linux-stable.git/arch, branch v5.9.2 Linux kernel stable tree x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR 2020-10-29T09:12:11+00:00 Borislav Petkov bp@suse.de 2020-09-06T21:02:52+00:00 9a0dc5e66c30c6039bc4bd15c486455448ab41f5 [ Upstream commit e2def7d49d0812ea40a224161b2001b2e815dce2 ] If an exception needs to be handled while reading an MSR - which is in most of the cases caused by a #GP on a non-existent MSR - then this is most likely the incarnation of a BIOS or a hardware bug. Such bug violates the architectural guarantee that MCA banks are present with all MSRs belonging to them. The proper fix belongs in the hardware/firmware - not in the kernel. Handling an #MC exception which is raised while an NMI is being handled would cause the nasty NMI nesting issue because of the shortcoming of IRET of reenabling NMIs when executed. And the machine is in an #MC context already so <Deity> be at its side. Tracing MSR accesses while in #MC is another no-no due to tracing being inherently a bad idea in atomic context: vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section so remove all that "additional" functionality from mce_rdmsrl() and provide it with a special exception handler which panics the machine when that MSR is not accessible. The exception handler prints a human-readable message explaining what the panic reason is but, what is more, it panics while in the #GP handler and latter won't have executed an IRET, thus opening the NMI nesting issue in the case when the #MC has happened while handling an NMI. (#MC itself won't be reenabled until MCG_STATUS hasn't been cleared). Suggested-by: Andy Lutomirski <luto@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> [ Add missing prototypes for ex_handler_* ] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200906212130.GA28456@zn.tnic Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e2def7d49d0812ea40a224161b2001b2e815dce2 ]

If an exception needs to be handled while reading an MSR - which is in
most of the cases caused by a #GP on a non-existent MSR - then this
is most likely the incarnation of a BIOS or a hardware bug. Such bug
violates the architectural guarantee that MCA banks are present with all
MSRs belonging to them.

The proper fix belongs in the hardware/firmware - not in the kernel.

Handling an #MC exception which is raised while an NMI is being handled
would cause the nasty NMI nesting issue because of the shortcoming of
IRET of reenabling NMIs when executed. And the machine is in an #MC
context already so <Deity> be at its side.

Tracing MSR accesses while in #MC is another no-no due to tracing being
inherently a bad idea in atomic context:

  vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section

so remove all that "additional" functionality from mce_rdmsrl() and
provide it with a special exception handler which panics the machine
when that MSR is not accessible.

The exception handler prints a human-readable message explaining what
the panic reason is but, what is more, it panics while in the #GP
handler and latter won't have executed an IRET, thus opening the NMI
nesting issue in the case when the #MC has happened while handling
an NMI. (#MC itself won't be reenabled until MCG_STATUS hasn't been
cleared).

Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
[ Add missing prototypes for ex_handler_* ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200906212130.GA28456@zn.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/mce: Annotate mce_rd/wrmsrl() with noinstr 2020-10-29T09:12:10+00:00 Borislav Petkov bp@suse.de 2020-09-14T17:21:28+00:00 88b7969b252eb839d2ef55398adc5e6869b92038 [ Upstream commit e100777016fdf6ec3a9d7c1773b15a2b5eca6c55 ] They do get called from the #MC handler which is already marked "noinstr". Commit e2def7d49d08 ("x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR") already got rid of the instrumentation in the MSR accessors, fix the annotation now too, in order to get rid of: vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200915194020.28807-1-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e100777016fdf6ec3a9d7c1773b15a2b5eca6c55 ]

They do get called from the #MC handler which is already marked
"noinstr".

Commit

  e2def7d49d08 ("x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR")

already got rid of the instrumentation in the MSR accessors, fix the
annotation now too, in order to get rid of:

  vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200915194020.28807-1-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/mce: Add Skylake quirk for patrol scrub reported errors 2020-10-29T09:12:08+00:00 Borislav Petkov bp@suse.de 2020-09-30T02:13:12+00:00 4286dc105f25976de214869670e831901cee29d8 [ Upstream commit fd258dc4442c5c1c069c6b5b42bfe7d10cddda95 ] The patrol scrubber in Skylake and Cascade Lake systems can be configured to report uncorrected errors using a special signature in the machine check bank and to signal using CMCI instead of machine check. Update the severity calculation mechanism to allow specifying the model, minimum stepping and range of machine check bank numbers. Add a new rule to detect the special signature (on model 0x55, stepping >=4 in any of the memory controller banks). [ bp: Rewrite it. aegl: Productize it. ] Suggested-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200930021313.31810-2-tony.luck@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fd258dc4442c5c1c069c6b5b42bfe7d10cddda95 ]

The patrol scrubber in Skylake and Cascade Lake systems can be configured
to report uncorrected errors using a special signature in the machine
check bank and to signal using CMCI instead of machine check.

