<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/acpi, branch v3.16.40</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ACPI / APEI: Fix incorrect return value of ghes_proc()</title>
<updated>2017-02-23T03:54:20+00:00</updated>
<author>
<name>Punit Agrawal</name>
<email>punit.agrawal@arm.com</email>
</author>
<published>2016-10-18T16:07:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0472b28bcde40b44cb802c02a1a8aa5996927d05'/>
<id>0472b28bcde40b44cb802c02a1a8aa5996927d05</id>
<content type='text'>
commit 806487a8fc8f385af75ed261e9ab658fc845e633 upstream.

Although ghes_proc() tests for errors while reading the error status,
it always return success (0). Fix this by propagating the return
value.

Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support)
Signed-of-by: Punit Agrawal &lt;punit.agrawa.@arm.com&gt;
Tested-by: Tyler Baicar &lt;tbaicar@codeaurora.org&gt;
Reviewed-by: Borislav Petkov &lt;bp@suse.de&gt;
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 806487a8fc8f385af75ed261e9ab658fc845e633 upstream.

Although ghes_proc() tests for errors while reading the error status,
it always return success (0). Fix this by propagating the return
value.

Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support)
Signed-of-by: Punit Agrawal &lt;punit.agrawa.@arm.com&gt;
Tested-by: Tyler Baicar &lt;tbaicar@codeaurora.org&gt;
Reviewed-by: Borislav Petkov &lt;bp@suse.de&gt;
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPI / processor: Avoid reserving IO regions too early</title>
<updated>2016-08-22T21:38:07+00:00</updated>
<author>
<name>Rafael J. Wysocki</name>
<email>rafael.j.wysocki@intel.com</email>
</author>
<published>2016-06-01T23:57:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a981d533e1b5348b7575a06229599d2be664590e'/>
<id>a981d533e1b5348b7575a06229599d2be664590e</id>
<content type='text'>
commit 86314751c7945fa0c67f459beeda2e7c610ca429 upstream.

Roland Dreier reports that one of his systems cannot boot because of
the changes made by commit ac212b6980d8 (ACPI / processor: Use common
hotplug infrastructure).

The problematic part of it is the request_region() call in
acpi_processor_get_info() that used to run at module init time before
the above commit and now it runs much earlier.  Unfortunately, the
region(s) reserved by it fall into a range the PCI subsystem attempts
to reserve for AHCI IO BARs.  As a result, the PCI reservation fails
and AHCI doesn't work, while previously the PCI reservation would
be made before acpi_processor_get_info() and it would succeed.

That request_region() call, however, was overlooked by commit
ac212b6980d8, as it is not necessary for the enumeration of the
processors.  It only is needed when the ACPI processor driver
actually attempts to handle them which doesn't happen before
loading the ACPI processor driver module.  Therefore that call
should have been moved from acpi_processor_get_info() into that
module.

Address the problem by moving the request_region() call in question
out of acpi_processor_get_info() and use the observation that the
region reserved by it is only needed if the FADT-based CPU
throttling method is going to be used, which means that it should
be sufficient to invoke it from acpi_processor_get_throttling_fadt().

Fixes: ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure)
Reported-by: Roland Dreier &lt;roland@purestorage.com&gt;
Tested-by: Roland Dreier &lt;roland@purestorage.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 86314751c7945fa0c67f459beeda2e7c610ca429 upstream.

Roland Dreier reports that one of his systems cannot boot because of
the changes made by commit ac212b6980d8 (ACPI / processor: Use common
hotplug infrastructure).

The problematic part of it is the request_region() call in
acpi_processor_get_info() that used to run at module init time before
the above commit and now it runs much earlier.  Unfortunately, the
region(s) reserved by it fall into a range the PCI subsystem attempts
to reserve for AHCI IO BARs.  As a result, the PCI reservation fails
and AHCI doesn't work, while previously the PCI reservation would
be made before acpi_processor_get_info() and it would succeed.

That request_region() call, however, was overlooked by commit
ac212b6980d8, as it is not necessary for the enumeration of the
processors.  It only is needed when the ACPI processor driver
actually attempts to handle them which doesn't happen before
loading the ACPI processor driver module.  Therefore that call
should have been moved from acpi_processor_get_info() into that
module.

Address the problem by moving the request_region() call in question
out of acpi_processor_get_info() and use the observation that the
region reserved by it is only needed if the FADT-based CPU
throttling method is going to be used, which means that it should
be sufficient to invoke it from acpi_processor_get_throttling_fadt().

Fixes: ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure)
Reported-by: Roland Dreier &lt;roland@purestorage.com&gt;
Tested-by: Roland Dreier &lt;roland@purestorage.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPI / sysfs: fix error code in get_status()</title>
<updated>2016-08-22T21:37:54+00:00</updated>
<author>
<name>Dan Carpenter</name>
<email>dan.carpenter@oracle.com</email>
</author>
<published>2016-05-05T13:23:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=37d5d109db8aea4a5cdb3b11abf6aaf0f5d05d86'/>
<id>37d5d109db8aea4a5cdb3b11abf6aaf0f5d05d86</id>
<content type='text'>
commit f18ebc211e259d4f591e39e74b2aa2de226c9a1d upstream.

The problem with ornamental, do-nothing gotos is that they lead to
"forgot to set the error code" bugs.  We should be returning -EINVAL
here but we don't.  It leads to an uninitalized variable in
counter_show():

    drivers/acpi/sysfs.c:603 counter_show()
    error: uninitialized symbol 'status'.

Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c)
Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f18ebc211e259d4f591e39e74b2aa2de226c9a1d upstream.

The problem with ornamental, do-nothing gotos is that they lead to
"forgot to set the error code" bugs.  We should be returning -EINVAL
here but we don't.  It leads to an uninitalized variable in
counter_show():

    drivers/acpi/sysfs.c:603 counter_show()
    error: uninitialized symbol 'status'.

Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c)
Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPICA: Dispatcher: Update thread ID for recursive method calls</title>
<updated>2016-06-15T20:29:30+00:00</updated>
<author>
<name>Prarit Bhargava</name>
<email>prarit@redhat.com</email>
</author>
<published>2016-05-04T05:48:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=eee71883e448e3546abf8a3dd88d692095a85150'/>
<id>eee71883e448e3546abf8a3dd88d692095a85150</id>
<content type='text'>
commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da upstream.

ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25

Set the mutex owner thread ID.
Original patch from: Prarit Bhargava &lt;prarit@redhat.com&gt;

Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121
Link: https://github.com/acpica/acpica/commit/7a3bd2d9
Signed-off-by: Prarit Bhargava &lt;prarit@redhat.com&gt;
Tested-by: Andy Lutomirski &lt;luto@kernel.org&gt; # On a Dell XPS 13 9350
Signed-off-by: Bob Moore &lt;robert.moore@intel.com&gt;
Signed-off-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da upstream.

ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25

Set the mutex owner thread ID.
Original patch from: Prarit Bhargava &lt;prarit@redhat.com&gt;

Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121
Link: https://github.com/acpica/acpica/commit/7a3bd2d9
Signed-off-by: Prarit Bhargava &lt;prarit@redhat.com&gt;
Tested-by: Andy Lutomirski &lt;luto@kernel.org&gt; # On a Dell XPS 13 9350
Signed-off-by: Bob Moore &lt;robert.moore@intel.com&gt;
Signed-off-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Ben Hutchings &lt;ben@decadent.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPI: Use correct IRQ when uninstalling ACPI interrupt handler</title>
<updated>2015-12-13T17:48:55+00:00</updated>
<author>
<name>Chen Yu</name>
<email>yu.c.chen@intel.com</email>
</author>
<published>2015-10-24T17:02:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=79f08032cd797dafafca537e55c78a66897107d7'/>
<id>79f08032cd797dafafca537e55c78a66897107d7</id>
<content type='text'>
commit 49e4b84333f338d4f183f28f1f3c1131b9fb2b5a upstream.

Currently when the system is trying to uninstall the ACPI interrupt
handler, it uses acpi_gbl_FADT.sci_interrupt as the IRQ number.
However, the IRQ number that the ACPI interrupt handled is installed
for comes from acpi_gsi_to_irq() and that is the number that should
be used for the handler removal.

Fix this problem by using the mapped IRQ returned from acpi_gsi_to_irq()
as appropriate.

Acked-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Chen Yu &lt;yu.c.chen@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 49e4b84333f338d4f183f28f1f3c1131b9fb2b5a upstream.

Currently when the system is trying to uninstall the ACPI interrupt
handler, it uses acpi_gbl_FADT.sci_interrupt as the IRQ number.
However, the IRQ number that the ACPI interrupt handled is installed
for comes from acpi_gsi_to_irq() and that is the number that should
be used for the handler removal.

Fix this problem by using the mapped IRQ returned from acpi_gsi_to_irq()
as appropriate.

Acked-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Chen Yu &lt;yu.c.chen@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)</title>
<updated>2015-09-28T09:21:41+00:00</updated>
<author>
<name>Maciej S. Szmigiero</name>
<email>mail@maciej.szmigiero.name</email>
</author>
<published>2015-08-02T21:15:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f9fe1ee65a78fce29c2d9f10677688b6dfe07921'/>
<id>f9fe1ee65a78fce29c2d9f10677688b6dfe07921</id>
<content type='text'>
commit 1d7002777a8fe8188caaa98d4a8eb4ed298fcdae upstream.

This way this device can be used with irtty-sir -
at least on Toshiba Satellite A20-S103 it is not configured by default
and needs PNP activation before it starts to respond on I/O ports.

This device has actually its own driver (ali-ircc),
but this driver seems to be non-functional for a very long time
(see http://permalink.gmane.org/gmane.linux.irda.general/484
http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ).

Signed-off-by: Maciej Szmigiero &lt;mail@maciej.szmigiero.name&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1d7002777a8fe8188caaa98d4a8eb4ed298fcdae upstream.

This way this device can be used with irtty-sir -
at least on Toshiba Satellite A20-S103 it is not configured by default
and needs PNP activation before it starts to respond on I/O ports.

This device has actually its own driver (ali-ircc),
but this driver seems to be non-functional for a very long time
(see http://permalink.gmane.org/gmane.linux.irda.general/484
http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ).

Signed-off-by: Maciej Szmigiero &lt;mail@maciej.szmigiero.name&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage</title>
<updated>2015-07-15T09:01:34+00:00</updated>
<author>
<name>Rafael J. Wysocki</name>
<email>rafael.j.wysocki@intel.com</email>
</author>
<published>2015-07-04T01:09:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=669b7b31abcdc376ae9a4d03df7d7fc0fbccd1e7'/>
<id>669b7b31abcdc376ae9a4d03df7d7fc0fbccd1e7</id>
<content type='text'>
commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream.

This effectively reverts the following three commits:

 7bc10388ccdd ACPI / resources: free memory on error in add_region_before()
 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations
 b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources()

(commit b9a5e5e18fbf introduced regressions some of which, but not
all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.

The story is as follows.  First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes.  Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.

The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d1907.

That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook.  That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d1907 wouldn't be
necessary any more.

For this reason, the changes made by commit 0f1b414d1907 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18fbf that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581
Link: http://marc.info/?t=143092384600002&amp;r=1&amp;w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&amp;r=1&amp;w=2
Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier &lt;roland@purestorage.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream.

This effectively reverts the following three commits:

 7bc10388ccdd ACPI / resources: free memory on error in add_region_before()
 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations
 b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources()

(commit b9a5e5e18fbf introduced regressions some of which, but not
all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.

The story is as follows.  First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes.  Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.

The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d1907.

That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook.  That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d1907 wouldn't be
necessary any more.

For this reason, the changes made by commit 0f1b414d1907 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18fbf that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581
Link: http://marc.info/?t=143092384600002&amp;r=1&amp;w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&amp;r=1&amp;w=2
Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier &lt;roland@purestorage.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPI / init: Switch over platform to the ACPI mode later</title>
<updated>2015-07-15T09:01:26+00:00</updated>
<author>
<name>Rafael J. Wysocki</name>
<email>rafael.j.wysocki@intel.com</email>
</author>
<published>2015-06-09T23:33:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=dfa4158724e364701f14ee0fc9fcc2ad8f3deee7'/>
<id>dfa4158724e364701f14ee0fc9fcc2ad8f3deee7</id>
<content type='text'>
commit b064a8fa77dfead647564c46ac8fc5b13bd1ab73 upstream.

Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early.  Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later".

However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.

To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.

That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann &lt;tolzmann@molgen.mpg.de&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Acked-by: Toshi Kani &lt;toshi.kani@hp.com&gt;
Reviewed-by: Hanjun Guo &lt;hanjun.guo@linaro.org&gt;
Reviewed-by: Lee, Chun-Yi &lt;jlee@suse.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit b064a8fa77dfead647564c46ac8fc5b13bd1ab73 upstream.

Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early.  Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later".

However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.

To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.

That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann &lt;tolzmann@molgen.mpg.de&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Acked-by: Toshi Kani &lt;toshi.kani@hp.com&gt;
Reviewed-by: Hanjun Guo &lt;hanjun.guo@linaro.org&gt;
Reviewed-by: Lee, Chun-Yi &lt;jlee@suse.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPICA: Tables: Fix an issue that FACS initialization is performed twice</title>
<updated>2015-07-15T09:01:10+00:00</updated>
<author>
<name>Lv Zheng</name>
<email>lv.zheng@intel.com</email>
</author>
<published>2015-07-01T06:43:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=61bc6a291c488653b32aeb54415ca08ed96cf43e'/>
<id>61bc6a291c488653b32aeb54415ca08ed96cf43e</id>
<content type='text'>
commit c04be18448355441a0c424362df65b6422e27bda upstream.

ACPICA commit 90f5332a15e9d9ba83831ca700b2b9f708274658

This patch adds a new FACS initialization flag for acpi_tb_initialize().
acpi_enable_subsystem() might be invoked several times in OS bootup process,
and we don't want FACS initialization to be invoked twice. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/90f5332a
Signed-off-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Bob Moore &lt;robert.moore@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit c04be18448355441a0c424362df65b6422e27bda upstream.

ACPICA commit 90f5332a15e9d9ba83831ca700b2b9f708274658

This patch adds a new FACS initialization flag for acpi_tb_initialize().
acpi_enable_subsystem() might be invoked several times in OS bootup process,
and we don't want FACS initialization to be invoked twice. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/90f5332a
Signed-off-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Bob Moore &lt;robert.moore@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPICA: Tables: Enable both 32-bit and 64-bit FACS</title>
<updated>2015-07-15T09:01:10+00:00</updated>
<author>
<name>Lv Zheng</name>
<email>lv.zheng@intel.com</email>
</author>
<published>2015-07-01T06:43:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b078ec8527b6a9aca35db8adebf0cb603986fe30'/>
<id>b078ec8527b6a9aca35db8adebf0cb603986fe30</id>
<content type='text'>
commit c04e1fb4396d27f18296db0f914760fa7fe8223a upstream.

