linux-stable.git/block, branch v4.0.4

blk-mq: fix CPU hotplug handling

2015-05-17T16:55:07+00:00

commit 2a34c0872adf252f23a6fef2d051a169ac796cef upstream.

hctx->tags has to be set as NULL in case that it is to be unmapped
no matter if set->tags[hctx->queue_num] is NULL or not in blk_mq_map_swqueue()
because shared tags can be freed already from another request queue.

The same situation has to be considered during handling CPU online too.
Unmapped hw queue can be remapped after CPU topo is changed, so we need
to allocate tags for the hw queue in blk_mq_map_swqueue(). Then tags
allocation for hw queue can be removed in hctx cpu online notifier, and it
is reasonable to do that after mapping is updated.

Reported-by: Dongsu Park 
Tested-by: Dongsu Park 
Signed-off-by: Ming Lei 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

blk-mq: fix race between timeout and CPU hotplug

2015-05-17T16:55:07+00:00

commit f054b56c951bf1731ba7314a4c7f1cc0b2977cc9 upstream.

Firstly during CPU hotplug, even queue is freezed, timeout
handler still may come and access hctx->tags, which may cause
use after free, so this patch deactivates timeout handler
inside CPU hotplug notifier.

Secondly, tags can be shared by more than one queues, so we
have to check if the hctx has been unmapped, otherwise
still use-after-free on tags can be triggered.

Reported-by: Dongsu Park 
Tested-by: Dongsu Park 
Signed-off-by: Ming Lei 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block: destroy bdi before blockdev is unregistered.

2015-05-17T16:55:07+00:00

commit 6cd18e711dd8075da9d78cfc1239f912ff28968a upstream.

Because of the peculiar way that md devices are created (automatically
when the device node is opened), a new device can be created and
registered immediately after the
	blk_unregister_region(disk_devt(disk), disk->minors);
call in del_gendisk().

Therefore it is important that all visible artifacts of the previous
device are removed before this call.  In particular, the 'bdi'.

Since:
commit c4db59d31e39ea067c32163ac961e9c80198fd37
Author: Christoph Hellwig 
    fs: don't reassign dirty inodes to default_backing_dev_info

moved the
   device_unregister(bdi->dev);
call from bdi_unregister() to bdi_destroy() it has been quite easy to
lose a race and have a new (e.g.) "md127" be created after the
blk_unregister_region() call and before bdi_destroy() is ultimately
called by the final 'put_disk', which must come after del_gendisk().

The new device finds that the bdi name is already registered in sysfs
and complains

> [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70()
> [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127'

We can fix this by moving the bdi_destroy() call out of
blk_release_queue() (which can happen very late when a refcount
reaches zero) and into blk_cleanup_queue() - which happens exactly when the md
device driver calls it.

Then it is only necessary for md to call blk_cleanup_queue() before
del_gendisk().  As loop.c devices are also created on demand by
opening the device node, we make the same change there.

Fixes: c4db59d31e39ea067c32163ac961e9c80198fd37
Reported-by: Azat Khuzhin 
Cc: Christoph Hellwig 
Signed-off-by: NeilBrown 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

blk-mq: initialize 'struct request' and associated data to zero

2015-04-11T20:42:16+00:00

Jan Engelhardt reports a strange oops with an invalid ->sense_buffer
pointer in scsi_init_cmd_errh() with the blk-mq code.

The sense_buffer pointer should have been initialized by the call to
scsi_init_request() from blk_mq_init_rq_map(), but there seems to be
some non-repeatable memory corruptor.

This patch makes sure we initialize the whole struct request allocation
(and the associated 'struct scsi_cmnd' for the SCSI case) to zero, by
using __GFP_ZERO in the allocation.  The old code initialized a couple
of individual fields, leaving the rest undefined (although many of them
are then initialized in later phases, like blk_mq_rq_ctx_init() etc.

It's not entirely clear why this matters, but it's the rigth thing to do
regardless, and with 4.0 imminent this is the defensive "let's just make
sure everything is initialized properly" patch.

Tested-by: Jan Engelhardt 
Acked-by: Jens Axboe 
Signed-off-by: Linus Torvalds

block: fix blk_stack_limits() regression due to lcm() change

2015-03-31T15:45:50+00:00

Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n")
caused blk_stack_limits() to not properly stack queue_limits for stacked
devices (e.g. DM).

Fix this regression by establishing lcm_not_zero() and switching
blk_stack_limits() over to using it.

DM uses blk_set_stacking_limits() to establish the initial top-level
queue_limits that are then built up based on underlying devices' limits
using blk_stack_limits().  In the case of optimal_io_size (io_opt)
blk_set_stacking_limits() establishes a default value of 0.  With commit
69c953c, lcm(0, n) is no longer n, which compromises proper stacking of
the underlying devices' io_opt.

Test:
$ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536
$ cat /sys/block/sde/queue/optimal_io_size
786432
$ dmsetup create node --table "0 100 linear /dev/sde 0"

Before this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
0

After this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
786432

Signed-off-by: Mike Snitzer 
Cc: stable@vger.kernel.org # 3.19+
Acked-by: Martin K. Petersen 
Signed-off-by: Jens Axboe

Fix bug in blk_rq_merge_ok

2015-03-20T14:50:41+00:00

Use the right array index to reference the last
element of rq->biotail->bi_io_vec[]

Signed-off-by: Wenbo Wang 
Reviewed-by: Chong Yuan 
Fixes: 66cb45aa41315 ("block: add support for limiting gaps in SG lists")
Cc: stable@kernel.org
Signed-off-by: Jens Axboe

blkmq: Fix NULL pointer deref when all reserved tags in

2015-03-18T23:06:18+00:00

When allocating from the reserved tags pool, bt_get() is called with
a NULL hctx.  If all tags are in use, the hw queue is kicked to push
out any pending IO, potentially freeing tags, and tag allocation is
retried.  The problem is that blk_mq_run_hw_queue() doesn't check for
a NULL hctx.  So we avoid it with a simple NULL hctx test.

Tested by hammering mtip32xx with concurrent smartctl/hdparm.

Signed-off-by: Sam Bradshaw 
Signed-off-by: Selvan Mani 
Fixes: b32232073e80 ("blk-mq: fix hang in bt_get()")
Cc: stable@kernel.org

Added appropriate comment.

Signed-off-by: Jens Axboe

blk-mq: fix use of incorrect goto label in blk_mq_init_queue error path

2015-03-13T14:22:32+00:00

If percpu_ref_init() fails the allocated q and hctxs must get cleaned
up; using 'err_map' doesn't allow that to happen.

Signed-off-by: Mike Snitzer 
Reviewed-by: Ming Lei 
Cc: stable@kernel.org
Signed-off-by: Jens Axboe

blk-throttle: check stats_cpu before reading it from sysfs

2015-02-21T06:11:58+00:00

When reading blkio.throttle.io_serviced in a recently created blkio
cgroup, it's possible to race against the creation of a throttle policy,
which delays the allocation of stats_cpu.

Like other functions in the throttle code, just checking for a NULL
stats_cpu prevents the following oops caused by that race.

[ 1117.285199] Unable to handle kernel paging request for data at address 0x7fb4d0020
[ 1117.285252] Faulting instruction address: 0xc0000000003efa2c
[ 1137.733921] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1137.733945] SMP NR_CPUS=2048 NUMA PowerNV
[ 1137.734025] Modules linked in: bridge stp llc kvm_hv kvm binfmt_misc autofs4
[ 1137.734102] CPU: 3 PID: 5302 Comm: blkcgroup Not tainted 3.19.0 #5
[ 1137.734132] task: c000000f1d188b00 ti: c000000f1d210000 task.ti: c000000f1d210000
[ 1137.734167] NIP: c0000000003efa2c LR: c0000000003ef9f0 CTR: c0000000003ef980
[ 1137.734202] REGS: c000000f1d213500 TRAP: 0300   Not tainted  (3.19.0)
[ 1137.734230] MSR: 9000000000009032   CR: 42008884  XER: 20000000
[ 1137.734325] CFAR: 0000000000008458 DAR: 00000007fb4d0020 DSISR: 40000000 SOFTE: 0
GPR00: c0000000003ed3a0 c000000f1d213780 c000000000c59538 0000000000000000
GPR04: 0000000000000800 0000000000000000 0000000000000000 0000000000000000
GPR08: ffffffffffffffff 00000007fb4d0020 00000007fb4d0000 c000000000780808
GPR12: 0000000022000888 c00000000fdc0d80 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 000001003e120200 c000000f1d5b0cc0 0000000000000200 0000000000000000
GPR24: 0000000000000001 c000000000c269e0 0000000000000020 c000000f1d5b0c80
GPR28: c000000000ca3a08 c000000000ca3dec c000000f1c667e00 c000000f1d213850
[ 1137.734886] NIP [c0000000003efa2c] .tg_prfill_cpu_rwstat+0xac/0x180
[ 1137.734915] LR [c0000000003ef9f0] .tg_prfill_cpu_rwstat+0x70/0x180
[ 1137.734943] Call Trace:
[ 1137.734952] [c000000f1d213780] [d000000005560520] 0xd000000005560520 (unreliable)
[ 1137.734996] [c000000f1d2138a0] [c0000000003ed3a0] .blkcg_print_blkgs+0xe0/0x1a0
[ 1137.735039] [c000000f1d213960] [c0000000003efb50] .tg_print_cpu_rwstat+0x50/0x70
[ 1137.735082] [c000000f1d2139e0] [c000000000104b48] .cgroup_seqfile_show+0x58/0x150
[ 1137.735125] [c000000f1d213a70] [c0000000002749dc] .kernfs_seq_show+0x3c/0x50
[ 1137.735161] [c000000f1d213ae0] [c000000000218630] .seq_read+0xe0/0x510
[ 1137.735197] [c000000f1d213bd0] [c000000000275b04] .kernfs_fop_read+0x164/0x200
[ 1137.735240] [c000000f1d213c80] [c0000000001eb8e0] .__vfs_read+0x30/0x80
[ 1137.735276] [c000000f1d213cf0] [c0000000001eb9c4] .vfs_read+0x94/0x1b0
[ 1137.735312] [c000000f1d213d90] [c0000000001ebb38] .SyS_read+0x58/0x100
[ 1137.735349] [c000000f1d213e30] [c000000000009218] syscall_exit+0x0/0x98
[ 1137.735383] Instruction dump:
[ 1137.735405] 7c6307b4 7f891800 409d00b8 60000000 60420000 3d420004 392a63b0 786a1f24
[ 1137.735471] 7d49502a e93e01c8 7d495214 7d2ad214 <7cead02a> e9090008 e9490010 e9290018

And here is one code that allows to easily reproduce this, although this
has first been found by running docker.

void run(pid_t pid)
{
	int n;
	int status;
	int fd;
	char *buffer;
	buffer = memalign(BUFFER_ALIGN, BUFFER_SIZE);
	n = snprintf(buffer, BUFFER_SIZE, "%d\n", pid);
	fd = open(CGPATH "/test/tasks", O_WRONLY);
	write(fd, buffer, n);
	close(fd);
	if (fork() > 0) {
		fd = open("/dev/sda", O_RDONLY | O_DIRECT);
		read(fd, buffer, 512);
		close(fd);
		wait(&status);
	} else {
		fd = open(CGPATH "/test/blkio.throttle.io_serviced", O_RDONLY);
		n = read(fd, buffer, BUFFER_SIZE);
		close(fd);
	}
	free(buffer);
	exit(0);
}

void test(void)
{
	int status;
	mkdir(CGPATH "/test", 0666);
	if (fork() > 0)
		wait(&status);
	else
		run(getpid());
	rmdir(CGPATH "/test");
}

int main(int argc, char **argv)
{
	int i;
	for (i = 0; i < NR_TESTS; i++)
		test();
	return 0;
}

Reported-by: Ricardo Marin Matinata 
Signed-off-by: Thadeu Lima de Souza Cascardo 
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe

Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-block

2015-02-12T22:30:53+00:00

Pull block driver changes from Jens Axboe:
 "This contains:

   - The 4k/partition fixes for brd from Boaz/Matthew.

   - A few xen front/back block fixes from David Vrabel and Roger Pau
     Monne.

   - Floppy changes from Takashi, cleaning the device file creation.

   - Switching libata to use the new blk-mq tagging policy, removing
     code (and a suboptimal implementation) from libata.  This will
     throw you a merge conflict, since a bug in the original libata
     tagging code was fixed since this code was branched.  Trivial.
     From Shaohua.

   - Conversion of loop to blk-mq, from Ming Lei.

   - Cleanup of the io_schedule() handling in bsg from Peter Zijlstra.
     He claims it improves on unreadable code, which will cost him a
     beer.

   - Maintainer update or NDB, now handled by Markus Pargmann.

   - NVMe:
        - Optimization from me that avoids a kmalloc/kfree per IO for
          smaller (<= 8KB) IO. This cuts about 1% of high IOPS CPU
          overhead.
        - Removal of (now) dead RCU code, a relic from before NVMe was
          converted to blk-mq"

* 'for-3.20/drivers' of git://git.kernel.dk/linux-block:
  xen-blkback: default to X86_32 ABI on x86
  xen-blkfront: fix accounting of reqs when migrating
  xen-blkback,xen-blkfront: add myself as maintainer
  block: Simplify bsg complete all
  floppy: Avoid manual call of device_create_file()
  NVMe: avoid kmalloc/kfree for smaller IO
  MAINTAINERS: Update NBD maintainer
  libata: make sata_sil24 use fifo tag allocator
  libata: move sas ata tag allocation to libata-scsi.c
  libata: use blk taging
  NVMe: within nvme_free_queues(), delete RCU sychro/deferred free
  null_blk: suppress invalid partition info
  brd: Request from fdisk 4k alignment
  brd: Fix all partitions BUGs
  axonram: Fix bug in direct_access
  loop: add blk-mq.h include
  block: loop: don't handle REQ_FUA explicitly
  block: loop: introduce lo_discard() and lo_req_flush()
  block: loop: say goodby to bio
  block: loop: improve performance via blk-mq