linux-stable.git/block, branch v4.19.241

block/compat_ioctl: fix range check in BLKGETSIZE

2022-04-27T11:39:45+00:00

commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream.

kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for
large disks.

Reviewed-by: Bart Van Assche 
Signed-off-by: Khazhismel Kumykov 
Reviewed-by: Chaitanya Kulkarni 
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

Revert "Revert "block, bfq: honor already-setup queue merges""

2022-04-15T12:14:54+00:00

[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ]

A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").

So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503

Reported-by: Holger Hoffstätte 
Signed-off-by: Paolo Valente 
Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

bfq: fix use-after-free in bfq_dispatch_request

2022-04-15T12:14:54+00:00

[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ]

KASAN reports a use-after-free report when doing normal scsi-mq test

[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541]  dump_stack+0x9b/0xce
[69832.251232]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243]  print_address_description.constprop.6+0x3e/0x60
[69832.253381]  ? __cpuidle_text_end+0x5/0x5
[69832.254211]  ? vprintk_func+0x6b/0x120
[69832.254994]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914]  kasan_report.cold.9+0x22/0x3a
[69832.257753]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755]  check_memory_region+0x1c1/0x1e0
[69832.260248]  bfq_dispatch_request+0x1045/0x44b0
[69832.261181]  ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032]  ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011]  ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206]  ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147]  ? __switch_to+0x5f4/0xee0
[69832.267898]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840]  blk_mq_run_work_fn+0x51/0x60
[69832.278170]  process_one_work+0x6d4/0xfe0
[69832.278984]  worker_thread+0x91/0xc80
[69832.279726]  ? __kthread_parkme+0xb0/0x110
[69832.280554]  ? process_one_work+0xfe0/0xfe0
[69832.281414]  kthread+0x32d/0x3f0
[69832.282082]  ? kthread_park+0x170/0x170
[69832.282849]  ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599]  kasan_save_stack+0x19/0x40
[69832.285385]  __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350]  kmem_cache_alloc_node+0x13f/0x460
[69832.287237]  bfq_get_queue+0x3d4/0x1140
[69832.287993]  bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015]  bfq_init_rq+0x337/0x2d50
[69832.289749]  bfq_insert_requests+0x304/0x4e10
[69832.290634]  blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629]  blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538]  blk_flush_plug_list+0x2c5/0x480
[69832.293392]  io_schedule_prepare+0xb2/0xd0
[69832.294209]  io_schedule_timeout+0x13/0x80
[69832.295014]  wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137]  submit_bio_wait+0x103/0x1a0
[69832.296932]  blkdev_issue_discard+0xe6/0x160
[69832.297794]  blk_ioctl_discard+0x219/0x290
[69832.298614]  blkdev_common_ioctl+0x50a/0x1750
[69832.304715]  blkdev_ioctl+0x470/0x600
[69832.305474]  block_ioctl+0xde/0x120
[69832.306232]  vfs_ioctl+0x6c/0xc0
[69832.306877]  __se_sys_ioctl+0x90/0xa0
[69832.307629]  do_syscall_64+0x2d/0x40
[69832.308362]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328]  kasan_save_stack+0x19/0x40
[69832.311121]  kasan_set_track+0x1c/0x30
[69832.311868]  kasan_set_free_info+0x1b/0x30
[69832.312699]  __kasan_slab_free+0x111/0x160
[69832.313524]  kmem_cache_free+0x94/0x460
[69832.314367]  bfq_put_queue+0x582/0x940
[69832.315112]  __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275]  bfq_bfqq_expire+0xb27/0x2440
[69832.318084]  bfq_dispatch_request+0x697/0x44b0
[69832.318991]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114]  blk_mq_run_work_fn+0x51/0x60
[69832.323942]  process_one_work+0x6d4/0xfe0
[69832.324772]  worker_thread+0x91/0xc80
[69832.325518]  kthread+0x32d/0x3f0
[69832.326205]  ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297]  which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766]  512-byte region [ffff88802622b968, ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840
[69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926]  ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358]  ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273]                       ^
[69832.363975]  ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960]  ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================

In bfq_dispatch_requestfunction, it may have function call:

bfq_dispatch_request
	__bfq_dispatch_request
		bfq_select_queue
			bfq_bfqq_expire
				__bfq_bfqd_reset_in_service
					bfq_put_queue
						kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the
conditions to free. In the function bfq_dispatch_request, the address
of in_serv_queue pointing to has been released. For getting the value
of idle_timer_disabled, it will get flags value from the address which
in_serv_queue pointing to, then the problem of use-after-free happens;

Fix the problem by check in_serv_queue == bfqd->in_service_queue, to
get the value of idle_timer_disabled if in_serve_queue is equel to
bfqd->in_service_queue. If the space of in_serv_queue pointing has
been released, this judge will aviod use-after-free problem.
And if in_serv_queue may be expired or finished, the idle_timer_disabled
will be false which would not give effects to bfq_update_dispatch_stats.

Reported-by: Hulk Robot 
Signed-off-by: Zhang Wensheng 
Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

block: don't delete queue kobject before its children

2022-04-15T12:14:43+00:00

[ Upstream commit 0f69288253e9fc7c495047720e523b9f1aba5712 ]

kobjects aren't supposed to be deleted before their child kobjects are
deleted.  Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:

    sysfs group 'modes' not found for kobject 'crypto'
    WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
    ...
    Call Trace:
      sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
      __kobject_del+0x20/0x80 lib/kobject.c:611
      kobject_cleanup+0xa4/0x140 lib/kobject.c:696
      kobject_release lib/kobject.c:736 [inline]
      kref_put include/linux/kref.h:65 [inline]
      kobject_put+0x53/0x70 lib/kobject.c:753
      blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
      blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
      del_gendisk+0x117/0x250 block/genhd.c:610

Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place.

Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()")
Reviewed-by: Hannes Reinecke 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Bart Van Assche 
Signed-off-by: Eric Biggers 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

block: don't merge across cgroup boundaries if blkcg is enabled

2022-04-15T12:14:41+00:00

commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream.

blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't
disable merges across different cgroups. This obviously can lead to
accounting and control errors but more importantly to priority inversions -
e.g. an IO which belongs to a higher priority cgroup or IO class may end up
getting throttled incorrectly because it gets merged to an IO issued from a
low priority cgroup.

Fix it by adding blk_cgroup_mergeable() which is called from merge paths and
rejects cross-cgroup and cross-issue_as_root merges.

Signed-off-by: Tejun Heo 
Fixes: d70675121546 ("block: introduce blk-iolatency io controller")
Cc: stable@vger.kernel.org # v4.19+
Cc: Josef Bacik 
Link: https://lore.kernel.org/r/Yi/eE/6zFNyWJ+qd@slm.duckdns.org
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block: Fix fsync always failed if once failed

2022-03-08T18:04:08+00:00

commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream.

We do test with inject error fault base on v4.19, after test some time we found
sync /dev/sda always failed.
[root@localhost] sync /dev/sda
sync: error syncing '/dev/sda': Input/output error

scsi log as follows:
[19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b
[19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0
[19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0)
[19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes
[19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done.
[19069.812564] print_req_error: I/O error, dev sda, sector 0

ftrace log as follows:
 rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep]
 rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep]
 kworker/7:1H-250   [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H]
 -0     [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0]
 -0     [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5]

As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq'
reference count isn't zero. If flush request once failed and record error code
in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync
will always failed.
To address this issue reset 'fq->rq_status' after return error code to upper layer.

Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()")
Signed-off-by: Ye Bin 
Reviewed-by: Ming Lei 
Link: https://lore.kernel.org/r/20211129012659.1553733-1-yebin10@huawei.com
Signed-off-by: Jens Axboe 
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

block/wbt: fix negative inflight counter when remove scsi device

2022-02-23T10:58:40+00:00

commit e92bc4cd34de2ce454bdea8cd198b8067ee4e123 upstream.

Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in
wbt_disable_default() when switch elevator to bfq. And when
we remove scsi device, wbt will be enabled by wbt_enable_default.
If it become false positive between wbt_wait() and wbt_track()
when submit write request.

The following is the scenario that triggered the problem.

T1                          T2                           T3
                            elevator_switch_mq
                            bfq_init_queue
                            wbt_disable_default <= Set
                            rwb->enable_state (OFF)
Submit_bio
blk_mq_make_request
rq_qos_throttle
<= rwb->enable_state (OFF)
                                                         scsi_remove_device
                                                         sd_remove
                                                         del_gendisk
                                                         blk_unregister_queue
                                                         elv_unregister_queue
                                                         wbt_enable_default
                                                         <= Set rwb->enable_state (ON)
q_qos_track
<= rwb->enable_state (ON)
^^^^^^ this request will mark WBT_TRACKED without inflight add and will
lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung.

