linux-stable.git/arch, branch v5.6.16 Linux kernel stable tree powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again 2020-06-03T06:23:37+00:00 Petr Mladek pmladek@suse.com 2020-05-27T12:28:44+00:00 e0e4387b71b1e67657b5465d4f7fc3e55624b67f commit d195b1d1d1196681ac4775e0361e9cca70f740c2 upstream. The commit 0ebeea8ca8a4d1d453a ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") caused that bpf_probe_read{, str}() functions were not longer available on architectures where the same logical address might have different content in kernel and user memory mapping. These architectures should use probe_read_{user,kernel}_str helpers. For backward compatibility, the problematic functions are still available on architectures where the user and kernel address spaces are not overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. At the moment, these backward compatible functions are enabled only on x86_64, arm, and arm64. Let's do it also on powerpc that has the non overlapping address space as well. Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d195b1d1d1196681ac4775e0361e9cca70f740c2 upstream.

The commit 0ebeea8ca8a4d1d453a ("bpf: Restrict bpf_probe_read{, str}() only
to archs where they work") caused that bpf_probe_read{, str}() functions
were not longer available on architectures where the same logical address
might have different content in kernel and user memory mapping. These
architectures should use probe_read_{user,kernel}_str helpers.

For backward compatibility, the problematic functions are still available
on architectures where the user and kernel address spaces are not
overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.

At the moment, these backward compatible functions are enabled only on x86_64,
arm, and arm64. Let's do it also on powerpc that has the non overlapping
address space as well.

Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/ioperm: Prevent a memory leak when fork fails 2020-06-03T06:23:34+00:00 Jay Lang jaytlang@mit.edu 2020-05-24T16:27:39+00:00 9dabfcc6da41a35308f8734d9d5e9950070de142 commit 4bfe6cce133cad82cea04490c308795275857782 upstream. In the copy_process() routine called by _do_fork(), failure to allocate a PID (or further along in the function) will trigger an invocation to exit_thread(). This is done to clean up from an earlier call to copy_thread_tls(). Naturally, the child task is passed into exit_thread(), however during the process, io_bitmap_exit() nullifies the parent's io_bitmap rather than the child's. As copy_thread_tls() has been called ahead of the failure, the reference count on the calling thread's io_bitmap is incremented as we would expect. However, io_bitmap_exit() doesn't accept any arguments, and thus assumes it should trash the current thread's io_bitmap reference rather than the child's. This is pretty sneaky in practice, because in all instances but this one, exit_thread() is called with respect to the current task and everything works out. A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to get a bitmap allocated, and force a clone3() syscall to fail by passing in a zeroed clone_args structure. The kernel handles the erroneous struct and the buggy code path is followed, and even though the parent's reference to the io_bitmap is trashed, the child still holds a reference and thus the structure will never be freed. Fix this by tweaking io_bitmap_exit() and its subroutines to accept a task_struct argument which to operate on. Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped") Signed-off-by: Jay Lang <jaytlang@mit.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable#@vger.kernel.org Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4bfe6cce133cad82cea04490c308795275857782 upstream.

In the copy_process() routine called by _do_fork(), failure to allocate
a PID (or further along in the function) will trigger an invocation to
exit_thread(). This is done to clean up from an earlier call to
copy_thread_tls(). Naturally, the child task is passed into exit_thread(),
however during the process, io_bitmap_exit() nullifies the parent's
io_bitmap rather than the child's.

As copy_thread_tls() has been called ahead of the failure, the reference
count on the calling thread's io_bitmap is incremented as we would expect.
However, io_bitmap_exit() doesn't accept any arguments, and thus assumes
it should trash the current thread's io_bitmap reference rather than the
child's. This is pretty sneaky in practice, because in all instances but
this one, exit_thread() is called with respect to the current task and
everything works out.

A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to
get a bitmap allocated, and force a clone3() syscall to fail by passing
in a zeroed clone_args structure. The kernel handles the erroneous struct
and the buggy code path is followed, and even though the parent's reference
to the io_bitmap is trashed, the child still holds a reference and thus
the structure will never be freed.

Fix this by tweaking io_bitmap_exit() and its subroutines to accept a
task_struct argument which to operate on.

Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped")
Signed-off-by: Jay Lang <jaytlang@mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable#@vger.kernel.org
Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
copy_xstate_to_kernel(): don't leave parts of destination uninitialized 2020-06-03T06:23:28+00:00 Al Viro viro@zeniv.linux.org.uk 2020-05-26T22:39:49+00:00 28ae629d311ff38fac54b1483166d3d0f54cf077 commit 9e4636545933131de15e1ecd06733538ae939b2f upstream. copy the corresponding pieces of init_fpstate into the gaps instead. Cc: stable@kernel.org Tested-by: Alexander Potapenko <glider@google.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9e4636545933131de15e1ecd06733538ae939b2f upstream.

copy the corresponding pieces of init_fpstate into the gaps instead.

Cc: stable@kernel.org
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems 2020-06-03T06:23:28+00:00 Alexander Dahl post@lespocky.de 2020-05-26T17:57:49+00:00 0b69223f2c19cc0bc731a90bb5a6007c8e975616 commit 88743470668ef5eb6b7ba9e0f99888e5999bf172 upstream. The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is 4 294 967 296 or 0x100000000 which is no problem on 64 bit systems. The patch does not change the later overall result of 0x100000 for MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new calculation yields the same result, but does not require 64 bit arithmetic. On 32 bit systems the old calculation suffers from an arithmetic overflow in that intermediate term in braces: 4UL aka unsigned long int is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does not fit in 4 bytes), the in braces result is truncated to zero, the following right shift does not alter that, so MAX_DMA32_PFN evaluates to 0 on 32 bit systems. That wrong value is a problem in a comparision against MAX_DMA32_PFN in the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if swiotlb should be active. That comparison yields the opposite result, when compiling on 32 bit systems. This was not possible before 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too") when that MAX_DMA32_PFN was first made visible to x86_32 (and which landed in v3.0). In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on x86-32. However if one has set CONFIG_IOMMU_INTEL, since c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used") there's a dependency on CONFIG_SWIOTLB, which was not necessarily active before. That landed in v5.4, where we noticed it in the fli4l Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64 bit kernel configs there (I could not find out why, so let's just say historical reasons). The effect is at boot time 64 MiB (default size) were allocated for bounce buffers now, which is a noticeable amount of memory on small systems like pcengines ALIX 2D3 with 256 MiB memory, which are still frequently used as home routers. We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4 (LTS) in fli4l and got that kernel messages for example: Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018 … Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem) … PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB) The initial analysis and the suggested fix was done by user 'sourcejedi' at stackoverflow and explicitly marked as GPLv2 for inclusion in the Linux kernel: https://unix.stackexchange.com/a/520525/50007 The new calculation, which does not suffer from that overflow, is the same as for arch/mips now as suggested by Robin Murphy. The fix was tested by fli4l users on round about two dozen different systems, including both 32 and 64 bit archs, bare metal and virtualized machines. [ bp: Massage commit message. ] Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too") Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Alexander Dahl <post@lespocky.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://unix.stackexchange.com/q/520065/50007 Link: https://web.nettworks.org/bugs/browse/FFL-2560 Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 88743470668ef5eb6b7ba9e0f99888e5999bf172 upstream.

The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
4 294 967 296 or 0x100000000 which is no problem on 64 bit systems.
The patch does not change the later overall result of 0x100000 for
MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new
calculation yields the same result, but does not require 64 bit
arithmetic.

On 32 bit systems the old calculation suffers from an arithmetic
overflow in that intermediate term in braces: 4UL aka unsigned long int
is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
not fit in 4 bytes), the in braces result is truncated to zero, the
following right shift does not alter that, so MAX_DMA32_PFN evaluates to
0 on 32 bit systems.

That wrong value is a problem in a comparision against MAX_DMA32_PFN in
the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if
swiotlb should be active.  That comparison yields the opposite result,
when compiling on 32 bit systems.

This was not possible before

  1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")

when that MAX_DMA32_PFN was first made visible to x86_32 (and which
landed in v3.0).

In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on
x86-32.

However if one has set CONFIG_IOMMU_INTEL, since

  c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")

there's a dependency on CONFIG_SWIOTLB, which was not necessarily
active before. That landed in v5.4, where we noticed it in the fli4l
Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64
bit kernel configs there (I could not find out why, so let's just say
historical reasons).

The effect is at boot time 64 MiB (default size) were allocated for
bounce buffers now, which is a noticeable amount of memory on small
systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
frequently used as home routers.

We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
(LTS) in fli4l and got that kernel messages for example:

  Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
  …
  Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
  …
  PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)

The initial analysis and the suggested fix was done by user 'sourcejedi'
at stackoverflow and explicitly marked as GPLv2 for inclusion in the
Linux kernel:

  https://unix.stackexchange.com/a/520525/50007

The new calculation, which does not suffer from that overflow, is the
same as for arch/mips now as suggested by Robin Murphy.

The fix was tested by fli4l users on round about two dozen different
systems, including both 32 and 64 bit archs, bare metal and virtualized
machines.

 [ bp: Massage commit message. ]

Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://unix.stackexchange.com/q/520065/50007
Link: https://web.nettworks.org/bugs/browse/FFL-2560
Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
parisc: Fix kernel panic in mem_init() 2020-06-03T06:23:27+00:00 Helge Deller deller@gmx.de 2020-05-28T20:29:25+00:00 130088554c370b497ec7744bc437b09fee1991dd [ Upstream commit bf71bc16e02162388808949b179d59d0b571b965 ] The Debian kernel v5.6 triggers this kernel panic: Kernel panic - not syncing: Bad Address (null pointer deref?) Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000 CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1 IAOQ[0]: mem_init+0xb0/0x150 IAOQ[1]: mem_init+0xb4/0x150 RP(r2): start_kernel+0x6c8/0x1190 Backtrace: [<0000000040101ab4>] start_kernel+0x6c8/0x1190 [<0000000040108574>] start_parisc+0x158/0x1b8 on a HP-PARISC rp3440 machine with this memory layout: Memory Ranges: 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB 1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB Fix the crash by avoiding virt_to_page() and similar functions in mem_init() until the memory zones have been fully set up. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bf71bc16e02162388808949b179d59d0b571b965 ]

The Debian kernel v5.6 triggers this kernel panic:

 Kernel panic - not syncing: Bad Address (null pointer deref?)
 Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
  IAOQ[0]: mem_init+0xb0/0x150
  IAOQ[1]: mem_init+0xb4/0x150
  RP(r2): start_kernel+0x6c8/0x1190
 Backtrace:
  [<0000000040101ab4>] start_kernel+0x6c8/0x1190
  [<0000000040108574>] start_parisc+0x158/0x1b8

on a HP-PARISC rp3440 machine with this memory layout:
 Memory Ranges:
  0) Start 0x0000000000000000 End 0x000000003fffffff Size   1024 MB
  1) Start 0x0000004040000000 End 0x00000040ffdfffff Size   3070 MB

Fix the crash by avoiding virt_to_page() and similar functions in
mem_init() until the memory zones have been fully set up.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy 2020-06-03T06:23:18+00:00 Lubomir Rintel lkundrak@v3.sk 2020-04-19T17:11:55+00:00 a81254cb8f1b06bfe55953d013629b63bbd03c49 [ Upstream commit 24cf6eef79a7e85cfd2ef9dea52f769c9192fc6e ] "usb-nop-xceiv" is good enough if we don't lose the configuration done by the firmware, but we'd really prefer a real driver. Unfortunately, the PHY core is odd in that when the node is compatible with "usb-nop-xceiv", it ignores the other compatible strings. Let's just remove it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 24cf6eef79a7e85cfd2ef9dea52f769c9192fc6e ]

"usb-nop-xceiv" is good enough if we don't lose the configuration done
by the firmware, but we'd really prefer a real driver.

Unfortunately, the PHY core is odd in that when the node is compatible
with "usb-nop-xceiv", it ignores the other compatible strings. Let's
just remove it.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: mmp3-dell-ariel: Fix the SPI devices 2020-06-03T06:23:18+00:00 Lubomir Rintel lkundrak@v3.sk 2020-04-19T17:11:57+00:00 c513b67835f36c964f09935145cc4a249daf1b4c [ Upstream commit 233cbffaa0b9ca874731efee67a11f005da1f87c ] I've managed to get about everything wrong while digging these out of OEM's board file. Correct the bus numbers, the exact model of the NOR flash, polarity of the chip selects and align the SPI frequency with the data sheet. Tested that it works now, with a slight fix to the PXA SSP driver. Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 233cbffaa0b9ca874731efee67a11f005da1f87c ]

I've managed to get about everything wrong while digging these out of
OEM's board file.

Correct the bus numbers, the exact model of the NOR flash, polarity of
the chip selects and align the SPI frequency with the data sheet.

Tested that it works now, with a slight fix to the PXA SSP driver.

Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks 2020-06-03T06:23:17+00:00 Lubomir Rintel lkundrak@v3.sk 2020-04-19T17:11:56+00:00 da8faa3a9851fb16e808a374ff702202d52e21e3 [ Upstream commit ec7d12faf81de983efce8ff23f41c5d1bff14c41 ] Clocks are in fact slightly different on MMP3. In particular, PLL2 is fixed to a different frequency, there's an extra PLL3, and the GPU clocks are configured differently. Link: https://lore.kernel.org/r/20200419171157.672999-15-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ec7d12faf81de983efce8ff23f41c5d1bff14c41 ]

Clocks are in fact slightly different on MMP3. In particular, PLL2 is
fixed to a different frequency, there's an extra PLL3, and the GPU
clocks are configured differently.

Link: https://lore.kernel.org/r/20200419171157.672999-15-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: bcm: HR2: Fix PPI interrupt types 2020-06-03T06:23:17+00:00 Hamish Martin hamish.martin@alliedtelesis.co.nz 2020-05-20T04:30:42+00:00 2a1339a2afb8457eea356b3e85fddf82d72adcd5 [ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ] These error messages are output when booting on a BCM HR2 system: GIC: PPI11 is secure or misconfigured GIC: PPI13 is secure or misconfigured Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers. The same issue was resolved for NSP systems in commit 5f1aa51c7a1e ("ARM: dts: NSP: Fix PPI interrupt types"). Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ]

These error messages are output when booting on a BCM HR2 system:
    GIC: PPI11 is secure or misconfigured
    GIC: PPI13 is secure or misconfigured

Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.

The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").

Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity 2020-06-03T06:23:17+00:00 Vincent Stehlé vincent.stehle@laposte.net 2020-04-18T12:35:22+00:00 d2777a5c1cd196ace1f70c4b9fe0828fb7888deb [ Upstream commit 58bb90ab415562eededb932455046924e65df342 ] The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>