736b56d454ac6d upstream.

The ECDT of ASUSTEK L4R doesn't provide correct command and data
I/O ports.  The DSDT provides the correct information instead.

For this reason, add this machine to quirk list for ECDT validation
and use the EC information from the DSDT.

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=60765
Reported-and-tested-by: Daniele Esposti 
Signed-off-by: Lan Tianyu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / battery: Fix parsing _BIX return value

2013-08-11T22:38:42+00:00

commit 016d5baad04269e8559332df05f89bd95b52d6ad upstream.

The _BIX method returns extended battery info as a package.
According the ACPI spec (ACPI 5, Section 10.2.2.2), the first member
of that package should be "Revision".  However, the current ACPI
battery driver treats the first member as "Power Unit" which should
be the second member.  This causes the result of _BIX return data
parsing to be incorrect.

Fix this by adding a new member called 'revision' to struct
acpi_battery and adding the offsetof() information on it to
extended_info_offsets[] as the first row.

[rjw: Changelog]
Reported-and-tested-by: Jan Hoffmann 
References: http://bugzilla.kernel.org/show_bug.cgi?id=60519
Signed-off-by: Lan Tianyu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / memhotplug: Fix a stale pointer in error path

2013-08-04T08:25:55+00:00

commit d19f503e22316a84c39bc19445e0e4fdd49b3532 upstream.

device->driver_data needs to be cleared when releasing its data,
mem_device, in an error path of acpi_memory_device_add().

The function evaluates the _CRS of memory device objects, and fails
when it gets an unexpected resource or cannot allocate memory.  A
kernel crash or data corruption may occur when the kernel accesses
the stale pointer.

Signed-off-by: Toshi Kani 
Reviewed-by: Yasuaki Ishimatsu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan

2013-07-22T01:19:01+00:00

commit eff9a4b62b14cf0d9913e3caf1f26f8b7a6105c9 upstream.

HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's
_REG method will access that region.  To allow the CMOS RTC region
handler to be installed before the EC _REG method is first invoked,
add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table.

References: https://bugzilla.kernel.org/show_bug.cgi?id=54621
Reported-and-tested-by: Stefan Nagy 
Signed-off-by: Lan Tianyu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6

2013-06-13T16:45:00+00:00

commit 780a6ec640a3fed671fc2c40e4dd30c03eca3ac3 upstream.

This patch addresses kernel bug 56661. BIOS reports an incorrect
backlight value, causing the driver to switch off the backlight
completely during startup. This patch ignores the incorrect value from
BIOS.

References: https://bugzilla.kernel.org/show_bug.cgi?id=56661
Signed-off-by: Ash Willis 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / video: ignore BIOS initial backlight value for HP m4

2013-06-13T16:44:58+00:00

commit fedbe9bc6fd3e14b1ffbb3dac407777ac4a3650c upstream.

On HP m4 lapops, BIOS reports minimum backlight on boot and
causes backlight to dim completely. This ignores the initial backlight
values and set to max brightness.

References: https://bugs.launchpad.net/bugs/1184501
Signed-off-by: Alex Hung 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / EC: Restart transaction even when the IBF flag set

2013-05-19T17:54:49+00:00

commit 28fe5c825f8e15744d04c7c1b8df197950923ecd upstream.

The EC driver works abnormally with IBF flag always set.
IBF means "The host has written a byte of data to the command
or data port, but the embedded controller has not yet read it".
If IBF is set in the EC status and not cleared, this will cause
all subsequent EC requests to fail with a timeout error.

Change the EC driver so that it doesn't refuse to restart a
transaction if IBF is set in the status.  Also increase the
number of transaction restarts to 5, as it turns out that 2
is not sufficient in some cases.

This bug happens on several different machines (Asus V1S,
Dell Latitude E6530, Samsung R719, Acer Aspire 5930G,
Sony Vaio SR19VN and others).

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=14733
References: https://bugzilla.kernel.org/show_bug.cgi?id=15560
References: https://bugzilla.kernel.org/show_bug.cgi?id=15946
References: https://bugzilla.kernel.org/show_bug.cgi?id=42945
References: https://bugzilla.kernel.org/show_bug.cgi?id=48221
Signed-off-by: Lan Tianyu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Fix possible buffer overflow during a field unit read operation

2013-05-19T17:54:35+00:00

commit 61388f9e5d93053cf399a356414f31f9b4814c6d upstream.

Can only happen under these conditions: 1) The DSDT version is 1,
meaning integers are 32-bits.  2) The field is between 33 and 64
bits long.

It applies cleanly back to ACPICA 20100806+ (Linux v2.6.37+).

Signed-off-by: Bob Moore 
Signed-off-by: Lv Zheng 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PCI / ACPI: Don't query OSC support with all possible controls

2013-05-08T02:51:54+00:00

commit 545d6e189a41c94c11f55045a771118eccc9d9eb upstream.

Found problem on system that firmware that could handle pci aer.
Firmware get error reporting after pci injecting error, before os boots.
But after os boots, firmware can not get report anymore, even pci=noaer
is passed.

Root cause: BIOS _OSC has problem with query bit checking.
It turns out that BIOS vendor is copying example code from ACPI Spec.
In ACPI Spec 5.0, page 290:

	If (Not(And(CDW1,1))) // Query flag clear?
	{	// Disable GPEs for features granted native control.
		If (And(CTRL,0x01)) // Hot plug control granted?
		{
			Store(0,HPCE) // clear the hot plug SCI enable bit
			Store(1,HPCS) // clear the hot plug SCI status bit
		}
	...
	}

When Query flag is set, And(CDW1,1) will be 1, Not(1) will return 0xfffffffe.
So it will get into code path that should be for control set only.
BIOS acpi code should be changed to "If (LEqual(And(CDW1,1), 0)))"

Current kernel code is using _OSC query to notify firmware about support
from OS and then use _OSC to set control bits.
During query support, current code is using all possible controls.
So will execute code that should be only for control set stage.

That will have problem when pci=noaer or aer firmware_first is used.
As firmware have that control set for os aer already in query support stage,
but later will not os aer handling.

We should avoid passing all possible controls, just use osc_control_set
instead.
That should workaround BIOS bugs with affected systems on the field
as more bios vendors are copying sample code from ACPI spec.

Signed-off-by: Yinghai Lu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI: Add DMI entry for Sony VGN-FW41E_H

2013-03-03T22:06:44+00:00

commit 66f2fda93b67fa744d406e6dcf443f67bac204b6 upstream.

This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume
properly.

References: http://bugs.launchpad.net/bugs/1113547
Signed-off-by: Joseph Salisbury 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman