linux-stable.git/crypto/tcrypt.c, branch v4.1

crypto: tcrypt - fix uninit sg entries in test_acipher_speed

2015-03-11T14:11:05+00:00

Commit 5be4d4c94b1f ("crypto: replace scatterwalk_sg_next with sg_next")
did not consider the fact that scatterwalk_sg_next() was looking at
sg entry length, while sg_next() looks at the "chained" sg bit.

This should have no effect in theory. However in practice, there are
cases where the sg table is initialized to a number of entries and
some of them are not properly configured. While scatterwalk_sg_next()
would have returned NULL (since sg length = 0 and sg page_link = 0),
sg_next() happily returns the next unconfigured sg entry.

insmod tcrypt.ko mode=500 sec=1

testing speed of async cbc(aes) (cbc-aes-talitos) encryption
test 0 (128 bit key, 16 byte blocks):
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc00d79e4
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 P1022 DS
Modules linked in: tcrypt(+) talitos
CPU: 0 PID: 2670 Comm: insmod Not tainted 4.0.0-rc1-QorIQ-SDK-V1.6+g904f1ca82209 #1
task: e8de3200 ti: e70bc000 task.ti: e70bc000
NIP: c00d79e4 LR: f92d223c CTR: c00d79c8
REGS: e70bda00 TRAP: 0300   Not tainted  (4.0.0-rc1-QorIQ-SDK-V1.6+g904f1ca82209)
MSR: 00029000   CR: 84428f22  XER: 00000000
DEAR: 00000000 ESR: 00000000
GPR00: f92d223c e70bdab0 e8de3200 00000000 e70bdbb8 00000001 00000000 00000000
GPR08: 00000000 00000000 c08b0380 27282010 c00d79c8 1003a634 00000000 e70bdf1c
GPR16: e70bdef0 00000020 00000000 c08c0000 00000010 00000000 e70bdbb8 00000010
GPR24: e976d3a8 00000010 00000000 e70bdbd8 e8961010 00000001 c086e560 00000000
NIP [c00d79e4] page_address+0x1c/0x110
LR [f92d223c] talitos_map_sg+0x130/0x184 [talitos]
Call Trace:
[e70bdab0] [00000010] 0x10 (unreliable)
[e70bdad0] [f92d223c] talitos_map_sg+0x130/0x184 [talitos]
[e70bdb00] [f92d30d8] common_nonsnoop.constprop.13+0xc0/0x304 [talitos]
[e70bdb30] [f933fd90] test_acipher_speed+0x434/0x7dc [tcrypt]
[e70bdcc0] [f934318c] do_test+0x2478/0x306c [tcrypt]
[e70bdd80] [f11fe058] tcrypt_mod_init+0x58/0x100 [tcrypt]
[e70bdda0] [c0002354] do_one_initcall+0x90/0x1f4
[e70bde10] [c061fe00] do_init_module+0x60/0x1ac
[e70bde30] [c00a79f0] load_module+0x185c/0x1f88
[e70bdee0] [c00a82b0] SyS_finit_module+0x7c/0x98
[e70bdf40] [c000e8b0] ret_from_syscall+0x0/0x3c

Signed-off-by: Herbert Xu

crypto: tcrypt - do not allocate iv on stack for aead speed tests

2015-02-04T09:59:42+00:00

See also: 9bac019dad8098a77cce555d929f678e22111783

Signed-off-by: Cristian Stoica 
Signed-off-by: Herbert Xu

crypto: tcrypt - fix buflen reminder calculation

2015-02-04T09:59:41+00:00

- This fixes the intent of the code to limit the last scatterlist to
  either a full PAGE or a fraction of it, depending on the number of
  pages needed by buflen and the available space advertised by XBUFLEN.

  The original code always sets the last scatterlist to a fraction of a
  PAGE because the first 'if' is never executed.

- Rearrange the second part of the code to remove the conditional from
  the loop

Signed-off-by: Cristian Stoica 
Signed-off-by: Herbert Xu

crypto: testmgr - don't use interruptible wait in tests

2015-01-13T11:30:44+00:00

tcrypt/testmgr uses wait_for_completion_interruptible() everywhere when
it waits for a request to be completed.  If it's interrupted, then the
test is aborted and the request is freed.

However, if any of these calls actually do get interrupted, the result
will likely be a kernel crash, when the driver handles the now-freed
request.  Use wait_for_completion() instead.

Signed-off-by: Rabin Vincent 
Signed-off-by: Herbert Xu

crypto: tcrypt - Allow speed testing of arbitrary hash functions

2014-12-05T15:57:47+00:00

This patch allows the testing of arbitrary hash functions specified
by the alg module parameter by using them in mode 300 (for sync hash)
and mode 400 (for async hash).

For example, you could do
	modprobe tcrypt mode=300 alg='vmac(aes)'

Signed-off-by: Herbert Xu

crypto: Resolve shadow warnings

2014-08-01T14:35:55+00:00

Change formal parameters to not clash with global names to
eliminate many W=2 warnings.

Signed-off-by: Mark Rustad 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Herbert Xu

crypto: tcrypt - print cra driver name in tcrypt tests output

2014-07-03T13:42:09+00:00

Print the driver name that is being tested. The driver name can be
inferred parsing /proc/crypto but having it in the output is
clearer

Signed-off-by: Luca Clementi 
Signed-off-by: Herbert Xu

crypto: tcrypt - add ctr(des3_ede) sync speed test

2014-06-20T13:27:57+00:00

Signed-off-by: Jussi Kivilinna 
Signed-off-by: Herbert Xu

crypto: testmgr - add aead cbc des, des3_ede tests

2014-05-22T13:03:18+00:00

Test vectors were taken from existing test for
CBC(DES3_EDE). Associated data has been added to test vectors.
HMAC computed with Crypto++ has been used. Following algos have
been covered.

        (a) "authenc(hmac(sha1),cbc(des))"
        (b) "authenc(hmac(sha1),cbc(des3_ede))"
        (c) "authenc(hmac(sha224),cbc(des))"
        (d) "authenc(hmac(sha224),cbc(des3_ede))"
        (e) "authenc(hmac(sha256),cbc(des))"
        (f) "authenc(hmac(sha256),cbc(des3_ede))"
        (g) "authenc(hmac(sha384),cbc(des))"
        (h) "authenc(hmac(sha384),cbc(des3_ede))"
        (i) "authenc(hmac(sha512),cbc(des))"
        (j) "authenc(hmac(sha512),cbc(des3_ede))"

Signed-off-by: Vakul Garg 
[NiteshNarayanLal@freescale.com: added hooks for the missing algorithms test and tested the patch]
Signed-off-by: Nitesh Lal 
Signed-off-by: Herbert Xu

crypto: tcrypt - Fix leak of struct aead_request in test_aead_speed()

2014-04-28T10:21:18+00:00

Fix leakage of memory for struct aead_request that is allocated via
aead_request_alloc() but not released via aead_request_free().
Reported by Coverity - CID 1163869.

Signed-off-by: Christian Engelmayer 
Reviewed-by: Marek Vasut 
Acked-by: Tim Chen 
Signed-off-by: Herbert Xu