linux-stable.git/crypto/sha256_generic.c, branch linux-5.2.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

crypto: run initcalls for generic implementations earlier

2019-04-18T14:15:03+00:00

Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init.  Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed.  So, unaligned accesses will crash the kernel.  This is
arguably a good thing as it makes it easier to detect that type of bug.

Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu

crypto: shash - remove useless setting of type flags

2018-07-08T16:30:24+00:00

Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH.  But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the shash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu

crypto: sha256_generic - add cra_priority

2018-07-08T16:30:20+00:00

sha256-generic and sha224-generic had a cra_priority of 0, so it wasn't
possible to have a lower priority SHA-256 or SHA-224 implementation, as
is desired for sha256_mb which is only useful under certain workloads
and is otherwise extremely slow.  Change them to priority 100, which is
the priority used for many of the other generic algorithms.

Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu

crypto: hash - add zero length message hash for shax and md5

2015-12-22T12:43:35+00:00

Some crypto drivers cannot process empty data message and return a
precalculated hash for md5/sha1/sha224/sha256.

This patch add thoses precalculated hash in include/crypto.

Signed-off-by: LABBE Corentin 
Signed-off-by: Herbert Xu

crypto: sha256-generic - move to generic glue implementation

2015-04-10T13:39:41+00:00

This updates the generic SHA-256 implementation to use the
new shared SHA-256 glue code.

It also implements a .finup hook crypto_sha256_finup() and exports
it to other modules. The import and export() functions and the
.statesize member are dropped, since the default implementation
is perfectly suitable for this module.

Signed-off-by: Ard Biesheuvel 
Signed-off-by: Herbert Xu

crypto: add missing crypto module aliases

2015-01-13T11:29:11+00:00

Commit 5d26a105b5a7 ("crypto: prefix module autoloading with "crypto-"")
changed the automatic module loading when requesting crypto algorithms
to prefix all module requests with "crypto-". This requires all crypto
modules to have a crypto specific module alias even if their file name
would otherwise match the requested crypto algorithm.

Even though commit 5d26a105b5a7 added those aliases for a vast amount of
modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO
annotations to those files to make them get loaded automatically, again.
This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work
with kernels v3.18 and below.

Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former
won't work for crypto modules any more.

Fixes: 5d26a105b5a7 ("crypto: prefix module autoloading with "crypto-"")
Cc: Kees Cook 
Signed-off-by: Mathias Krause 
Signed-off-by: Herbert Xu

crypto: prefix module autoloading with "crypto-"

2014-11-24T14:43:57+00:00

This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook 
Signed-off-by: Herbert Xu

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

2014-10-24T19:33:32+00:00

Pull /dev/random updates from Ted Ts'o:
 "This adds a memzero_explicit() call which is guaranteed not to be
  optimized away by GCC.  This is important when we are wiping
  cryptographically sensitive material"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  crypto: memzero_explicit - make sure to clear out sensitive data
  random: add and use memzero_explicit() for clearing data

crypto: memzero_explicit - make sure to clear out sensitive data

2014-10-17T15:44:07+00:00

Recently, in commit 13aa93c70e71 ("random: add and use memzero_explicit()
for clearing data"), we have found that GCC may optimize some memset()
cases away when it detects a stack variable is not being used anymore
and going out of scope. This can happen, for example, in cases when we
are clearing out sensitive information such as keying material or any
e.g. intermediate results from crypto computations, etc.

With the help of Coccinelle, we can figure out and fix such occurences
in the crypto subsytem as well. Julia Lawall provided the following
Coccinelle program:

  @@
  type T;
  identifier x;
  @@

  T x;
  ... when exists
      when any
  -memset
  +memzero_explicit
     (&x,
  -0,
     ...)
  ... when != x
      when strict

  @@
  type T;
  identifier x;
  @@

  T x[...];
  ... when exists
      when any
  -memset
  +memzero_explicit
     (x,
  -0,
     ...)
  ... when != x
      when strict

Therefore, make use of the drop-in replacement memzero_explicit() for
exactly such cases instead of using memset().

Signed-off-by: Daniel Borkmann 
Cc: Julia Lawall 
Cc: Herbert Xu 
Cc: Theodore Ts'o 
Cc: Hannes Frederic Sowa 
Acked-by: Hannes Frederic Sowa 
Acked-by: Herbert Xu 
Signed-off-by: Theodore Ts'o