commit 0b38b5e1d0e2f361e418e05c179db05bb688bbd6 upstream.

When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.

Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull parsic fix from Helge Deller:
 "Fix a recursive loop when running 'make ARCH=parisc defconfig'"

* 'parisc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix defconfig selection

Pull ARM DT and driver fixes from Arnd Bergmann:
 "For the devicetree files, there are a total of 20 patches, almost
  entirely for 32-bit machines:

   - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
     both for correctness and for style that are addressed in separate
     patches. This causes most of the changed lines of the DT updates
     this time.

   - More Allwinner updates fixing the identification of the security
     system on sun8i/A33, a recent regression of the A83t ethernet, and
     a few board specific issues on the TBS-A711 macine.

   - Several bug fixes for OMAP dts files, most notably fixing the
     timings for the NAND flash on the Nokia N900 that regressed a while
     ago after the move to configuring them from DT. Some other OMAPs
     now set the correct dma limits on the L3 bus, and a regression fix
     addresses lost Ethernet on dm814x

   - One incorrect setting in the newly added Raspberry Pi Zero W that
     may cause issues with the SD card controller.

   - A missing property on the bcm2835 firmware node caused incorrect
     DMA settings.

   - An old bug on the oxnas platform causing spurious interrupts is
     finally addressed.

   - A regression on the Exynos Midas board broke the OLED panel power
     supply.

   - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
     is now set to the values from the datasheet.

   - Some 64-bit machines use a deprecated string to identify the PSCI
     firmware.

  There are also several small code fixes addressing mostly serious
  issues:

   - Fix the sunxi rsb bus access to no longer return incorrect data
     when mixing 8 and 16 bit I/O.

   - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
     quirk in the ti-sysc driver

   - Fix a NULL pointer access from a race in the fsl dpio driver

   - Fix a v5.5 regression in the exynos-chipid driver that caused an
     invalid error code probing the device on non-exynos platforms

   - Fix an out-of-bounds access in the AMD TEE driver"

* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  soc: samsung: chipid: Fix return value on non-Exynos platforms
  arm64: dts: Fix leftover entry-methods for PSCI
  ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
  ARM: dts: oxnas: Fix clear-mask property
  ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
  ARM: dts: omap5: Add bus_dma_limit for L3 bus
  ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
  ARM: dts: dra7: Add bus_dma_limit for L3 bus
  ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
  ARM: dts: sun8i: a33: add the new SS compatible
  dt-bindings: crypto: add new compatible for A33 SS
  ARM: dts: sun8i: r40: Move SPI device nodes based on address order
  ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
  ARM: dts: sun8i: r40: Move AHCI device node based on address order
  ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
  soc: fsl: dpio: register dpio irq handlers after dpio create
  tee: amdtee: out of bounds read in find_session()
  ARM: dts: N900: fix onenand timings
  bus: ti-sysc: Fix quirk flags for lcdc on am335x
  ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
  ...

Pull RISC-V fixes from Palmer Dabbelt:
 "Sorry for the last minute patches, but a few things fell through the
  cracks recently. I was on the fence about sending a late pull request
  just for the M-mode fixes, as we don't really have any users, but the
  last patch fixes the build for Fedora which I consider pretty
  important.

  Given that the M-mode fixes should be very low risk, I figured it's
  worth sending them along as well.

  Thhis passes my standard 'boot in QEMU' test"

* tag 'riscv-for-linus-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Move all address space definition macros to one place
  RISC-V: Only select essential drivers for SOC_VIRT config
  riscv: fix the IPI missing issue in nommu mode
  riscv: uaccess should be used in nommu mode

Pull arm64 fix from Will Deacon:
 "Fix defconfig build when using Clang's integrated assembler"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: alternative: fix build with clang integrated assembler

Fix the recursive loop when running "make ARCH=parisc defconfig".

Fixes: 84669923e1ed ("parisc: Regenerate parisc defconfigs")
Noticed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>

We get the following compilation error if CONFIG_SPARSEMEM_VMEMMAP is set.

---------------------------------------------------------------
./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
(first use in this function); did you mean ‘mem_map’?
 #define __pfn_to_page(pfn) (vmemmap + (pfn))
                             ^~~~~~~
./include/asm-generic/memory_model.h:82:21: note: in expansion of
macro ‘__pfn_to_page’

 #define pfn_to_page __pfn_to_page
                     ^~~~~~~~~~~~~
./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
‘pfn_to_page’
  return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
---------------------------------------------------------------

Fix the compliation errors by moving all the address space definition
macros before including pgtable-64.h.

Fixes: 8ad8b72721d0 (riscv: Add KASAN support)

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull KVM fixes from Paolo Bonzini:
 "x86 bug fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: X86: Narrow down the IPI fastpath to single target IPI
  KVM: LAPIC: Also cancel preemption timer when disarm LAPIC timer
  KVM: VMX: don't allow memory operands for inline asm that modifies SP
  KVM: LAPIC: Mark hrtimer for period or oneshot mode to expire in hard interrupt context
  KVM: SVM: Issue WBINVD after deactivating an SEV guest
  KVM: SVM: document KVM_MEM_ENCRYPT_OP, let userspace detect if SEV is available
  KVM: x86: remove bogus user-triggerable WARN_ON

The kconfig select causes build failues for SOC_VIRT config becaus
we are selecting lot of VIRTIO drivers without selecting all required
dependencies.

Better approach is to only select essential drivers from SOC_VIRT
config option and enable required VIRTIO drivers using defconfigs.

Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The original single target IPI fastpath patch forgot to filter the
ICR destination shorthand field. Multicast IPI is not suitable for
this feature since wakeup the multiple sleeping vCPUs will extend
the interrupt disabled time, it especially worse in the over-subscribe
and VM has a little bit more vCPUs scenario. Let's narrow it down to
single target IPI.

Two VMs, each is 76 vCPUs, one running 'ebizzy -M', the other
running cyclictest on all vCPUs, w/ this patch, the avg score
of cyclictest can improve more than 5%. (pv tlb, pv ipi, pv
sched yield are disabled during testing to avoid the disturb).

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585189202-1708-3-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>