Fix this by move wbt_enable_default() from elv_unregister to
bfq_exit_queue(). Only re-enable wbt when bfq exit.

Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly")

Remove oneline stale comment, and kill one oneshot local variable.

Signed-off-by: Ming Lei 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/
Signed-off-by: Laibin Qiu 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block: bio-integrity: Advance seed correctly for larger interval sizes

2022-02-08T17:23:14+00:00

commit b13e0c71856817fca67159b11abac350e41289f5 upstream.

Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update
integrity seed") added code to update the integrity seed value when
advancing a bio. However, it failed to take into account that the
integrity interval might be larger than the 512-byte block layer
sector size. This broke bio splitting on PI devices with 4KB logical
blocks.

The seed value should be advanced by bio_integrity_intervals() and not
the number of sectors.

Cc: Dmitry Monakhov 
Cc: stable@vger.kernel.org
Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
Tested-by: Dmitry Ivanov 
Reported-by: Alexey Lyashkov 
Signed-off-by: Martin K. Petersen 
Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block, bfq: fix use after free in bfq_bfqq_expire

2021-12-29T11:20:43+00:00

commit eed47d19d9362bdd958e4ab56af480b9dbf6b2b6 upstream.

The function bfq_bfqq_expire() invokes the function
__bfq_bfqq_expire(), and the latter may free the in-service bfq-queue.
If this happens, then no other instruction of bfq_bfqq_expire() must
be executed, or a use-after-free will occur.

Basing on the assumption that __bfq_bfqq_expire() invokes
bfq_put_queue() on the in-service bfq-queue exactly once, the queue is
assumed to be freed if its refcounter is equal to one right before
invoking __bfq_bfqq_expire().

But, since commit 9dee8b3b057e ("block, bfq: fix queue removal from
weights tree") this assumption is false. __bfq_bfqq_expire() may also
invoke bfq_weights_tree_remove() and, since commit 9dee8b3b057e
("block, bfq: fix queue removal from weights tree"), also
the latter function may invoke bfq_put_queue(). So __bfq_bfqq_expire()
may invoke bfq_put_queue() twice, and this is the actual case where
the in-service queue may happen to be freed.

To address this issue, this commit moves the check on the refcounter
of the queue right around the last bfq_put_queue() that may be invoked
on the queue.

Fixes: 9dee8b3b057e ("block, bfq: fix queue removal from weights tree")
Reported-by: Dmitrii Tcvetkov 
Reported-by: Douglas Anderson 
Tested-by: Dmitrii Tcvetkov 
Tested-by: Douglas Anderson 
Signed-off-by: Paolo Valente 
Signed-off-by: Jens Axboe 
Signed-off-by: Yu Kuai 
Signed-off-by: Greg Kroah-Hartman

block, bfq: fix queue removal from weights tree

2021-12-29T11:20:42+00:00

commit 9dee8b3b057e1da26f85f1842f2aaf3bb200fb94 upstream.

bfq maintains an ordered list, through a red-black tree, of unique
weights of active bfq_queues. This list is used to detect whether there
are active queues with differentiated weights. The weight of a queue is
removed from the list when both the following two conditions become
true:

(1) the bfq_queue is flagged as inactive
(2) the has no in-flight request any longer;

Unfortunately, in the rare cases where condition (2) becomes true before
condition (1), the removal fails, because the function to remove the
weight of the queue (bfq_weights_tree_remove) is rightly invoked in the
path that deactivates the bfq_queue, but mistakenly invoked *before* the
function that actually performs the deactivation (bfq_deactivate_bfqq).

This commits moves the invocation of bfq_weights_tree_remove for
condition (1) to after bfq_deactivate_bfqq. As a consequence of this
move, it is necessary to add a further reference to the queue when the
weight of a queue is added, because the queue might otherwise be freed
before bfq_weights_tree_remove is invoked. This commit adds this
reference and makes all related modifications.

Signed-off-by: Paolo Valente 
Signed-off-by: Jens Axboe 
Signed-off-by: Yu Kuai 
Signed-off-by: Greg Kroah-Hartman