linux-stable.git/drivers/acpi, branch linux-3.14.y

ACPI / sysfs: fix error code in get_status()

2016-09-07T06:30:01+00:00

commit f18ebc211e259d4f591e39e74b2aa2de226c9a1d upstream.

The problem with ornamental, do-nothing gotos is that they lead to
"forgot to set the error code" bugs.  We should be returning -EINVAL
here but we don't.  It leads to an uninitalized variable in
counter_show():

    drivers/acpi/sysfs.c:603 counter_show()
    error: uninitialized symbol 'status'.

Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c)
Signed-off-by: Dan Carpenter 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings

2016-06-01T19:12:47+00:00

commit 30c9bb0d7603e7b3f4d6a0ea231e1cddae020c32 upstream.

The order of the _OSI related functionalities is as follows:

  acpi_blacklisted()
    acpi_dmi_osi_linux()
      acpi_osi_setup()
    acpi_osi_setup()
      acpi_update_interfaces() if "!*"
      <<<<<<<<<<<<<<<<<<<<<<<<
  parse_args()
    __setup("acpi_osi=")
      acpi_osi_setup_linux()
        acpi_update_interfaces() if "!*"
        <<<<<<<<<<<<<<<<<<<<<<<<
  acpi_early_init()
    acpi_initialize_subsystem()
      acpi_ut_initialize_interfaces()
      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  acpi_bus_init()
    acpi_os_initialize1()
      acpi_install_interface_handler(acpi_osi_handler)
      acpi_osi_setup_late()
        acpi_update_interfaces() for "!"
        >>>>>>>>>>>>>>>>>>>>>>>>
  acpi_osi_handler()

Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command
line setting can override the DMI detection. That's why acpi_blacklisted()
is put before __setup("acpi_osi=").

Then we can notice the following wrong invocation order. There are
acpi_update_interfaces() (marked by <<<<) calls invoked before
acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible
to use acpi_osi=!* correctly from OSI DMI table or from the command line.
The use of acpi_osi=!* is meant to disable both ACPICA
(acpi_gbl_supported_interfaces) and Linux specific strings
(osi_setup_entries) while the ACPICA part should have stopped working
because of the order issue.

This patch fixes this issue by moving acpi_update_interfaces() to where
it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be
invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux
specific strings are still handled in the original place in order to make
the following command line working: acpi_osi=!* acpi_osi="Module Device".

Note that since acpi_osi=!* is meant to further disable linux specific
string comparing to the acpi_osi=!, there is no such use case in our bug
fixing work and hence there is no one using acpi_osi=!* either from the
command line or from the DMI quirks, this issue is just a theoretical
issue.

Fixes: 741d81280ad2 (ACPI: Add facility to remove all _OSI strings)
Tested-by: Lukas Wunner 
Tested-by: Chen Yu 
Signed-off-by: Lv Zheng 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Dispatcher: Update thread ID for recursive method calls

2016-05-11T09:21:02+00:00

commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da upstream.

ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25

Set the mutex owner thread ID.
Original patch from: Prarit Bhargava 

Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121
Link: https://github.com/acpica/acpica/commit/7a3bd2d9
Signed-off-by: Prarit Bhargava 
Tested-by: Andy Lutomirski  # On a Dell XPS 13 9350
Signed-off-by: Bob Moore 
Signed-off-by: Lv Zheng 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Tables: Fix an issue that FACS initialization is performed twice

2015-08-03T16:29:57+00:00

commit c04be18448355441a0c424362df65b6422e27bda upstream.

ACPICA commit 90f5332a15e9d9ba83831ca700b2b9f708274658

This patch adds a new FACS initialization flag for acpi_tb_initialize().
acpi_enable_subsystem() might be invoked several times in OS bootup process,
and we don't want FACS initialization to be invoked twice. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/90f5332a
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / init: Switch over platform to the ACPI mode later

2015-08-03T16:29:50+00:00

commit b064a8fa77dfead647564c46ac8fc5b13bd1ab73 upstream.

Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early.  Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later".

However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.

To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.

That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann 
Signed-off-by: Rafael J. Wysocki 
Acked-by: Toshi Kani 
Reviewed-by: Hanjun Guo 
Reviewed-by: Lee, Chun-Yi 
Signed-off-by: Greg Kroah-Hartman

ACPI / init: Fix the ordering of acpi_reserve_resources()

2015-06-06T15:19:39+00:00

commit b9a5e5e18fbf223502c0b2264c15024e393da928 upstream.

Since acpi_reserve_resources() is defined as a device_initcall(),
there's no guarantee that it will be executed in the right order
with respect to the rest of the ACPI initialization code.  On some
systems this leads to breakage if, for example, the address range
that should be reserved for the ACPI fixed registers is given to
the PCI host bridge instead if the race is won by the wrong code
path.

Fix this by turning acpi_reserve_resources() into a void function
and calling it directly from within the ACPI initialization sequence.

Reported-and-tested-by: George McCollister 
Link: http://marc.info/?t=143092384600002&r=1&w=2
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Utilities: Cleanup to remove useless ACPI_PRINTF/FORMAT_xxx helpers.

2015-05-17T16:53:51+00:00

commit 1d0a0b2f6df2bf2643fadc990eb143361eca6ada upstream.

ACPICA commit b60612373a4ef63b64a57c124576d7ddb6d8efb6

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT
and ACPI_FORMAT_UINT64() instead of
ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT().

This patch also removes above replaced macros as there are no users.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/b6061237
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Utilities: Cleanup to convert physical address printing formats.

2015-05-17T16:53:51+00:00

commit cc2080b0e5a7c6c33ef5e9ffccbc2b8f6f861393 upstream.

ACPICA commit 7f06739db43a85083a70371c14141008f20b2198

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to
convert the %p formats.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/7f06739d
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
[gdavis: Apply changes to drivers/acpi/acpica/{tbutils,tbxfload}.c]
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Utilities: Cleanup to enforce ACPI_PHYSADDR_TO_PTR()/ACPI_PTR_TO_PHYSADDR().

2015-05-17T16:53:51+00:00

commit 6d3fd3cc33d50e4c0d0c0bd172de02caaec3127c upstream.

ACPICA commit 154f6d074dd38d6ebc0467ad454454e6c5c9ecdf

There are code pieces converting pointers using "(acpi_physical_address) x"
or "ACPI_CAST_PTR (t, x)" formats, this patch cleans up them.

Known issues:
1. Cleanup of "(ACPI_PHYSICAL_ADDRRESS) x" for a table field
   For the conversions around the table fields, it is better to fix it with
   alignment also fixed. So this patch doesn't modify such code. There
   should be no functional problem by leaving them unchanged.

Link: https://github.com/acpica/acpica/commit/154f6d07
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.

2015-05-17T16:53:51+00:00

commit f254e3c57b9d952e987502aefa0804c177dd2503 upstream.

ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3

OSPMs like Linux expect an acpi_physical_address returning value from
acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't
equal to sizeof (acpi_physical_address):
  drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default]
  In file included from include/acpi/acpi.h:64:0,
                   from include/linux/acpi.h:36,
                   from drivers/acpi/osl.c:41:
  include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *'
This patch corrects acpi_find_root_pointer().

Link: https://github.com/acpica/acpica/commit/7d9fd643
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman