linux-stable.git/arch, branch v5.4.147 Linux kernel stable tree KVM: nVMX: Unconditionally clear nested.pi_pending on nested VM-Enter 2021-09-15T07:47:41+00:00 Sean Christopherson seanjc@google.com 2021-08-10T14:45:26+00:00 06dad664d4eae136e8dfa9eea955b154213f3f2e commit f7782bb8d818d8f47c26b22079db10599922787a upstream. Clear nested.pi_pending on nested VM-Enter even if L2 will run without posted interrupts enabled. If nested.pi_pending is left set from a previous L2, vmx_complete_nested_posted_interrupt() will pick up the stale flag and exit to userspace with an "internal emulation error" due the new L2 not having a valid nested.pi_desc. Arguably, vmx_complete_nested_posted_interrupt() should first check for posted interrupts being enabled, but it's also completely reasonable that KVM wouldn't screw up a fundamental flag. Not to mention that the mere existence of nested.pi_pending is a long-standing bug as KVM shouldn't move the posted interrupt out of the IRR until it's actually processed, e.g. KVM effectively drops an interrupt when it performs a nested VM-Exit with a "pending" posted interrupt. Fixing the mess is a future problem. Prior to vmx_complete_nested_posted_interrupt() interpreting a null PI descriptor as an error, this was a benign bug as the null PI descriptor effectively served as a check on PI not being enabled. Even then, the new flow did not become problematic until KVM started checking the result of kvm_check_nested_events(). Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing") Fixes: 966eefb89657 ("KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable") Fixes: 47d3530f86c0 ("KVM: x86: Exit to userspace when kvm_check_nested_events fails") Cc: stable@vger.kernel.org Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210810144526.2662272-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f7782bb8d818d8f47c26b22079db10599922787a upstream.

Clear nested.pi_pending on nested VM-Enter even if L2 will run without
posted interrupts enabled.  If nested.pi_pending is left set from a
previous L2, vmx_complete_nested_posted_interrupt() will pick up the
stale flag and exit to userspace with an "internal emulation error" due
the new L2 not having a valid nested.pi_desc.

Arguably, vmx_complete_nested_posted_interrupt() should first check for
posted interrupts being enabled, but it's also completely reasonable that
KVM wouldn't screw up a fundamental flag.  Not to mention that the mere
existence of nested.pi_pending is a long-standing bug as KVM shouldn't
move the posted interrupt out of the IRR until it's actually processed,
e.g. KVM effectively drops an interrupt when it performs a nested VM-Exit
with a "pending" posted interrupt.  Fixing the mess is a future problem.

Prior to vmx_complete_nested_posted_interrupt() interpreting a null PI
descriptor as an error, this was a benign bug as the null PI descriptor
effectively served as a check on PI not being enabled.  Even then, the
new flow did not become problematic until KVM started checking the result
of kvm_check_nested_events().

Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing")
Fixes: 966eefb89657 ("KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable")
Fixes: 47d3530f86c0 ("KVM: x86: Exit to userspace when kvm_check_nested_events fails")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810144526.2662272-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted 2021-09-15T07:47:40+00:00 Zelin Deng zelin.deng@linux.alibaba.com 2021-04-28T02:22:01+00:00 1735cec1e83c5e1b93de47c07d74d706644394ad commit d9130a2dfdd4b21736c91b818f87dbc0ccd1e757 upstream. When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature especially there's a big tsc warp (like a new vCPU is hot-added into VM which has been up for a long time), tsc_offset is added by a large value then go back to guest. This causes system time jump as tsc_timestamp is not adjusted in the meantime and pvclock monotonic character. To fix this, just notify kvm to update vCPU's guest time before back to guest. Cc: stable@vger.kernel.org Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d9130a2dfdd4b21736c91b818f87dbc0ccd1e757 upstream.

When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature
especially there's a big tsc warp (like a new vCPU is hot-added into VM
which has been up for a long time), tsc_offset is added by a large value
then go back to guest. This causes system time jump as tsc_timestamp is
not adjusted in the meantime and pvclock monotonic character.
To fix this, just notify kvm to update vCPU's guest time before back to
guest.

Cc: stable@vger.kernel.org
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: s390: index kvm->arch.idle_mask by vcpu_idx 2021-09-15T07:47:40+00:00 Halil Pasic pasic@linux.ibm.com 2021-08-27T12:54:29+00:00 20fff3ef33b225cbb666600de014c43fad75f839 commit a3e03bc1368c1bc16e19b001fc96dc7430573cc8 upstream. While in practice vcpu->vcpu_idx == vcpu->vcp_id is often true, it may not always be, and we must not rely on this. Reason is that KVM decides the vcpu_idx, userspace decides the vcpu_id, thus the two might not match. Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies that code like for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) { vcpu = kvm_get_vcpu(kvm, vcpu_id); do_stuff(vcpu); } is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an vcpu_id. The trouble is, we do actually use kvm->arch.idle_mask like this. To fix this problem we have two options. Either use kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id, or switch to indexing via vcpu_idx. The latter is preferable for obvious reasons. Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to indexing it by vcpu_idx. To keep gisa_int.kicked_mask indexed by the same index as idle_mask lets make the same change for it as well. Fixes: 1ee0bc559dc3 ("KVM: s390: get rid of local_int array") Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: <stable@vger.kernel.org> # 3.15+ Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a3e03bc1368c1bc16e19b001fc96dc7430573cc8 upstream.

While in practice vcpu->vcpu_idx ==  vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.

Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
                vcpu = kvm_get_vcpu(kvm, vcpu_id);
		do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id.  The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.

Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx.  To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.

Fixes: 1ee0bc559dc3 ("KVM: s390: get rid of local_int array")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/resctrl: Fix a maybe-uninitialized build warning treated as error 2021-09-15T07:47:40+00:00 Babu Moger babu.moger@amd.com 2021-08-20T21:52:42+00:00 0323ab5b254e05a5f84051afb61ad7e646d840f3 commit 527f721478bce3f49b513a733bacd19d6f34b08c upstream. The recent commit 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting") caused a RHEL build failure with an uninitialized variable warning treated as an error because it removed the default case snippet. The RHEL Makefile uses '-Werror=maybe-uninitialized' to force possibly uninitialized variable warnings to be treated as errors. This is also reported by smatch via the 0day robot. The error from the RHEL build is: arch/x86/kernel/cpu/resctrl/monitor.c: In function ‘__mon_event_count’: arch/x86/kernel/cpu/resctrl/monitor.c:261:12: error: ‘m’ may be used uninitialized in this function [-Werror=maybe-uninitialized] m->chunks += chunks; ^~ The upstream Makefile does not build using '-Werror=maybe-uninitialized'. So, the problem is not seen there. Fix the problem by putting back the default case snippet. [ bp: note that there's nothing wrong with the code and other compilers do not trigger this warning - this is being done just so the RHEL compiler is happy. ] Fixes: 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting") Reported-by: Terry Bowman <Terry.Bowman@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/162949631908.23903.17090272726012848523.stgit@bmoger-ubuntu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 527f721478bce3f49b513a733bacd19d6f34b08c upstream.

The recent commit

  064855a69003 ("x86/resctrl: Fix default monitoring groups reporting")

caused a RHEL build failure with an uninitialized variable warning
treated as an error because it removed the default case snippet.

The RHEL Makefile uses '-Werror=maybe-uninitialized' to force possibly
uninitialized variable warnings to be treated as errors. This is also
reported by smatch via the 0day robot.

The error from the RHEL build is:

  arch/x86/kernel/cpu/resctrl/monitor.c: In function ‘__mon_event_count’:
  arch/x86/kernel/cpu/resctrl/monitor.c:261:12: error: ‘m’ may be used
  uninitialized in this function [-Werror=maybe-uninitialized]
    m->chunks += chunks;
              ^~

The upstream Makefile does not build using '-Werror=maybe-uninitialized'.
So, the problem is not seen there. Fix the problem by putting back the
default case snippet.

 [ bp: note that there's nothing wrong with the code and other compilers
   do not trigger this warning - this is being done just so the RHEL compiler
   is happy. ]

Fixes: 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting")
Reported-by: Terry Bowman <Terry.Bowman@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/162949631908.23903.17090272726012848523.stgit@bmoger-ubuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op 2021-09-15T07:47:39+00:00 Kim Phillips kim.phillips@amd.com 2021-08-17T22:10:41+00:00 51f4575ca182071218cc709c13827d96c52a2d8f commit f11dd0d80555cdc8eaf5cfc9e19c9e198217f9f1 upstream. Commit: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs") neglected to do so. Fixes: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210817221048.88063-2-kim.phillips@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f11dd0d80555cdc8eaf5cfc9e19c9e198217f9f1 upstream.

Commit:

   2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")

neglected to do so.

