linux-stable.git/arch, branch v5.4.7

powerpc/irq: fix stack overflow verification

2019-12-31T15:46:29+00:00

commit 099bc4812f09155da77eeb960a983470249c9ce1 upstream.

Before commit 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of
the irq stack"), check_stack_overflow() was called by do_IRQ(), before
switching to the irq stack.
In that commit, do_IRQ() was renamed __do_irq(), and is now executing
on the irq stack, so check_stack_overflow() has just become almost
useless.

Move check_stack_overflow() call in do_IRQ() to do the check while
still on the current stack.

Fixes: 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman

powerpc/vcpu: Assume dedicated processors as non-preempt

2019-12-31T15:46:27+00:00

commit 14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.

With commit 247f2f6f3c70 ("sched/core: Don't schedule threads on
pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule
tasks on wakeup. This leads to wrong choice of CPU, which in-turn
leads to larger wakeup latencies. Eventually, it leads to performance
regression in latency sensitive benchmarks like soltp, schbench etc.

On Powerpc, vcpu_is_preempted() only looks at yield_count. If the
yield_count is odd, the vCPU is assumed to be preempted. However
yield_count is increased whenever the LPAR enters CEDE state (idle).
So any CPU that has entered CEDE state is assumed to be preempted.

Even if vCPU of dedicated LPAR is preempted/donated, it should have
right of first-use since they are supposed to own the vCPU.

On a Power9 System with 32 cores:
  # lscpu
  Architecture:        ppc64le
  Byte Order:          Little Endian
  CPU(s):              128
  On-line CPU(s) list: 0-127
  Thread(s) per core:  8
  Core(s) per socket:  1
  Socket(s):           16
  NUMA node(s):        2
  Model:               2.2 (pvr 004e 0202)
  Model name:          POWER9 (architected), altivec supported
  Hypervisor vendor:   pHyp
  Virtualization type: para
  L1d cache:           32K
  L1i cache:           32K
  L2 cache:            512K
  L3 cache:            10240K
  NUMA node0 CPU(s):   0-63
  NUMA node1 CPU(s):   64-127

  # perf stat -a -r 5 ./schbench
  v5.4                               v5.4 + patch
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 45
        75.0000th: 62                      75.0th: 63
        90.0000th: 71                      90.0th: 74
        95.0000th: 77                      95.0th: 78
        *99.0000th: 91                     *99.0th: 82
        99.5000th: 707                     99.5th: 83
        99.9000th: 6920                    99.9th: 86
        min=0, max=10048                   min=0, max=96
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 46
        75.0000th: 61                      75.0th: 64
        90.0000th: 72                      90.0th: 75
        95.0000th: 79                      95.0th: 79
        *99.0000th: 691                    *99.0th: 83
        99.5000th: 3972                    99.5th: 85
        99.9000th: 8368                    99.9th: 91
        min=0, max=16606                   min=0, max=117
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 46
        75.0000th: 61                      75.0th: 64
        90.0000th: 71                      90.0th: 75
        95.0000th: 77                      95.0th: 79
        *99.0000th: 106                    *99.0th: 83
        99.5000th: 2364                    99.5th: 84
        99.9000th: 7480                    99.9th: 90
        min=0, max=10001                   min=0, max=95
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 47
        75.0000th: 62                      75.0th: 65
        90.0000th: 72                      90.0th: 75
        95.0000th: 78                      95.0th: 79
        *99.0000th: 93                     *99.0th: 84
        99.5000th: 108                     99.5th: 85
        99.9000th: 6792                    99.9th: 90
        min=0, max=17681                   min=0, max=117
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 46                      50.0th: 45
        75.0000th: 62                      75.0th: 64
        90.0000th: 73                      90.0th: 75
        95.0000th: 79                      95.0th: 79
        *99.0000th: 113                    *99.0th: 82
        99.5000th: 2724                    99.5th: 83
        99.9000th: 6184                    99.9th: 93
        min=0, max=9887                    min=0, max=111

   Performance counter stats for 'system wide' (5 runs):

  context-switches    43,373  ( +-  0.40% )   44,597 ( +-  0.55% )
  cpu-migrations       1,211  ( +-  5.04% )      220 ( +-  6.23% )
  page-faults         15,983  ( +-  5.21% )   15,360 ( +-  3.38% )

Waiman Long suggested using static_keys.

Fixes: 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Parth Shah 
Reported-by: Ihor Pasichnyk 
Tested-by: Juri Lelli 
Acked-by: Waiman Long 
Reviewed-by: Gautham R. Shenoy 
Signed-off-by: Srikar Dronamraju 
Acked-by: Phil Auld 
Reviewed-by: Vaidyanathan Srinivasan 
Tested-by: Parth Shah 
[mpe: Move the key and setting of the key to pseries/setup.c]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20191213035036.6913-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman

x86/mce: Fix possibly incorrect severity calculation on AMD

2019-12-31T15:46:27+00:00

commit a3a57ddad061acc90bef39635caf2b2330ce8f21 upstream.

The function mce_severity_amd_smca() requires m->bank to be initialized
for correct operation. Fix the one case, where mce_severity() is called
without doing so.

Fixes: 6bda529ec42e ("x86/mce: Grade uncorrected errors for SMCA-enabled systems")
Fixes: d28af26faa0b ("x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()")
Signed-off-by: Jan H. Schönherr 
Signed-off-by: Borislav Petkov 
Reviewed-by: Tony Luck 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: linux-edac 
Cc: 
Cc: Thomas Gleixner 
Cc: x86-ml 
Cc: Yazen Ghannam 
Link: https://lkml.kernel.org/r/20191210000733.17979-4-jschoenh@amazon.de
Signed-off-by: Greg Kroah-Hartman

x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[]

2019-12-31T15:46:26+00:00

commit 966af20929ac24360ba3fac5533eb2ab003747da upstream.

Each logical CPU in Scalable MCA systems controls a unique set of MCA
banks in the system. These banks are not shared between CPUs. The bank
types and ordering will be the same across CPUs on currently available
systems.

However, some CPUs may see a bank as Reserved/Read-as-Zero (RAZ) while
other CPUs do not. In this case, the bank seen as Reserved on one CPU is
assumed to be the same type as the bank seen as a known type on another
CPU.

In general, this occurs when the hardware represented by the MCA bank
is disabled, e.g. disabled memory controllers on certain models, etc.
The MCA bank is disabled in the hardware, so there is no possibility of
getting an MCA/MCE from it even if it is assumed to have a known type.

For example:

Full system:
	Bank  |  Type seen on CPU0  |  Type seen on CPU1
	------------------------------------------------
	 0    |         LS          |          LS
	 1    |         UMC         |          UMC
	 2    |         CS          |          CS

System with hardware disabled:
	Bank  |  Type seen on CPU0  |  Type seen on CPU1
	------------------------------------------------
	 0    |         LS          |          LS
	 1    |         UMC         |          RAZ
	 2    |         CS          |          CS

For this reason, there is a single, global struct smca_banks[] that is
initialized at boot time. This array is initialized on each CPU as it
comes online. However, the array will not be updated if an entry already
exists.

This works as expected when the first CPU (usually CPU0) has all
possible MCA banks enabled. But if the first CPU has a subset, then it
will save a "Reserved" type in smca_banks[]. Successive CPUs will then
not be able to update smca_banks[] even if they encounter a known bank
type.

This may result in unexpected behavior. Depending on the system
configuration, a user may observe issues enumerating the MCA
thresholding sysfs interface. The issues may be as trivial as sysfs
entries not being available, or as severe as system hangs.

For example:

	Bank  |  Type seen on CPU0  |  Type seen on CPU1
	------------------------------------------------
	 0    |         LS          |          LS
	 1    |         RAZ         |          UMC
	 2    |         CS          |          CS

Extend the smca_banks[] entry check to return if the entry is a
non-reserved type. Otherwise, continue so that CPUs that encounter a
known bank type can update smca_banks[].

Fixes: 68627a697c19 ("x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type")
Signed-off-by: Yazen Ghannam 
Signed-off-by: Borislav Petkov 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: linux-edac 
Cc: 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: x86-ml 
Link: https://lkml.kernel.org/r/20191121141508.141273-1-Yazen.Ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman

x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure()

2019-12-31T15:46:25+00:00

commit 246ff09f89e54fdf740a8d496176c86743db3ec7 upstream.

... because interrupts are disabled that early and sending IPIs can
deadlock:

  BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
  no locks held by swapper/1/0.
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [] copy_process+0x8b9/0x1ca0
  softirqs last  enabled at (0): [] copy_process+0x8b9/0x1ca0
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  Preemption disabled at:
  [] start_secondary+0x3b/0x190
  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.5.0-rc2+ #1
  Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
  Call Trace:
   dump_stack
   ___might_sleep.cold.92
   wait_for_completion
   ? generic_exec_single
   rdmsr_safe_on_cpu
   ? wrmsr_on_cpus
   mce_amd_feature_init
   mcheck_cpu_init
   identify_cpu
   identify_secondary_cpu
   smp_store_cpu_info
   start_secondary
   secondary_startup_64

The function smca_configure() is called only on the current CPU anyway,
therefore replace rdmsr_safe_on_cpu() with atomic rdmsr_safe() and avoid
the IPI.

 [ bp: Update commit message. ]

Signed-off-by: Konstantin Khlebnikov 
Signed-off-by: Borislav Petkov 
Reviewed-by: Yazen Ghannam 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: linux-edac 
Cc: 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: x86-ml 
Link: https://lkml.kernel.org/r/157252708836.3876.4604398213417262402.stgit@buzz
Signed-off-by: Greg Kroah-Hartman

x86/intel: Disable HPET on Intel Coffee Lake H platforms

2019-12-31T15:46:25+00:00

commit f8edbde885bbcab6a2b4a1b5ca614e6ccb807577 upstream.

Coffee Lake H SoC has similar behavior as Coffee Lake, skewed HPET timer
once the SoCs entered PC10.

So let's disable HPET on CFL-H platforms.

Signed-off-by: Kai-Heng Feng 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bp@alien8.de
Cc: feng.tang@intel.com
Cc: harry.pan@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20191129062303.18982-1-kai.heng.feng@canonical.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

KVM: arm64: Ensure 'params' is initialised when looking up sys register

2019-12-31T15:46:24+00:00

commit 1ce74e96c2407df2b5867e5d45a70aacb8923c14 upstream.

Commit 4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
introduced 'find_reg_by_id()', which looks up a system register only if
the 'id' index parameter identifies a valid system register. As part of
the patch, existing callers of 'find_reg()' were ported over to the new
interface, but this breaks 'index_to_sys_reg_desc()' in the case that the
initial lookup in the vCPU target table fails because we will then call
into 'find_reg()' for the system register table with an uninitialised
'param' as the key to the lookup.

GCC 10 is bright enough to spot this (amongst a tonne of false positives,
but hey!):

  | arch/arm64/kvm/sys_regs.c: In function ‘index_to_sys_reg_desc.part.0.isra’:
  | arch/arm64/kvm/sys_regs.c:983:33: warning: ‘params.Op2’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  |   983 |   (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2);
  | [...]

Revert the hunk of 4b927b94d5df which breaks 'index_to_sys_reg_desc()' so
that the old behaviour of checking the index upfront is restored.

Fixes: 4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
Signed-off-by: Will Deacon 
Signed-off-by: Marc Zyngier 
Cc: 
Link: https://lore.kernel.org/r/20191212094049.12437-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman

kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD

2019-12-31T15:46:23+00:00

commit 8715f05269bfbc6453e25e80825d781a82902f8e upstream.

The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
  CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
  CPUID.80000008H:EBX.AMD_SSBD[bit 24]
  CPUID.80000008H:EBX.VIRT_SSBD[bit 25]

Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.80000008H:EBX.AMD_SSBD[bit 24] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.

Fixes: 4c6903a0f9d76 ("KVM: x86: fix reporting of AMD speculation bug CPUID leaf")
Signed-off-by: Jim Mattson 
Reviewed-by: Jacob Xu 
Reviewed-by: Peter Shier 
Cc: Paolo Bonzini 
Cc: stable@vger.kernel.org
Reported-by: Eric Biggers 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD

2019-12-31T15:46:22+00:00

commit 396d2e878f92ec108e4293f1c77ea3bc90b414ff upstream.

The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
  CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
  CPUID.80000008H:EBX.AMD_SSBD[bit 24]
  CPUID.80000008H:EBX.VIRT_SSBD[bit 25]

Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.

Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code")
Signed-off-by: Jim Mattson 
Reviewed-by: Jacob Xu 
Reviewed-by: Peter Shier 
Cc: Paolo Bonzini 
Cc: stable@vger.kernel.org
Reported-by: Eric Biggers 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

KVM: PPC: Book3S HV: Fix regression on big endian hosts

2019-12-31T15:46:21+00:00

commit 228b607d8ea1b7d4561945058d5692709099d432 upstream.

VCPU_CR is the offset of arch.regs.ccr in kvm_vcpu.
arch/powerpc/include/asm/kvm_host.h defines arch.regs as a struct
pt_regs, and arch/powerpc/include/asm/ptrace.h defines the ccr field
of pt_regs as "unsigned long ccr".  Since unsigned long is 64 bits, a
64-bit load needs to be used to load it, unless an endianness specific
correction offset is added to access the desired subpart.  In this
case there is no reason to _not_ use a 64 bit load though.

Fixes: 6c85b7bc637b ("powerpc/kvm: Use UV_RETURN ucall to return to ultravisor")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Marcus Comstedt 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20191215094900.46740-1-marcus@mc.pp.se
Signed-off-by: Greg Kroah-Hartman