Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...

* acpi-scan:
  ACPI / scan: Add labels for PNP button devices
  ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package()

* acpi-tables:
  ACPI / tables: Clean up whitespace

* acpi-misc:
  ACPI / DPTF: Use dev_get_drvdata()
  ACPI: event: replace strcpy() by strscpy()
  ACPI: Fix comment typos

* acpi-pm:
  ACPI: PM: Print debug messages when enabling GPEs for wakeup

ACPICA commit 92ec0935f27e217dff0b176fca02c2ec3d782bb5

ACPI_COMPARE_NAME changed to ACPI_COMPARE_NAMESEG
This clarifies (1) this is a compare on 4-byte namesegs, not
a generic compare. Improves understanding of the code.

Link: https://github.com/acpica/acpica/commit/92ec0935
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Parsing entries in an ACPI table had assumed a generic header
structure. There is no standard ACPI header, though, so less common
layouts with different field sizes required custom parsers to go through
their subtable entry list.

Create the infrastructure for adding different table types so parsing
the entries array may be more reused for all ACPI system tables and
the common code doesn't need to be duplicated.

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Subsequent code treats button_device_ids[] entries differently, and
it's hard to follow without a hint as to which is which.

Add comments to identify the power button, lid, and sleep button
devices.

The "PNP" prefix is owned by Microsoft, so they distribute the
canonical list of "PNP" IDs.

Link: https://uefi.org/PNP_ACPI_Registry
Link: https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/devids.txt
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

acpi_bus_extract_wakeup_device_power_package() is a static function
with a single caller that supplies (device->handle, &device->wakeup).

Simplify the interface so the caller need only supply "device".

This makes it obvious that "wakeup", i.e., &device->wakeup, can never
be NULL, so remove the unnecessary check for that.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix some misspellings in comments.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The Point of View TAB-P1006W-232-3G tablet has an ACPI firmware node with
a HID of BSG2150 describing the 2 Bosch sensors used in the device a
BMC150 compatible accelerometer and a BMC150 compatible magnetometer.

The ACPI firmware node actually contains 3 I2cSerialBusV2 resources,
but this seems to be a copy and paste job from the BSG1160 firmware node
on other devices, since there is no i2c-client listening to the 0x68
address listed in the third resource and the 0x68 address is identical
to the address of the third resource in the BSG1160 nodes, where as the
other 2 addresses are different.

Add the ID to the I2C multi instantiate list, so that the
i2c-multi-instantiate.c driver can handle it;

And add the necessary info to the i2c-multi-instantiate.c driver to
enumerate all I2C slaves correctly.

To avoid triggering the:

        if (i < multi->num_clients) {
                dev_err(dev, "Error finding driver, idx %d\n", i);

Error this commit lists the 3th device in the i2c_inst_data with a
type of "bsg2150_dummy_dev".

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull DMA mapping updates from Christoph Hellwig:
 "A huge update this time, but a lot of that is just consolidating or
  removing code:

   - provide a common DMA_MAPPING_ERROR definition and avoid indirect
     calls for dma_map_* error checking

   - use direct calls for the DMA direct mapping case, avoiding huge
     retpoline overhead for high performance workloads

   - merge the swiotlb dma_map_ops into dma-direct

   - provide a generic remapping DMA consistent allocator for
     architectures that have devices that perform DMA that is not cache
     coherent. Based on the existing arm64 implementation and also used
     for csky now.

   - improve the dma-debug infrastructure, including dynamic allocation
     of entries (Robin Murphy)

   - default to providing chaining scatterlist everywhere, with opt-outs
     for the few architectures (alpha, parisc, most arm32 variants) that
     can't cope with it

   - misc sparc32 dma-related cleanups

   - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
     replace it with the generic noncoherent infrastructure

   - fix the return type of dma_set_max_seg_size (Niklas Söderlund)

   - move the dummy dma ops for not DMA capable devices from arm64 to
     common code (Robin Murphy)

   - ensure dma_alloc_coherent returns zeroed memory to avoid kernel
     data leaks through userspace. We already did this for most common
     architectures, but this ensures we do it everywhere.
     dma_zalloc_coherent has been deprecated and can hopefully be
     removed after -rc1 with a coccinelle script"

* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
  dma-mapping: fix inverted logic in dma_supported
  dma-mapping: deprecate dma_zalloc_coherent
  dma-mapping: zero memory returned from dma_alloc_*
  sparc/iommu: fix ->map_sg return value
  sparc/io-unit: fix ->map_sg return value
  arm64: default to the direct mapping in get_arch_dma_ops
  PCI: Remove unused attr variable in pci_dma_configure
  ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
  dma-mapping: bypass indirect calls for dma-direct
  vmd: use the proper dma_* APIs instead of direct methods calls
  dma-direct: merge swiotlb_dma_ops into the dma_direct code
  dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
  dma-direct: improve addressability error reporting
  swiotlb: remove dma_mark_clean
  swiotlb: remove SWIOTLB_MAP_ERROR
  ACPI / scan: Refactor _CCA enforcement
  dma-mapping: factor out dummy DMA ops
  dma-mapping: always build the direct mapping code
  dma-mapping: move dma_cache_sync out of line
  dma-mapping: move various slow path functions out of line
  ...