Update the severity calculation mechanism to allow specifying the model,
minimum stepping and range of machine check bank numbers.

Add a new rule to detect the special signature (on model 0x55, stepping
>=4 in any of the memory controller banks).

 [ bp: Rewrite it.
   aegl: Productize it. ]

Suggested-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200930021313.31810-2-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/asm: Replace __force_order with a memory clobber 2020-10-29T09:12:08+00:00 Arvind Sankar nivedita@alum.mit.edu 2020-09-02T23:21:52+00:00 0f1f0d3b9efaac249d2d097a33c8d438795a5529 [ Upstream commit aa5cacdc29d76a005cbbee018a47faa6e724dd2d ] The CRn accessor functions use __force_order as a dummy operand to prevent the compiler from reordering CRn reads/writes with respect to each other. The fact that the asm is volatile should be enough to prevent this: volatile asm statements should be executed in program order. However GCC 4.9.x and 5.x have a bug that might result in reordering. This was fixed in 8.1, 7.3 and 6.5. Versions prior to these, including 5.x and 4.9.x, may reorder volatile asm statements with respect to each other. There are some issues with __force_order as implemented: - It is used only as an input operand for the write functions, and hence doesn't do anything additional to prevent reordering writes. - It allows memory accesses to be cached/reordered across write functions, but CRn writes affect the semantics of memory accesses, so this could be dangerous. - __force_order is not actually defined in the kernel proper, but the LLVM toolchain can in some cases require a definition: LLVM (as well as GCC 4.9) requires it for PIE code, which is why the compressed kernel has a definition, but also the clang integrated assembler may consider the address of __force_order to be significant, resulting in a reference that requires a definition. Fix this by: - Using a memory clobber for the write functions to additionally prevent caching/reordering memory accesses across CRn writes. - Using a dummy input operand with an arbitrary constant address for the read functions, instead of a global variable. This will prevent reads from being reordered across writes, while allowing memory loads to be cached/reordered across CRn reads, which should be safe. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602 Link: https://lore.kernel.org/lkml/20200527135329.1172644-1-arnd@arndb.de/ Link: https://lkml.kernel.org/r/20200902232152.3709896-1-nivedita@alum.mit.edu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aa5cacdc29d76a005cbbee018a47faa6e724dd2d ]

The CRn accessor functions use __force_order as a dummy operand to
prevent the compiler from reordering CRn reads/writes with respect to
each other.

The fact that the asm is volatile should be enough to prevent this:
volatile asm statements should be executed in program order. However GCC
4.9.x and 5.x have a bug that might result in reordering. This was fixed
in 8.1, 7.3 and 6.5. Versions prior to these, including 5.x and 4.9.x,
may reorder volatile asm statements with respect to each other.

There are some issues with __force_order as implemented:
- It is used only as an input operand for the write functions, and hence
  doesn't do anything additional to prevent reordering writes.
- It allows memory accesses to be cached/reordered across write
  functions, but CRn writes affect the semantics of memory accesses, so
  this could be dangerous.
- __force_order is not actually defined in the kernel proper, but the
  LLVM toolchain can in some cases require a definition: LLVM (as well
  as GCC 4.9) requires it for PIE code, which is why the compressed
  kernel has a definition, but also the clang integrated assembler may
  consider the address of __force_order to be significant, resulting in
  a reference that requires a definition.

Fix this by:
- Using a memory clobber for the write functions to additionally prevent
  caching/reordering memory accesses across CRn writes.
- Using a dummy input operand with an arbitrary constant address for the
  read functions, instead of a global variable. This will prevent reads
  from being reordered across writes, while allowing memory loads to be
  cached/reordered across CRn reads, which should be safe.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602
Link: https://lore.kernel.org/lkml/20200527135329.1172644-1-arnd@arndb.de/
Link: https://lkml.kernel.org/r/20200902232152.3709896-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/dumpstack: Fix misleading instruction pointer error message 2020-10-29T09:12:08+00:00 Mark Mossberg mark.mossberg@gmail.com 2020-10-02T04:29:16+00:00 46c53c22182e2527afbaf65fe251866b60f11c8a [ Upstream commit 238c91115cd05c71447ea071624a4c9fe661f970 ] Printing "Bad RIP value" if copy_code() fails can be misleading for userspace pointers, since copy_code() can fail if the instruction pointer is valid but the code is paged out. This is because copy_code() calls copy_from_user_nmi() for userspace pointers, which disables page fault handling. This is reproducible in OOM situations, where it's plausible that the code may be reclaimed in the time between entry into the kernel and when this message is printed. This leaves a misleading log in dmesg that suggests instruction pointer corruption has occurred, which may alarm users. Change the message to state the error condition more precisely. [ bp: Massage a bit. ] Signed-off-by: Mark Mossberg <mark.mossberg@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201002042915.403558-1-mark.mossberg@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 238c91115cd05c71447ea071624a4c9fe661f970 ]

Printing "Bad RIP value" if copy_code() fails can be misleading for
userspace pointers, since copy_code() can fail if the instruction
pointer is valid but the code is paged out. This is because copy_code()
calls copy_from_user_nmi() for userspace pointers, which disables page
fault handling.

This is reproducible in OOM situations, where it's plausible that the
code may be reclaimed in the time between entry into the kernel and when
this message is printed. This leaves a misleading log in dmesg that
suggests instruction pointer corruption has occurred, which may alarm
users.

Change the message to state the error condition more precisely.

 [ bp: Massage a bit. ]

Signed-off-by: Mark Mossberg <mark.mossberg@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201002042915.403558-1-mark.mossberg@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
KVM: ioapic: break infinite recursion on lazy EOI 2020-10-29T09:12:07+00:00 Vitaly Kuznetsov vkuznets@redhat.com 2020-10-24T08:13:24+00:00 293c420c1af6355ccb53d816146f5455909e26b9 [ Upstream commit 77377064c3a94911339f13ce113b3abf265e06da ] During shutdown the IOAPIC trigger mode is reset to edge triggered while the vfio-pci INTx is still registered with a resampler. This allows us to get into an infinite loop: ioapic_set_irq -> ioapic_lazy_update_eoi -> kvm_ioapic_update_eoi_one -> kvm_notify_acked_irq -> kvm_notify_acked_gsi -> (via irq_acked fn ptr) irqfd_resampler_ack -> kvm_set_irq -> (via set fn ptr) kvm_set_ioapic_irq -> kvm_ioapic_set_irq -> ioapic_set_irq Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts", 2020-05-04) acknowledges that this recursion loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi, but at this point the scenario is already set, we have an edge interrupt with resampler on the same gsi. Fortunately, the only user of irq ack notifiers (in addition to resamplefd) is i8254 timer interrupt reinjection. These are edge-triggered, so in principle they would need the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't need the lazy EOI behavior. Therefore, remove the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi. This fixes CVE-2020-27152. Note that this issue cannot happen with SR-IOV assigned devices because virtual functions do not have INTx, only MSI. Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI") Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 77377064c3a94911339f13ce113b3abf265e06da ]

During shutdown the IOAPIC trigger mode is reset to edge triggered
while the vfio-pci INTx is still registered with a resampler.
This allows us to get into an infinite loop:

ioapic_set_irq
  -> ioapic_lazy_update_eoi
  -> kvm_ioapic_update_eoi_one
  -> kvm_notify_acked_irq
  -> kvm_notify_acked_gsi
  -> (via irq_acked fn ptr) irqfd_resampler_ack
  -> kvm_set_irq
  -> (via set fn ptr) kvm_set_ioapic_irq
  -> kvm_ioapic_set_irq
  -> ioapic_set_irq

Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to
edge-triggered interrupts", 2020-05-04) acknowledges that this recursion
loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi,
but at this point the scenario is already set, we have an edge interrupt
with resampler on the same gsi.

Fortunately, the only user of irq ack notifiers (in addition to resamplefd)
is i8254 timer interrupt reinjection.  These are edge-triggered, so in
principle they would need the call to kvm_ioapic_update_eoi_one from
ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't
need the lazy EOI behavior.  Therefore, remove the call to
kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi.

This fixes CVE-2020-27152.  Note that this issue cannot happen with
SR-IOV assigned devices because virtual functions do not have INTx,
only MSI.

Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/pseries: Avoid using addr_to_pfn in real mode 2020-10-29T09:12:06+00:00 Ganesh Goudar ganeshgr@linux.ibm.com 2020-07-24T06:39:46+00:00 ae04a238f748906270ede9228304528d7d730895 [ Upstream commit 4ff753feab021242144818b9a3ba011238218145 ] When an UE or memory error exception is encountered the MCE handler tries to find the pfn using addr_to_pfn() which takes effective address as an argument, later pfn is used to poison the page where memory error occurred, recent rework in this area made addr_to_pfn to run in real mode, which can be fatal as it may try to access memory outside RMO region. Have two helper functions to separate things to be done in real mode and virtual mode without changing any functionality. This also fixes the following error as the use of addr_to_pfn is now moved to virtual mode. Without this change following kernel crash is seen on hitting UE. [ 485.128036] Oops: Kernel access of bad area, sig: 11 [#1] [ 485.128040] LE SMP NR_CPUS=2048 NUMA pSeries [ 485.128047] Modules linked in: [ 485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22 [ 485.128074] NIP: c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0 [ 485.128078] REGS: c000000003f1f970 TRAP: 0300 Tainted: G OE (5.7.0) [ 485.128082] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008284 XER: 00000001 [ 485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1 [ 485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000 [ 485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022 [ 485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14 [ 485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000 [ 485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100 [ 485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50 [ 485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a [ 485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a [ 485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310 [ 485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170 [ 485.128133] Call Trace: [ 485.128135] Instruction dump: [ 485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff [ 485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040 [ 485.128152] ---[ end trace d34b27e29ae0e340 ]--- Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code") Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724063946.21378-1-ganeshgr@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4ff753feab021242144818b9a3ba011238218145 ]

When an UE or memory error exception is encountered the MCE handler
tries to find the pfn using addr_to_pfn() which takes effective
address as an argument, later pfn is used to poison the page where
memory error occurred, recent rework in this area made addr_to_pfn
to run in real mode, which can be fatal as it may try to access
memory outside RMO region.

Have two helper functions to separate things to be done in real mode
and virtual mode without changing any functionality. This also fixes
the following error as the use of addr_to_pfn is now moved to virtual
mode.

Without this change following kernel crash is seen on hitting UE.

[  485.128036] Oops: Kernel access of bad area, sig: 11 [#1]
[  485.128040] LE SMP NR_CPUS=2048 NUMA pSeries
[  485.128047] Modules linked in:
[  485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22
[  485.128074] NIP:  c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0
[  485.128078] REGS: c000000003f1f970 TRAP: 0300   Tainted: G OE (5.7.0)
[  485.128082] MSR:  8000000000001003 <SF,ME,RI,LE>  CR: 28008284  XER: 00000001
[  485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1
[  485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000
[  485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022
[  485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14
[  485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000
[  485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100
[  485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50
[  485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a
[  485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a
[  485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310
[  485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170
[  485.128133] Call Trace:
[  485.128135] Instruction dump:
[  485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff
[  485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040
[  485.128152] ---[ end trace d34b27e29ae0e340 ]---

Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code")
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724063946.21378-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/64s: Remove TM from Power10 features 2020-10-29T09:12:06+00:00 Jordan Niethe jniethe5@gmail.com 2020-08-27T03:55:29+00:00 30c28960c40b29f5c21fca40c648f9a7b91003d0 [ Upstream commit ec613a57fa1d57381f890c3166175fe68cf43f12 ] ISA v3.1 removes transactional memory and hence it should not be present in cpu_features or cpu_user_features2. Remove CPU_FTR_TM_COMP from CPU_FTRS_POWER10. Remove PPC_FEATURE2_HTM_COMP and PPC_FEATURE2_HTM_NOSC_COMP from COMMON_USER2_POWER10. Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200827035529.900-1-jniethe5@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ec613a57fa1d57381f890c3166175fe68cf43f12 ]

ISA v3.1 removes transactional memory and hence it should not be present
in cpu_features or cpu_user_features2. Remove CPU_FTR_TM_COMP from
CPU_FTRS_POWER10. Remove PPC_FEATURE2_HTM_COMP and
PPC_FEATURE2_HTM_NOSC_COMP from COMMON_USER2_POWER10.

Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200827035529.900-1-jniethe5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/powernv/dump: Fix race while processing OPAL dump 2020-10-29T09:12:06+00:00 Vasant Hegde hegdevasant@linux.vnet.ibm.com 2020-10-17T16:42:10+00:00 b6a49c2768a9ad57cc91d6c985cef887d25b855b [ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ] Every dump reported by OPAL is exported to userspace through a sysfs interface and notified using kobject_uevent(). The userspace daemon (opal_errd) then reads the dump and acknowledges that the dump is saved safely to disk. Once acknowledged the kernel removes the respective sysfs file entry causing respective resources to be released including kobject. However it's possible the userspace daemon may already be scanning dump entries when a new sysfs dump entry is created by the kernel. User daemon may read this new entry and ack it even before kernel can notify userspace about it through kobject_uevent() call. If that happens then we have a potential race between dump_ack_store->kobject_put() and kobject_uevent which can lead to use-after-free of a kernfs object resulting in a kernel crash. This patch fixes this race by protecting the sysfs file creation/notification by holding a reference count on kobject until we safely send kobject_uevent(). The function create_dump_obj() returns the dump object which if used by caller function will end up in use-after-free problem again. However, the return value of create_dump_obj() function isn't being used today and there is no need as well. Hence change it to return void to make this fix complete. Fixes: c7e64b9ce04a ("powerpc/powernv Platform dump interface") Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201017164210.264619-1-hegdevasant@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ]

Every dump reported by OPAL is exported to userspace through a sysfs
interface and notified using kobject_uevent(). The userspace daemon
(opal_errd) then reads the dump and acknowledges that the dump is
saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.

However it's possible the userspace daemon may already be scanning
dump entries when a new sysfs dump entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
dump_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash.

This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().

The function create_dump_obj() returns the dump object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_dump_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.

Fixes: c7e64b9ce04a ("powerpc/powernv Platform dump interface")
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201017164210.264619-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node 2020-10-29T09:12:06+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2020-08-15T18:19:57+00:00 3c967d12eb96eefad5936818ce52f2556ae8147a [ Upstream commit 737e7610b545cc901a9696083c1824a7104b8d1b ] The 3.10 vendor kernel defines the following GPU 20 interrupt lines: #define INT_MALI_GP AM_IRQ(160) #define INT_MALI_GP_MMU AM_IRQ(161) #define INT_MALI_PP AM_IRQ(162) #define INT_MALI_PMU AM_IRQ(163) #define INT_MALI_PP0 AM_IRQ(164) #define INT_MALI_PP0_MMU AM_IRQ(165) #define INT_MALI_PP1 AM_IRQ(166) #define INT_MALI_PP1_MMU AM_IRQ(167) #define INT_MALI_PP2 AM_IRQ(168) #define INT_MALI_PP2_MMU AM_IRQ(169) #define INT_MALI_PP3 AM_IRQ(170) #define INT_MALI_PP3_MMU AM_IRQ(171) #define INT_MALI_PP4 AM_IRQ(172) #define INT_MALI_PP4_MMU AM_IRQ(173) #define INT_MALI_PP5 AM_IRQ(174) #define INT_MALI_PP5_MMU AM_IRQ(175) #define INT_MALI_PP6 AM_IRQ(176) #define INT_MALI_PP6_MMU AM_IRQ(177) #define INT_MALI_PP7 AM_IRQ(178) #define INT_MALI_PP7_MMU AM_IRQ(179) However, the driver from the 3.10 vendor kernel does not use the following four interrupt lines: - INT_MALI_PP3 - INT_MALI_PP3_MMU - INT_MALI_PP7 - INT_MALI_PP7_MMU Drop the "pp3" and "ppmmu3" interrupt lines. This is also important because there is no matching entry in interrupt-names for it (meaning the "pp2" interrupt is actually assigned to the "pp3" interrupt line). Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: thomas graichen <thomas.graichen@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200815181957.408649-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 737e7610b545cc901a9696083c1824a7104b8d1b ]

The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
  #define INT_MALI_GP                 AM_IRQ(160)
  #define INT_MALI_GP_MMU             AM_IRQ(161)
  #define INT_MALI_PP                 AM_IRQ(162)
  #define INT_MALI_PMU                AM_IRQ(163)
  #define INT_MALI_PP0                AM_IRQ(164)
  #define INT_MALI_PP0_MMU            AM_IRQ(165)
  #define INT_MALI_PP1                AM_IRQ(166)
  #define INT_MALI_PP1_MMU            AM_IRQ(167)
  #define INT_MALI_PP2                AM_IRQ(168)
  #define INT_MALI_PP2_MMU            AM_IRQ(169)
  #define INT_MALI_PP3                AM_IRQ(170)
  #define INT_MALI_PP3_MMU            AM_IRQ(171)
  #define INT_MALI_PP4                AM_IRQ(172)
  #define INT_MALI_PP4_MMU            AM_IRQ(173)
  #define INT_MALI_PP5                AM_IRQ(174)
  #define INT_MALI_PP5_MMU            AM_IRQ(175)
  #define INT_MALI_PP6                AM_IRQ(176)
  #define INT_MALI_PP6_MMU            AM_IRQ(177)
  #define INT_MALI_PP7                AM_IRQ(178)
  #define INT_MALI_PP7_MMU            AM_IRQ(179)

However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU

Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).

Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200815181957.408649-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>