ACPICA commit f7b86f35416e3d1f71c3d816ff5075ddd33ed486

The following commit is reported to have broken s2ram on some platforms:
 Commit: 0249ed2444d65d65fc3f3f64f398f1ad0b7e54cd
 ACPICA: Add option to favor 32-bit FADT addresses.
The platform reports 2 FACS tables (which is not allowed by ACPI
specification) and the new 32-bit address favor rule forces OSPMs to use
the FACS table reported via FADT's X_FIRMWARE_CTRL field.

The root cause of the reported bug might be one of the followings:
1. BIOS may favor the 64-bit firmware waking vector address when the
   version of the FACS is greater than 0 and Linux currently only supports
   resuming from the real mode, so the 64-bit firmware waking vector has
   never been set and might be invalid to BIOS while the commit enables
   higher version FACS.
2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the
   FADT while the commit doesn't set the firmware waking vector address of
   the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking
   vector address of the FACS reported by "X_FIRMWARE_CTRL".

This patch excludes the cases that can trigger the bugs caused by the root
cause 2.

There is no handshaking mechanism can be used by OSPM to tell BIOS which
FACS is currently used. Thus the FACS reported by "FIRMWARE_CTRL" may still
be used by BIOS and the 0 value of the 32-bit firmware waking vector might
trigger such failure.

This patch tries to favor 32bit FACS address in another way where both the
FACS reported by "FIRMWARE_CTRL" and the FACS reported by "X_FIRMWARE_CTRL"
are loaded so that further commit can set firmware waking vector in the
both tables to ensure we can exclude the cases that trigger the bugs caused
by the root cause 2. The exclusion is split into 2 commits as this commit
is also useful for dumping more ACPI tables, it won't get reverted when
such exclusion is no longer necessary. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/f7b86f35
Reported-and-tested-by: Oswald Buddenhagen &lt;ossi@kde.org&gt;
Signed-off-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Bob Moore &lt;robert.moore@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit c04e1fb4396d27f18296db0f914760fa7fe8223a upstream.

ACPICA commit f7b86f35416e3d1f71c3d816ff5075ddd33ed486

The following commit is reported to have broken s2ram on some platforms:
 Commit: 0249ed2444d65d65fc3f3f64f398f1ad0b7e54cd
 ACPICA: Add option to favor 32-bit FADT addresses.
The platform reports 2 FACS tables (which is not allowed by ACPI
specification) and the new 32-bit address favor rule forces OSPMs to use
the FACS table reported via FADT's X_FIRMWARE_CTRL field.

The root cause of the reported bug might be one of the followings:
1. BIOS may favor the 64-bit firmware waking vector address when the
   version of the FACS is greater than 0 and Linux currently only supports
   resuming from the real mode, so the 64-bit firmware waking vector has
   never been set and might be invalid to BIOS while the commit enables
   higher version FACS.
2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the
   FADT while the commit doesn't set the firmware waking vector address of
   the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking
   vector address of the FACS reported by "X_FIRMWARE_CTRL".

This patch excludes the cases that can trigger the bugs caused by the root
cause 2.

There is no handshaking mechanism can be used by OSPM to tell BIOS which
FACS is currently used. Thus the FACS reported by "FIRMWARE_CTRL" may still
be used by BIOS and the 0 value of the 32-bit firmware waking vector might
trigger such failure.

This patch tries to favor 32bit FACS address in another way where both the
FACS reported by "FIRMWARE_CTRL" and the FACS reported by "X_FIRMWARE_CTRL"
are loaded so that further commit can set firmware waking vector in the
both tables to ensure we can exclude the cases that trigger the bugs caused
by the root cause 2. The exclusion is split into 2 commits as this commit
is also useful for dumping more ACPI tables, it won't get reverted when
such exclusion is no longer necessary. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/f7b86f35
Reported-and-tested-by: Oswald Buddenhagen &lt;ossi@kde.org&gt;
Signed-off-by: Lv Zheng &lt;lv.zheng@intel.com&gt;
Signed-off-by: Bob Moore &lt;robert.moore@intel.com&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Luis Henriques &lt;luis.henriques@canonical.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
