<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/block, branch v6.18.39</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>partitions: aix: bound the pp_count scan to the ppe array</title>
<updated>2026-07-18T14:53:27+00:00</updated>
<author>
<name>Bryam Vargas</name>
<email>hexlabsecurity@proton.me</email>
</author>
<published>2026-06-07T06:41:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ce93228e2193a17d2c58b656e439bb39fe5c3af8'/>
<id>ce93228e2193a17d2c58b656e439bb39fe5c3af8</id>
<content type='text'>
commit 2dc0bfd2fe355fb930de63c2f2eb8ced8570c579 upstream.

aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:

	int numpps = be16_to_cpu(pvd-&gt;pp_count);
	...
	for (i = 0; i &lt; numpps; i += 1) {
		struct ppe *p = pvd-&gt;ppe + i;
		...
		lp_ix = be16_to_cpu(p-&gt;lp_ix);

pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd-&gt;ppe) (1016) entries, but the loop runs up to the
on-disk pp_count.  pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd-&gt;ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).

The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -&gt; aix_partition().

Clamp the scan to the number of entries the ppe[] array can hold.

Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Acked-by: Philippe De Muyter &lt;phdm@macqel.be&gt;
Link: https://patch.msgid.link/20260607064137.302574-1-hexlabsecurity@proton.me
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2dc0bfd2fe355fb930de63c2f2eb8ced8570c579 upstream.

aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:

	int numpps = be16_to_cpu(pvd-&gt;pp_count);
	...
	for (i = 0; i &lt; numpps; i += 1) {
		struct ppe *p = pvd-&gt;ppe + i;
		...
		lp_ix = be16_to_cpu(p-&gt;lp_ix);

pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd-&gt;ppe) (1016) entries, but the loop runs up to the
on-disk pp_count.  pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd-&gt;ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).

The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -&gt; aix_partition().

Clamp the scan to the number of entries the ppe[] array can hold.

Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Acked-by: Philippe De Muyter &lt;phdm@macqel.be&gt;
Link: https://patch.msgid.link/20260607064137.302574-1-hexlabsecurity@proton.me
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: partitions: fix of_node refcount leak in of_partition()</title>
<updated>2026-07-18T14:53:26+00:00</updated>
<author>
<name>Wentao Liang</name>
<email>vulab@iscas.ac.cn</email>
</author>
<published>2026-05-26T10:21:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=427c82497e269579c95ce9142f07e88aa58f2b45'/>
<id>427c82497e269579c95ce9142f07e88aa58f2b45</id>
<content type='text'>
commit 148cd4873115feb266c002d4d4618ea7f14342d9 upstream.

of_partition() calls of_node_get() on the parent device node at the
beginning of the function, storing the reference in 'partitions_np'.
This reference is leaked in two paths:

1. The compatibility check at the top of the function returns 0
   without releasing partitions_np when the node exists but is not
   "fixed-partitions" compatible.

2. The function returns 1 at the end after successfully processing
   all partitions without releasing partitions_np.

Fix both leaks by adding of_node_put(partitions_np) on each path.

Fixes: 2e3a191e89f9 ("block: add support for partition table defined in OF")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang &lt;vulab@iscas.ac.cn&gt;
Reviewed-by: Md Haris Iqbal &lt;haris.iqbal@linux.dev&gt;
Link: https://patch.msgid.link/20260526102124.2283846-1-vulab@iscas.ac.cn
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 148cd4873115feb266c002d4d4618ea7f14342d9 upstream.

of_partition() calls of_node_get() on the parent device node at the
beginning of the function, storing the reference in 'partitions_np'.
This reference is leaked in two paths:

1. The compatibility check at the top of the function returns 0
   without releasing partitions_np when the node exists but is not
   "fixed-partitions" compatible.

2. The function returns 1 at the end after successfully processing
   all partitions without releasing partitions_np.

Fix both leaks by adding of_node_put(partitions_np) on each path.

Fixes: 2e3a191e89f9 ("block: add support for partition table defined in OF")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang &lt;vulab@iscas.ac.cn&gt;
Reviewed-by: Md Haris Iqbal &lt;haris.iqbal@linux.dev&gt;
Link: https://patch.msgid.link/20260526102124.2283846-1-vulab@iscas.ac.cn
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: skip sync_blockdev() on surprise removal in bdev_mark_dead()</title>
<updated>2026-07-18T14:53:25+00:00</updated>
<author>
<name>Chao Shi</name>
<email>coshi036@gmail.com</email>
</author>
<published>2026-05-22T22:00:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9818bcae3c0ca1dde4b9a334125c46676e0a9b29'/>
<id>9818bcae3c0ca1dde4b9a334125c46676e0a9b29</id>
<content type='text'>
commit 49f06cff50a4ccf3b7a1a662ceb892b3b21a527a upstream.

bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no -&gt;mark_dead op)
lost its !surprise guard when the holder -&gt;mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.

syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -&gt; blk_mark_disk_dead() -&gt;
bdev_mark_dead(bdev, true) -&gt; sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.

Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.

Found by FuzzNvme(Syzkaller with FEMU fuzzing framework).

Fixes: d8530de5a6e8 ("block: call into the file system for bdev_mark_dead")
Acked-by: Sungwoo Kim &lt;iam@sung-woo.kim&gt;
Acked-by: Dave Tian &lt;daveti@purdue.edu&gt;
Acked-by: Weidong Zhu &lt;weizhu@fiu.edu&gt;
Signed-off-by: Chao Shi &lt;coshi036@gmail.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260522220025.1770388-1-coshi036@gmail.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 49f06cff50a4ccf3b7a1a662ceb892b3b21a527a upstream.

bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no -&gt;mark_dead op)
lost its !surprise guard when the holder -&gt;mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.

syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -&gt; blk_mark_disk_dead() -&gt;
bdev_mark_dead(bdev, true) -&gt; sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.

Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.

Found by FuzzNvme(Syzkaller with FEMU fuzzing framework).

Fixes: d8530de5a6e8 ("block: call into the file system for bdev_mark_dead")
Acked-by: Sungwoo Kim &lt;iam@sung-woo.kim&gt;
Acked-by: Dave Tian &lt;daveti@purdue.edu&gt;
Acked-by: Weidong Zhu &lt;weizhu@fiu.edu&gt;
Signed-off-by: Chao Shi &lt;coshi036@gmail.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260522220025.1770388-1-coshi036@gmail.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>blk-cgroup: fix UAF in __blkcg_rstat_flush()</title>
<updated>2026-07-04T11:44:19+00:00</updated>
<author>
<name>Michal Koutný</name>
<email>mkoutny@suse.com</email>
</author>
<published>2026-02-05T15:54:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5e5b7f2ef854936e95dceb6a2fdfefcb7152d2c6'/>
<id>5e5b7f2ef854936e95dceb6a2fdfefcb7152d2c6</id>
<content type='text'>
commit 0ab5ee5a1badb58cbb2242617cb01a4972b1f2a2 upstream.

When multiple blkgs in the same blkcg are released concurrently,
a use-after-free can occur. The race happens when one blkg's
__blkcg_rstat_flush() removes another blkg's iostat entries via
llist_del_all(). The second blkg sees an empty list and proceeds
to free itself while the first is still iterating over its entries.

Move the flush from __blkg_release() (RCU callback) to blkg_release()
(before call_rcu). This ensures the RCU grace period waits for any
concurrent flush's rcu_read_lock() section to complete before freeing.

Cc: stable@vger.kernel.org
Cc: Jay Shin &lt;jaeshin@redhat.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Waiman Long &lt;longman@redhat.com&gt;
Fixes: 20cb1c2fb756 ("blk-cgroup: Flush stats before releasing blkcg_gq")
Reported-by: coregee2000@gmail.com
Closes: https://lore.kernel.org/linux-block/CAHPqNmwT9oRpem3J3erS_W0uSQND47LGGSBsNxP8E6uSUish1w@mail.gmail.com/
Signed-off-by: Ming Lei &lt;ming.lei@redhat.com&gt;
Tested-by: Jose Fernandez (Anthropic) &lt;jose.fernandez@linux.dev&gt;
Link: https://patch.msgid.link/20260205155425.342084-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0ab5ee5a1badb58cbb2242617cb01a4972b1f2a2 upstream.

When multiple blkgs in the same blkcg are released concurrently,
a use-after-free can occur. The race happens when one blkg's
__blkcg_rstat_flush() removes another blkg's iostat entries via
llist_del_all(). The second blkg sees an empty list and proceeds
to free itself while the first is still iterating over its entries.

Move the flush from __blkg_release() (RCU callback) to blkg_release()
(before call_rcu). This ensures the RCU grace period waits for any
concurrent flush's rcu_read_lock() section to complete before freeing.

Cc: stable@vger.kernel.org
Cc: Jay Shin &lt;jaeshin@redhat.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Waiman Long &lt;longman@redhat.com&gt;
Fixes: 20cb1c2fb756 ("blk-cgroup: Flush stats before releasing blkcg_gq")
Reported-by: coregee2000@gmail.com
Closes: https://lore.kernel.org/linux-block/CAHPqNmwT9oRpem3J3erS_W0uSQND47LGGSBsNxP8E6uSUish1w@mail.gmail.com/
Signed-off-by: Ming Lei &lt;ming.lei@redhat.com&gt;
Tested-by: Jose Fernandez (Anthropic) &lt;jose.fernandez@linux.dev&gt;
Link: https://patch.msgid.link/20260205155425.342084-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: Avoid mounting the bdev pseudo-filesystem in userspace</title>
<updated>2026-07-04T11:44:19+00:00</updated>
<author>
<name>Denis Arefev</name>
<email>arefev@swemel.ru</email>
</author>
<published>2026-05-21T07:28:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3804e6de30ae7b053d53341d9d6944356cf23b40'/>
<id>3804e6de30ae7b053d53341d9d6944356cf23b40</id>
<content type='text'>
commit f73aa66dffcb8e61e78f01b56163ec16a15d06d2 upstream.

The bdev pseudo-filesystem is an internal kernel filesystem with which
userspace should not interfere. Unregister it so that userspace cannot
even attempt to mount it.

This fixes a bug [1] that occurs when attempting to access files,
because the system call move_mount() uses pointers declared in the
inode_operations structure, which for the bdev pseudo-filesystem
are always equal to 0. `inode-&gt;i_op = &amp;empty_iops;`

[1]

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor instruction fetch in kernel mode
 #PF: error_code(0x0010) - not-present page
 PGD 23380067 P4D 23380067 PUD 23381067 PMD 0
 Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI
 CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
 RIP: 0010:0x0

 Call Trace:
 &lt;TASK&gt;
 lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460
 open_last_lookups fs/namei.c:3550 [inline]
 path_openat+0x953/0x2700 fs/namei.c:3780
 do_filp_open+0x1c5/0x410 fs/namei.c:3810
 do_sys_openat2+0x171/0x4d0 fs/open.c:1318
 do_sys_open fs/open.c:1334 [inline]
 __do_sys_openat fs/open.c:1350 [inline]
 __se_sys_openat fs/open.c:1345 [inline]
 __x64_sys_openat+0x13c/0x1f0 fs/open.c:1345
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/all/20131010004732.GJ13318@ZenIV.linux.org.uk/T/#
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev &lt;arefev@swemel.ru&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260521072857.5078-1-arefev@swemel.ru
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f73aa66dffcb8e61e78f01b56163ec16a15d06d2 upstream.

The bdev pseudo-filesystem is an internal kernel filesystem with which
userspace should not interfere. Unregister it so that userspace cannot
even attempt to mount it.

This fixes a bug [1] that occurs when attempting to access files,
because the system call move_mount() uses pointers declared in the
inode_operations structure, which for the bdev pseudo-filesystem
are always equal to 0. `inode-&gt;i_op = &amp;empty_iops;`

[1]

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor instruction fetch in kernel mode
 #PF: error_code(0x0010) - not-present page
 PGD 23380067 P4D 23380067 PUD 23381067 PMD 0
 Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI
 CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
 RIP: 0010:0x0

 Call Trace:
 &lt;TASK&gt;
 lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460
 open_last_lookups fs/namei.c:3550 [inline]
 path_openat+0x953/0x2700 fs/namei.c:3780
 do_filp_open+0x1c5/0x410 fs/namei.c:3810
 do_sys_openat2+0x171/0x4d0 fs/open.c:1318
 do_sys_open fs/open.c:1334 [inline]
 __do_sys_openat fs/open.c:1350 [inline]
 __se_sys_openat fs/open.c:1345 [inline]
 __x64_sys_openat+0x13c/0x1f0 fs/open.c:1345
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/all/20131010004732.GJ13318@ZenIV.linux.org.uk/T/#
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev &lt;arefev@swemel.ru&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260521072857.5078-1-arefev@swemel.ru
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: fix handling of dead zone write plugs</title>
<updated>2026-06-19T11:44:16+00:00</updated>
<author>
<name>Damien Le Moal</name>
<email>dlemoal@kernel.org</email>
</author>
<published>2026-05-13T11:11:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=36a0faaa4e3d2dc15cf98ac9467542c64ed85b4c'/>
<id>36a0faaa4e3d2dc15cf98ac9467542c64ed85b4c</id>
<content type='text'>
commit 836efd35c472d89c838d7b17ef339ddb3286ffc5 upstream.

Shin'ichiro reported hard to reproduce unaligned write errors with zoned
block devices. Under normal operation conditions (e.g. running XFS on an
SMR disk), these errors are nearly impossible to trigger. But using a
"slow" kernel with many debug options enables and some specific use
cases (e.g. fio zbd test case 46), the errors can be reproduced fairly
easily.

The unaligned write errors come from mishandling a valid reference
counting pattern of zone write plugs. Such pattern triggers for instance
if a process A writes a zone (not necessarilly to the full state),
another process B immediately resets the zone and immediately following
the completion of the zone reset, starts issuing writes to the zone.
With such pattern, in some cases, the zone write plugs worker thread of
the device may still be holding a reference to the zone write plug of
the zone taken when process A was writing to the zone. The following
zone reset from process B marks the zone as dead but does not remove the
zone write plug from the device hash table as a reference to the plug
still exist. Once process B starts issuing new writes, the zone write
plug is seen as dead and the writes from process B are immediately
failed, despite this write pattern being perfectly legal.

Fix this by allowing restoring a dead zone write plug to a live state if
a write is issued to the zone when the zone is: marked as dead, empty
and the write sector corresponds to the first sector of the zone (that
is, the write is aligned to the zone write pointer). This is done with
the new helper function disk_check_zone_wplug_dead(), which restores a
dead zone write plug to a live state by clearing the BLK_ZONE_WPLUG_DEAD
flag and restoring the initial reference to the zone write plug taken
when the plug was added to the device hash table.

Reported-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Fixes: b7d4ffb51037 ("block: fix zone write plug removal")
Signed-off-by: Damien Le Moal &lt;dlemoal@kernel.org&gt;
Tested-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Link: https://patch.msgid.link/20260513111129.108809-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
[ context conflict due to different line offsets in blk-zoned.c ]
Signed-off-by: Gyokhan Kochmarla &lt;gyokhan@amazon.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 836efd35c472d89c838d7b17ef339ddb3286ffc5 upstream.

Shin'ichiro reported hard to reproduce unaligned write errors with zoned
block devices. Under normal operation conditions (e.g. running XFS on an
SMR disk), these errors are nearly impossible to trigger. But using a
"slow" kernel with many debug options enables and some specific use
cases (e.g. fio zbd test case 46), the errors can be reproduced fairly
easily.

The unaligned write errors come from mishandling a valid reference
counting pattern of zone write plugs. Such pattern triggers for instance
if a process A writes a zone (not necessarilly to the full state),
another process B immediately resets the zone and immediately following
the completion of the zone reset, starts issuing writes to the zone.
With such pattern, in some cases, the zone write plugs worker thread of
the device may still be holding a reference to the zone write plug of
the zone taken when process A was writing to the zone. The following
zone reset from process B marks the zone as dead but does not remove the
zone write plug from the device hash table as a reference to the plug
still exist. Once process B starts issuing new writes, the zone write
plug is seen as dead and the writes from process B are immediately
failed, despite this write pattern being perfectly legal.

Fix this by allowing restoring a dead zone write plug to a live state if
a write is issued to the zone when the zone is: marked as dead, empty
and the write sector corresponds to the first sector of the zone (that
is, the write is aligned to the zone write pointer). This is done with
the new helper function disk_check_zone_wplug_dead(), which restores a
dead zone write plug to a live state by clearing the BLK_ZONE_WPLUG_DEAD
flag and restoring the initial reference to the zone write plug taken
when the plug was added to the device hash table.

Reported-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Fixes: b7d4ffb51037 ("block: fix zone write plug removal")
Signed-off-by: Damien Le Moal &lt;dlemoal@kernel.org&gt;
Tested-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Link: https://patch.msgid.link/20260513111129.108809-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
[ context conflict due to different line offsets in blk-zoned.c ]
Signed-off-by: Gyokhan Kochmarla &lt;gyokhan@amazon.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>cgroup/rstat: validate cpu before css_rstat_cpu() access</title>
<updated>2026-06-01T15:51:03+00:00</updated>
<author>
<name>Qing Ming</name>
<email>a0yami@mailbox.org</email>
</author>
<published>2026-05-16T07:08:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6a01413a4e8fcb0263d7bef5075c5f8f4eb3a8b6'/>
<id>6a01413a4e8fcb0263d7bef5075c5f8f4eb3a8b6</id>
<content type='text'>
[ Upstream commit 8817005efbdfdf5d4e4814cb5dc52b53d12917d7 ]

css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.

A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:

  UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
  index 2147483647 is out of range for type 'long unsigned int [64]'
  Call Trace:
    css_rstat_updated
    bpf_iter_run_prog
    cgroup_iter_seq_show
    bpf_seq_read

Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers.

Fixes: a319185be9f5 ("cgroup: bpf: enable bpf programs to integrate with rstat")
Signed-off-by: Qing Ming &lt;a0yami@mailbox.org&gt;
Signed-off-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 8817005efbdfdf5d4e4814cb5dc52b53d12917d7 ]

css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.

A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:

  UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
  index 2147483647 is out of range for type 'long unsigned int [64]'
  Call Trace:
    css_rstat_updated
    bpf_iter_run_prog
    cgroup_iter_seq_show
    bpf_seq_read

Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers.

Fixes: a319185be9f5 ("cgroup: bpf: enable bpf programs to integrate with rstat")
Signed-off-by: Qing Ming &lt;a0yami@mailbox.org&gt;
Signed-off-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()</title>
<updated>2026-06-01T15:50:59+00:00</updated>
<author>
<name>Sungwoo Kim</name>
<email>iam@sung-woo.kim</email>
</author>
<published>2026-05-12T05:09:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=76410790f1491c8e06a451045ae223a61c652455'/>
<id>76410790f1491c8e06a451045ae223a61c652455</id>
<content type='text'>
[ Upstream commit 8582792cf23b3d94674d4d838f7cde9a28d0fcaf ]

pin_user_pages_fast() can partially succeed and return the number of
pages that were actually pinned. However, the bio_integrity_map_user()
does not handle this partial pinning. This leads to a general protection
fault since bvec_from_pages() dereferences an unpinned page address,
which is 0.

To fix this, add a check to verify that all requested memory is pinned.
If partial pinning occurs, unpin the memory and return -EFAULT.

Kernel Oops:

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6

Fixes: 492c5d455969 ("block: bio-integrity: directly map user buffers")
Acked-by: Chao Shi &lt;cshi008@fiu.edu&gt;
Acked-by: Weidong Zhu &lt;weizhu@fiu.edu&gt;
Acked-by: Dave Tian &lt;daveti@purdue.edu&gt;
Signed-off-by: Sungwoo Kim &lt;iam@sung-woo.kim&gt;
Tested-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Link: https://github.com/linux-blktests/blktests/pull/244
Link: https://patch.msgid.link/20260512050929.541397-2-iam@sung-woo.kim
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 8582792cf23b3d94674d4d838f7cde9a28d0fcaf ]

pin_user_pages_fast() can partially succeed and return the number of
pages that were actually pinned. However, the bio_integrity_map_user()
does not handle this partial pinning. This leads to a general protection
fault since bvec_from_pages() dereferences an unpinned page address,
which is 0.

To fix this, add a check to verify that all requested memory is pinned.
If partial pinning occurs, unpin the memory and return -EFAULT.

Kernel Oops:

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6

Fixes: 492c5d455969 ("block: bio-integrity: directly map user buffers")
Acked-by: Chao Shi &lt;cshi008@fiu.edu&gt;
Acked-by: Weidong Zhu &lt;weizhu@fiu.edu&gt;
Acked-by: Dave Tian &lt;daveti@purdue.edu&gt;
Signed-off-by: Sungwoo Kim &lt;iam@sung-woo.kim&gt;
Tested-by: Shin'ichiro Kawasaki &lt;shinichiro.kawasaki@wdc.com&gt;
Link: https://github.com/linux-blktests/blktests/pull/244
Link: https://patch.msgid.link/20260512050929.541397-2-iam@sung-woo.kim
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: recompute nr_integrity_segments in blk_insert_cloned_request</title>
<updated>2026-06-01T15:50:58+00:00</updated>
<author>
<name>Casey Chen</name>
<email>cachen@purestorage.com</email>
</author>
<published>2026-05-11T21:22:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0943f81e1b3176f27dbaf6db268fc69d8a94f0ba'/>
<id>0943f81e1b3176f27dbaf6db268fc69d8a94f0ba</id>
<content type='text'>
[ Upstream commit 2c6e6a18a37b905cb584eb0dda3ae482162a81ca ]

blk_insert_cloned_request() already recomputes nr_phys_segments
against the bottom queue, because "the queue settings related to
segment counting may differ from the original queue." The exact same
reasoning applies to integrity segments: a stacked driver's underlying
queue can have tighter virt_boundary_mask, seg_boundary_mask, or
max_segment_size than the top queue, in which case
blk_rq_count_integrity_sg() against the bottom queue produces a
different count than the cached rq-&gt;nr_integrity_segments inherited
from the source request by blk_rq_prep_clone().

When the cached count is lower than the bottom queue's actual count,
blk_rq_map_integrity_sg() trips

	BUG_ON(segments &gt; rq-&gt;nr_integrity_segments);

on dispatch. The same families of stacked setups that motivated the
existing nr_phys_segments recompute -- dm-multipath fanning out to
nvme-rdma in particular -- can produce this.

Mirror the nr_phys_segments handling: when the request carries
integrity, recompute nr_integrity_segments against the bottom queue
and reject the request if it exceeds the bottom queue's
max_integrity_segments. blk_rq_count_integrity_sg() and
queue_max_integrity_segments() are both already available via
&lt;linux/blk-integrity.h&gt;, which blk-mq.c includes.

This closes a latent gap in the stacking contract and brings the
integrity-segment accounting in line with the existing
phys-segment accounting.

Fixes: 76c313f658d2 ("blk-integrity: improved sg segment mapping")
Signed-off-by: Casey Chen &lt;cachen@purestorage.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260511212230.27511-1-cachen@purestorage.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2c6e6a18a37b905cb584eb0dda3ae482162a81ca ]

blk_insert_cloned_request() already recomputes nr_phys_segments
against the bottom queue, because "the queue settings related to
segment counting may differ from the original queue." The exact same
reasoning applies to integrity segments: a stacked driver's underlying
queue can have tighter virt_boundary_mask, seg_boundary_mask, or
max_segment_size than the top queue, in which case
blk_rq_count_integrity_sg() against the bottom queue produces a
different count than the cached rq-&gt;nr_integrity_segments inherited
from the source request by blk_rq_prep_clone().

When the cached count is lower than the bottom queue's actual count,
blk_rq_map_integrity_sg() trips

	BUG_ON(segments &gt; rq-&gt;nr_integrity_segments);

on dispatch. The same families of stacked setups that motivated the
existing nr_phys_segments recompute -- dm-multipath fanning out to
nvme-rdma in particular -- can produce this.

Mirror the nr_phys_segments handling: when the request carries
integrity, recompute nr_integrity_segments against the bottom queue
and reject the request if it exceeds the bottom queue's
max_integrity_segments. blk_rq_count_integrity_sg() and
queue_max_integrity_segments() are both already available via
&lt;linux/blk-integrity.h&gt;, which blk-mq.c includes.

This closes a latent gap in the stacking contract and brings the
integrity-segment accounting in line with the existing
phys-segment accounting.

Fixes: 76c313f658d2 ("blk-integrity: improved sg segment mapping")
Signed-off-by: Casey Chen &lt;cachen@purestorage.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260511212230.27511-1-cachen@purestorage.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: don't overwrite bip_vcnt in bio_integrity_copy_user()</title>
<updated>2026-06-01T15:50:58+00:00</updated>
<author>
<name>David Carlier</name>
<email>devnexen@gmail.com</email>
</author>
<published>2026-05-11T21:51:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0d48654af4d1390c888389206cc13b51b82c30e6'/>
<id>0d48654af4d1390c888389206cc13b51b82c30e6</id>
<content type='text'>
[ Upstream commit 637ad3a56a3b889527d1dacea6fea2a8bd648140 ]

bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt &lt;= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.

The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER.

Fixes: 3991657ae707 ("block: set bip_vcnt correctly")
Signed-off-by: David Carlier &lt;devnexen@gmail.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260511215151.346228-1-devnexen@gmail.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 637ad3a56a3b889527d1dacea6fea2a8bd648140 ]

bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt &lt;= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.

The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER.

Fixes: 3991657ae707 ("block: set bip_vcnt correctly")
Signed-off-by: David Carlier &lt;devnexen@gmail.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Link: https://patch.msgid.link/20260511215151.346228-1-devnexen@gmail.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
