linux-stable.git/arch, branch v4.9.35

arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW

2017-06-29T11:00:30+00:00

commit dbb236c1ceb697a559e0694ac4c9e7b9131d0b16 upstream.

Recently vDSO support for CLOCK_MONOTONIC_RAW was added in
49eea433b326 ("arm64: Add support for CLOCK_MONOTONIC_RAW in
clock_gettime() vDSO"). Noticing that the core timekeeping code
never set tkr_raw.xtime_nsec, the vDSO implementation didn't
bother exposing it via the data page and instead took the
unshifted tk->raw_time.tv_nsec value which was then immediately
shifted left in the vDSO code.

Unfortunately, by accellerating the MONOTONIC_RAW clockid, it
uncovered potential 1ns time inconsistencies caused by the
timekeeping core not handing sub-ns resolution.

Now that the core code has been fixed and is actually setting
tkr_raw.xtime_nsec, we need to take that into account in the
vDSO by adding it to the shifted raw_time value, in order to
fix the user-visible inconsistency. Rather than do that at each
use (and expand the data page in the process), instead perform
the shift/addition operation when populating the data page and
remove the shift from the vDSO code entirely.

[jstultz: minor whitespace tweak, tried to improve commit
 message to make it more clear this fixes a regression]
Reported-by: John Stultz 
Signed-off-by: Will Deacon 
Signed-off-by: John Stultz 
Tested-by: Daniel Mentz 
Acked-by: Kevin Brodsky 
Cc: Prarit Bhargava 
Cc: Richard Cochran 
Cc: Stephen Boyd 
Cc: Miroslav Lichvar 
Link: http://lkml.kernel.org/r/1496965462-20003-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

powerpc/64s: Handle data breakpoints in Radix mode

2017-06-29T11:00:29+00:00

commit d89ba5353f301971dd7d2f9fdf25c4432728f38e upstream.

On Power9, trying to use data breakpoints throws the splat shown
below. This is because the check for a data breakpoint in DSISR is in
do_hash_page(), which is not called when in Radix mode.

  Unable to handle kernel paging request for data at address 0xc000000000e19218
  Faulting instruction address: 0xc0000000001155e8
  cpu 0x0: Vector: 300 (Data Access) at [c0000000ef1e7b20]
  pc: c0000000001155e8: find_pid_ns+0x48/0xe0
  lr: c000000000116ac4: find_task_by_vpid+0x44/0x90
  sp: c0000000ef1e7da0
  msr: 9000000000009033
  dar: c000000000e19218
  dsisr: 400000

Move the check to handle_page_fault() so as to catch data breakpoints
in both Hash and Radix MMU modes.

We have to change the check in do_hash_page() against 0xa410 to use
0xa450, so as to include the value of (DSISR_DABRMATCH << 16).

There are two sites that call handle_page_fault() when in Radix, both
already pass DSISR in r4.

Fixes: caca285e5ab4 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code")
Reported-by: Shriya R. Kulkarni 
Signed-off-by: Naveen N. Rao 
[mpe: Fix the fall-through case on hash, we need to reload DSISR]
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

powerpc/kprobes: Pause function_graph tracing during jprobes handling

2017-06-29T11:00:29+00:00

commit a9f8553e935f26cb5447f67e280946b0923cd2dc upstream.

This fixes a crash when function_graph and jprobes are used together.
This is essentially commit 237d28db036e ("ftrace/jprobes/x86: Fix
conflict between jprobes and function graph tracing"), but for powerpc.

Jprobes breaks function_graph tracing since the jprobe hook needs to use
jprobe_return(), which never returns back to the hook, but instead to
the original jprobe'd function. The solution is to momentarily pause
function_graph tracing before invoking the jprobe hook and re-enable it
when returning back to the original jprobe'd function.

Fixes: 6794c78243bf ("powerpc64: port of the function graph tracer")
Signed-off-by: Naveen N. Rao 
Acked-by: Masami Hiramatsu 
Acked-by: Steven Rostedt (VMware) 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

KVM: PPC: Book3S HV: Context-switch EBB registers properly

2017-06-29T11:00:28+00:00

commit ca8efa1df1d15a1795a2da57f9f6aada6ed6b946 upstream.

This adds code to save the values of three SPRs (special-purpose
registers) used by userspace to control event-based branches (EBBs),
which are essentially interrupts that get delivered directly to
userspace.  These registers are loaded up with guest values when
entering the guest, and their values are saved when exiting the
guest, but we were not saving the host values and restoring them
before going back to userspace.

On POWER8 this would only affect userspace programs which explicitly
request the use of EBBs and also use the KVM_RUN ioctl, since the
only source of EBBs on POWER8 is the PMU, and there is an explicit
enable bit in the PMU registers (and those PMU registers do get
properly context-switched between host and guest).  On POWER9 there
is provision for externally-generated EBBs, and these are not subject
to the control in the PMU registers.

Since these registers only affect userspace, we can save them when
we first come in from userspace and restore them before returning to
userspace, rather than saving/restoring the host values on every
guest entry/exit.  Similarly, we don't need to worry about their
values on offline secondary threads since they execute in the context
of the idle task, which never executes in userspace.

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras 
Signed-off-by: Greg Kroah-Hartman

KVM: PPC: Book3S HV: Preserve userspace HTM state properly

2017-06-29T11:00:28+00:00

commit 46a704f8409f79fd66567ad3f8a7304830a84293 upstream.