Fixes: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210817221048.88063-2-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: Introduce BPF nospec instruction for mitigating Spectre v4 2021-09-15T07:47:38+00:00 Daniel Borkmann daniel@iogearbox.net 2021-09-07T13:16:58+00:00 e80c3533c354ede56146ab0e4fbb8304d0c1209f commit f5e81d1117501546b7be050c5fbafa6efd2c722c upstream. In case of JITs, each of the JIT backends compiles the BPF nospec instruction /either/ to a machine instruction which emits a speculation barrier /or/ to /no/ machine instruction in case the underlying architecture is not affected by Speculative Store Bypass or has different mitigations in place already. This covers both x86 and (implicitly) arm64: In case of x86, we use 'lfence' instruction for mitigation. In case of arm64, we rely on the firmware mitigation as controlled via the ssbd kernel parameter. Whenever the mitigation is enabled, it works for all of the kernel code with no need to provide any additional instructions here (hence only comment in arm64 JIT). Other archs can follow as needed. The BPF nospec instruction is specifically targeting Spectre v4 since i) we don't use a serialization barrier for the Spectre v1 case, and ii) mitigation instructions for v1 and v4 might be different on some archs. The BPF nospec is required for a future commit, where the BPF verifier does annotate intermediate BPF programs with speculation barriers. Co-developed-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> [OP: - adjusted context for 5.4 - apply riscv changes to /arch/riscv/net/bpf_jit_comp.c] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f5e81d1117501546b7be050c5fbafa6efd2c722c upstream.

In case of JITs, each of the JIT backends compiles the BPF nospec instruction
/either/ to a machine instruction which emits a speculation barrier /or/ to
/no/ machine instruction in case the underlying architecture is not affected
by Speculative Store Bypass or has different mitigations in place already.

This covers both x86 and (implicitly) arm64: In case of x86, we use 'lfence'
instruction for mitigation. In case of arm64, we rely on the firmware mitigation
as controlled via the ssbd kernel parameter. Whenever the mitigation is enabled,
it works for all of the kernel code with no need to provide any additional
instructions here (hence only comment in arm64 JIT). Other archs can follow
as needed. The BPF nospec instruction is specifically targeting Spectre v4
since i) we don't use a serialization barrier for the Spectre v1 case, and
ii) mitigation instructions for v1 and v4 might be different on some archs.

The BPF nospec is required for a future commit, where the BPF verifier does
annotate intermediate BPF programs with speculation barriers.

Co-developed-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[OP: - adjusted context for 5.4
     - apply riscv changes to /arch/riscv/net/bpf_jit_comp.c]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7 2021-09-15T07:47:34+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-08-05T07:21:10+00:00 a1194b805c900a0f5fdc077614bec5c471cddb3b [ Upstream commit 01c72cad790cb6cd3ccbe4c1402b6cb6c6bbffd0 ] The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF (by ARM). Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7") Link: https://lore.kernel.org/r/20210805072110.4730-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 01c72cad790cb6cd3ccbe4c1402b6cb6c6bbffd0 ]

The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF (by
ARM).

Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Link: https://lore.kernel.org/r/20210805072110.4730-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties 2021-09-15T07:47:32+00:00 Anand Moon linux.amoon@gmail.com 2021-07-05T11:23:55+00:00 87f817c560e63b4b857281e8e5dd8c6be2eb0f34 [ Upstream commit 72ccc373b064ae3ac0c5b5f2306069b60ca118df ] After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: 087a1d8b4e4c ("ARM: dts: meson8b: ec100: add the VDDEE regulator") Fixes: 3e7db1c1b7a3 ("ARM: dts: meson8b: ec100: improve the description of the regulators") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-4-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 72ccc373b064ae3ac0c5b5f2306069b60ca118df ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT

Fixes: 087a1d8b4e4c ("ARM: dts: meson8b: ec100: add the VDDEE regulator")
Fixes: 3e7db1c1b7a3 ("ARM: dts: meson8b: ec100: improve the description of the regulators")

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-4-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties 2021-09-15T07:47:32+00:00 Anand Moon linux.amoon@gmail.com 2021-07-05T11:23:54+00:00 e55d7cbe1fe2404bdf5c696bb2ec4db4eecebc09 [ Upstream commit 632062e540becbbcb067523ec8bcadb1239d9578 ] After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. Add missing pwm-supply for regulator-vcck regulator node. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: dee51cd0d2e8 ("ARM: dts: meson8b: mxq: add the VDDEE regulator") Fixes: d94f60e3dfa0 ("ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-3-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 632062e540becbbcb067523ec8bcadb1239d9578 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.
Add missing pwm-supply for regulator-vcck regulator node.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT

Fixes: dee51cd0d2e8 ("ARM: dts: meson8b: mxq: add the VDDEE regulator")
Fixes: d94f60e3dfa0 ("ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805")

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-3-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties 2021-09-15T07:47:32+00:00 Anand Moon linux.amoon@gmail.com 2021-07-05T11:23:53+00:00 4b0bbc412b510b0668f02f259941468a2e93662f [ Upstream commit 876228e9f935f19c7afc7ba394d17e2ec9143b65 ] After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: 524d96083b66 ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator") Fixes: 8bdf38be712d ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator") Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [narmstrong: fixed typo in commit s/observer/observe/] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-2-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 876228e9f935f19c7afc7ba394d17e2ec9143b65 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT

Fixes: 524d96083b66 ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator")
Fixes: 8bdf38be712d ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator")

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed typo in commit s/observer/observe/]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-2-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>