If userspace attempts to call the KVM_RUN ioctl when it has hardware
transactional memory (HTM) enabled, the values that it has put in the
HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by
guest values.  To fix this, we detect this condition and save those
SPR values in the thread struct, and disable HTM for the task.  If
userspace goes to access those SPRs or the HTM facility in future,
a TM-unavailable interrupt will occur and the handler will reload
those SPRs and re-enable HTM.

If userspace has started a transaction and suspended it, we would
currently lose the transactional state in the guest entry path and
would almost certainly get a "TM Bad Thing" interrupt, which would
cause the host to crash.  To avoid this, we detect this case and
return from the KVM_RUN ioctl with an EINVAL error, with the KVM
exit reason set to KVM_EXIT_FAIL_ENTRY.

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras 
Signed-off-by: Greg Kroah-Hartman

KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows

2017-06-29T11:00:28+00:00

commit addb63c18a0d52a9ce2611d039f981f7b6148d2b upstream.

For real-space designation asces the asce origin part is only a token.
The asce token origin must not be used to generate an effective
address for storage references. This however is erroneously done
within kvm_s390_shadow_tables().

Furthermore within the same function the wrong parts of virtual
addresses are used to generate a corresponding real address
(e.g. the region second index is used as region first index).

Both of the above can result in incorrect address translations. Only
for real space designations with a token origin of zero and addresses
below one megabyte the translation was correct.

Furthermore replace a "!asce.r" statement with a "!*fake" statement to
make it more obvious that a specific condition has nothing to do with
the architecture, but with the fake handling of real space designations.

Fixes: 3218f7094b6b ("s390/mm: support real-space for gmap shadows")
Cc: David Hildenbrand 
Signed-off-by: Heiko Carstens 
Reviewed-by: Martin Schwidefsky 
Signed-off-by: Christian Borntraeger 
Signed-off-by: Greg Kroah-Hartman

perf/x86/intel: Add 1G DTLB load/store miss support for SKL

2017-06-29T11:00:28+00:00

commit fb3a5055cd7098f8d1dd0cd38d7172211113255f upstream.

Current DTLB load/store miss events (0x608/0x649) only counts 4K,2M and
4M page size.
Need to extend the events to support any page size (4K/2M/4M/1G).

The complete DTLB load/store miss events are:

  DTLB_LOAD_MISSES.WALK_COMPLETED		0xe08
  DTLB_STORE_MISSES.WALK_COMPLETED		0xe49

Signed-off-by: Kan Liang 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20170619142609.11058-1-kan.liang@intel.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

powerpc/perf: Fix oops when kthread execs user process

2017-06-29T11:00:28+00:00

commit bf05fc25f268cd62f147f368fe65ad3e5b04fe9f upstream.

When a kthread calls call_usermodehelper() the steps are:
  1. allocate current->mm
  2. load_elf_binary()
  3. populate current->thread.regs

While doing this, interrupts are not disabled. If there is a perf
interrupt in the middle of this process (i.e. step 1 has completed
but not yet reached to step 3) and if perf tries to read userspace
regs, kernel oops with following log:

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc0000000000da0fc
  ...
  Call Trace:
  perf_output_sample_regs+0x6c/0xd0
  perf_output_sample+0x4e4/0x830
  perf_event_output_forward+0x64/0x90
  __perf_event_overflow+0x8c/0x1e0
  record_and_restart+0x220/0x5c0
  perf_event_interrupt+0x2d8/0x4d0
  performance_monitor_exception+0x54/0x70
  performance_monitor_common+0x158/0x160
  --- interrupt: f01 at avtab_search_node+0x150/0x1a0
      LR = avtab_search_node+0x100/0x1a0
  ...
  load_elf_binary+0x6e8/0x15a0
  search_binary_handler+0xe8/0x290
  do_execveat_common.isra.14+0x5f4/0x840
  call_usermodehelper_exec_async+0x170/0x210
  ret_from_kernel_thread+0x5c/0x7c

Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace
pt_regs are not set.

Fixes: ed4a4ef85cf5 ("powerpc/perf: Add support for sampling interrupt register state")
Signed-off-by: Ravi Bangoria 
Acked-by: Naveen N. Rao 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

mm: larger stack guard gap, between vmas

2017-06-24T05:11:18+00:00

commit 1be7107fbe18eed3e319a6c3e83c78254b693acb upstream.

Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.

This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.

Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.

One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications.  For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).

Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.

Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.

Original-patch-by: Oleg Nesterov 
Original-patch-by: Michal Hocko 
Signed-off-by: Hugh Dickins 
Acked-by: Michal Hocko 
Tested-by: Helge Deller  # parisc
Signed-off-by: Linus Torvalds 
[wt: backport to 4.11: adjust context]
[wt: backport to 4.9: adjust context ; kernel doc was not in admin-guide]
Signed-off-by: Willy Tarreau 
Signed-off-by: Greg Kroah-Hartman

MIPS: .its targets depend on vmlinux

2017-06-24T05:11:17+00:00

commit bcd7c45e0d5a82be9a64b90050f0e09d41a50758 upstream.

The .its targets require information about the kernel binary, such as
its entry point, which is extracted from the vmlinux ELF. We therefore
require that the ELF is built before the .its files are generated.
Declare this requirement in the Makefile such that make will ensure this
is always the case, otherwise in corner cases we can hit issues as the
.its is generated with an incorrect (either invalid or stale) entry
point.

Signed-off-by: Paul Burton 
Fixes: cf2a5e0bb4c6 ("MIPS: Support generating Flattened Image Trees (.itb)")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16179/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman