linux-stable.git/arch, branch v4.9.280 Linux kernel stable tree alpha: Send stop IPI to send to online CPUs 2021-08-15T11:01:04+00:00 Prarit Bhargava prarit@redhat.com 2021-01-05T15:16:27+00:00 605ab007767ab46e4dc74a61cf8bb6cf59284116 [ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ]

This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly.  A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled.  I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.

On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.

Send the stop IPI to only the online CPUs.

[1] https://lkml.org/lkml/2020/1/10/250

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest 2021-08-15T11:01:03+00:00 Like Xu likexu@tencent.com 2021-08-02T07:08:50+00:00 16b9d4d718a933eef8a36aed2105ba0c73ea7c78 commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream. If we use "perf record" in an AMD Milan guest, dmesg reports a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx: [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20) [] Call Trace: [] amd_pmu_disable_event+0x22/0x90 [] x86_pmu_stop+0x4c/0xa0 [] x86_pmu_del+0x3a/0x140 The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host, while the guest perf driver should avoid such use. Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled") Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Tested-by: Kim Phillips <kim.phillips@amd.com> Tested-by: Liam Merwick <liam.merwick@oracle.com> Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream.

If we use "perf record" in an AMD Milan guest, dmesg reports a #GP
warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx:

  [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20)
  [] Call Trace:
  []  amd_pmu_disable_event+0x22/0x90
  []  x86_pmu_stop+0x4c/0xa0
  []  x86_pmu_del+0x3a/0x140

The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host,
while the guest perf driver should avoid such use.

Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: Malta: Do not byte-swap accesses to the CBUS UART 2021-08-15T11:01:03+00:00 Maciej W. Rozycki macro@orcam.me.uk 2021-06-26T04:11:13+00:00 d410896e51e82a97cfbd836966f2d09733c7c14a commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream. Correct big-endian accesses to the CBUS UART, a Malta on-board discrete TI16C550C part wired directly to the system controller's device bus, and do not use byte swapping with the 32-bit accesses to the device. The CBUS is used for devices such as the boot flash memory needed early on in system bootstrap even before PCI has been initialised. Therefore it uses the system controller's device bus, which follows the endianness set with the CPU, which means no byte-swapping is ever required for data accesses to CBUS, unlike with PCI. The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and `writel' MMIO accessors, which on the MIPS platform imply byte-swapping with PCI systems. Consequently the wrong byte lane is accessed with the big-endian configuration and the UART is not correctly accessed. As it happens the UPIO_MEM32BE access method makes use of the `ioread32' and `iowrite32' MMIO accessors, which still use `readl' and `writel' respectively, however they byte-swap data passed, effectively cancelling swapping done with the accessors themselves and making it suitable for the CBUS UART. Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then, based on the endianness selected. With this change in place the device is correctly recognised with big-endian Malta at boot, along with the Super I/O devices behind PCI: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence") Cc: stable@vger.kernel.org # v2.6.23+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream.

Correct big-endian accesses to the CBUS UART, a Malta on-board discrete
TI16C550C part wired directly to the system controller's device bus, and
do not use byte swapping with the 32-bit accesses to the device.

The CBUS is used for devices such as the boot flash memory needed early
on in system bootstrap even before PCI has been initialised.  Therefore
it uses the system controller's device bus, which follows the endianness
set with the CPU, which means no byte-swapping is ever required for data
accesses to CBUS, unlike with PCI.

The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and
`writel' MMIO accessors, which on the MIPS platform imply byte-swapping
with PCI systems.  Consequently the wrong byte lane is accessed with the
big-endian configuration and the UART is not correctly accessed.

As it happens the UPIO_MEM32BE access method makes use of the `ioread32'
and `iowrite32' MMIO accessors, which still use `readl' and `writel'
respectively, however they byte-swap data passed, effectively cancelling
swapping done with the accessors themselves and making it suitable for
the CBUS UART.

Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then,
based on the endianness selected.  With this change in place the device
is correctly recognised with big-endian Malta at boot, along with the
Super I/O devices behind PCI:

Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
printk: console [ttyS0] disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
printk: console [ttyS0] enabled
printk: bootconsole [uart8250] disabled
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A

Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence")
Cc: stable@vger.kernel.org # v2.6.23+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mips: Fix non-POSIX regexp 2021-08-15T11:01:01+00:00 H. Nikolaus Schaller hns@goldelico.com 2021-07-08T08:57:10+00:00 6ce348310d9443b53a42c8c29de8714ca2d845f5 [ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ] When cross compiling a MIPS kernel on a BSD based HOSTCC leads to errors like SYNC include/config/auto.conf.cmd - due to: .config egrep: empty (sub)expression UPD include/config/kernel.release HOSTCC scripts/dtc/dtc.o - due to target missing It turns out that egrep uses this egrep pattern: (|MINOR_|PATCHLEVEL_) This is not valid syntax or gives undefined results according to POSIX 9.5.3 ERE Grammar https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html It seems to be silently accepted by the Linux egrep implementation while a BSD host complains. Such patterns can be replaced by a transformation like "(|p1|p2)" -> "(p1|p2)?" Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ]

When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like

  SYNC    include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
  UPD     include/config/kernel.release
  HOSTCC  scripts/dtc/dtc.o - due to target missing

It turns out that egrep uses this egrep pattern:

		(|MINOR_|PATCHLEVEL_)

This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar

	https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html

It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.

Such patterns can be replaced by a transformation like

	"(|p1|p2)" -> "(p1|p2)?"

Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/asm: Ensure asm/proto.h can be included stand-alone 2021-08-04T09:58:03+00:00 Jan Kiszka jan.kiszka@siemens.com 2021-04-11T08:12:16+00:00 9c2c5bb21fa70d8231d3c4f48258ca62af2c5927 [ Upstream commit f7b21a0e41171d22296b897dac6e4c41d2a3643c ] Fix: ../arch/x86/include/asm/proto.h:14:30: warning: ‘struct task_struct’ declared \ inside parameter list will not be visible outside of this definition or declaration long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2); ^~~~~~~~~~~ .../arch/x86/include/asm/proto.h:40:34: warning: ‘struct task_struct’ declared \ inside parameter list will not be visible outside of this definition or declaration long do_arch_prctl_common(struct task_struct *task, int option, ^~~~~~~~~~~ if linux/sched.h hasn't be included previously. This fixes a build error when this header is used outside of the kernel tree. [ bp: Massage commit message. ] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/b76b4be3-cf66-f6b2-9a6c-3e7ef54f9845@web.de Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f7b21a0e41171d22296b897dac6e4c41d2a3643c ]

Fix:

  ../arch/x86/include/asm/proto.h:14:30: warning: ‘struct task_struct’ declared \
    inside parameter list will not be visible outside of this definition or declaration
  long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2);
                               ^~~~~~~~~~~

  .../arch/x86/include/asm/proto.h:40:34: warning: ‘struct task_struct’ declared \
    inside parameter list will not be visible outside of this definition or declaration
   long do_arch_prctl_common(struct task_struct *task, int option,
                                    ^~~~~~~~~~~

if linux/sched.h hasn't be included previously. This fixes a build error
when this header is used outside of the kernel tree.

 [ bp: Massage commit message. ]

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/b76b4be3-cf66-f6b2-9a6c-3e7ef54f9845@web.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/kvm: fix vcpu-id indexed array sizes 2021-08-04T09:58:02+00:00 Juergen Gross jgross@suse.com 2021-07-01T15:41:00+00:00 7e7269ae84944731803823ba0518b381b6442467 commit 76b4f357d0e7d8f6f0013c733e6cba1773c266d3 upstream. KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1 elements. Note that this is currently no real problem, as KVM_MAX_VCPU_ID is an odd number, resulting in always enough padding being available at the end of those arrays. Nevertheless this should be fixed in order to avoid rare problems in case someone is using an even number for KVM_MAX_VCPU_ID. Signed-off-by: Juergen Gross <jgross@suse.com> Message-Id: <20210701154105.23215-2-jgross@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 76b4f357d0e7d8f6f0013c733e6cba1773c266d3 upstream.

KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.

Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.

Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.

Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <20210701154105.23215-2-jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: ensure the signal page contains defined contents 2021-08-04T09:58:02+00:00 Russell King rmk+kernel@armlinux.org.uk 2021-01-29T10:19:07+00:00 aa1b5f2fe4532e99986f1eee2c04bb7d314e3007 commit 9c698bff66ab4914bb3d71da7dc6112519bde23e upstream. Ensure that the signal page contains our poison instruction to increase the protection against ROP attacks and also contains well defined contents. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9c698bff66ab4914bb3d71da7dc6112519bde23e upstream.

Ensure that the signal page contains our poison instruction to increase
the protection against ROP attacks and also contains well defined
contents.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: versatile: Fix up interrupt controller node names 2021-08-04T09:58:02+00:00 Sudeep Holla sudeep.holla@arm.com 2021-07-01T13:21:18+00:00 fdf21153e6b33d57ff28387933776c982fe72218 [ Upstream commit 82a1c67554dff610d6be4e1982c425717b3c6a23 ] Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: 'clear-mask' does not match any of the regexes Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Also drop invalid clear-mask property. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 82a1c67554dff610d6be4e1982c425717b3c6a23 ]

Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:

        arch/arm/boot/dts/versatile-ab.dt.yaml:
        intc@10140000: $nodename:0: 'intc@10140000' does not match
        '^interrupt-controller(@[0-9a-f,]+)*$'

	arch/arm/boot/dts/versatile-ab.dt.yaml:
	intc@10140000: 'clear-mask' does not match any of the regexes

Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow 2021-07-28T07:14:28+00:00 Nicholas Piggin npiggin@gmail.com 2021-07-20T10:43:09+00:00 8c46b4b2749c4b3b7e602403addc32ec2b48baed commit f62f3c20647ebd5fb6ecb8f0b477b9281c44c10a upstream. The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on the rtas_args.nargs that was provided by the guest. That guest nargs value is not range checked, so the guest can cause the host rets pointer to be pointed outside the args array. The individual rtas function handlers check the nargs and nrets values to ensure they are correct, but if they are not, the handlers store a -3 (0xfffffffd) failure indication in rets[0] which corrupts host memory. Fix this by testing up front whether the guest supplied nargs and nret would exceed the array size, and fail the hcall directly without storing a failure indication to rets[0]. Also expand on a comment about why we kill the guest and try not to return errors directly if we have a valid rets[0] pointer. Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls") Cc: stable@vger.kernel.org # v3.10+ Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f62f3c20647ebd5fb6ecb8f0b477b9281c44c10a upstream.

The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.

Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].

Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.

Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390/ftrace: fix ftrace_update_ftrace_func implementation 2021-07-28T07:14:28+00:00 Vasily Gorbik gor@linux.ibm.com 2021-06-25T21:50:07+00:00 c1b136b7ae1b5aa0b7f18d4e253b7de9a0a4599a commit f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream. s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected. At the same time implementation of ftrace_caller is not compliant with HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of ftrace_update_ftrace_func() and calls ftrace_trace_function() directly. The subtle difference is that during ftrace code patching ftrace replaces function tracer via ftrace_update_ftrace_func() and activates it back afterwards. Unexpected direct calls to ftrace_trace_function() during ftrace code patching leads to nullptr-dereferences when tracing is activated for one of functions which are used during code patching. Those function currently are: copy_from_kernel_nofault() copy_from_kernel_nofault_allowed() preempt_count_sub() [with debug_defconfig] preempt_count_add() [with debug_defconfig] Corresponding KASAN report: BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0 Read of size 4 at addr 0000000000001e08 by task migration/0/15 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d Hardware name: IBM 3906 M04 704 (LPAR) Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218 Call Trace: [<0000000001f77caa>] show_stack+0x16a/0x1d0 [<0000000001f8de42>] dump_stack+0x15a/0x1b0 [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0 [<000000000082b0ca>] kasan_report+0x152/0x1c0 [<00000000004cfd8e>] function_trace_call+0x316/0x3b0 [<0000000001fb7082>] ftrace_caller+0x7a/0x7e [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10 [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0 [<000000000014605c>] ftrace_make_call+0xb4/0x1f8 [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8 [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0 [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78 [<000000000042395c>] multi_cpu_stop+0x224/0x3e0 [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0 [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708 [<00000000002329ea>] kthread+0x342/0x408 [<00000000001066b2>] __ret_from_fork+0x92/0xf0 [<0000000001fb57fa>] ret_from_fork+0xa/0x30 The buggy address belongs to the page: page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff) raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ^ 0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ================================================================== To fix that introduce ftrace_func callback to be called from ftrace_caller and update it in ftrace_update_ftrace_func(). Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions") Cc: stable@vger.kernel.org Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream.

s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected.
At the same time implementation of ftrace_caller is not compliant with
HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of
ftrace_update_ftrace_func() and calls ftrace_trace_function() directly.

The subtle difference is that during ftrace code patching ftrace
replaces function tracer via ftrace_update_ftrace_func() and activates
it back afterwards. Unexpected direct calls to ftrace_trace_function()
during ftrace code patching leads to nullptr-dereferences when tracing
is activated for one of functions which are used during code patching.
Those function currently are:
copy_from_kernel_nofault()
copy_from_kernel_nofault_allowed()
preempt_count_sub() [with debug_defconfig]
preempt_count_add() [with debug_defconfig]

Corresponding KASAN report:
 BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0
 Read of size 4 at addr 0000000000001e08 by task migration/0/15

 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d
 Hardware name: IBM 3906 M04 704 (LPAR)
 Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218
 Call Trace:
  [<0000000001f77caa>] show_stack+0x16a/0x1d0
  [<0000000001f8de42>] dump_stack+0x15a/0x1b0
  [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0
  [<000000000082b0ca>] kasan_report+0x152/0x1c0
  [<00000000004cfd8e>] function_trace_call+0x316/0x3b0
  [<0000000001fb7082>] ftrace_caller+0x7a/0x7e
  [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10
  [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0
  [<000000000014605c>] ftrace_make_call+0xb4/0x1f8
  [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8
  [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0
  [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78
  [<000000000042395c>] multi_cpu_stop+0x224/0x3e0
  [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0
  [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708
  [<00000000002329ea>] kthread+0x342/0x408
  [<00000000001066b2>] __ret_from_fork+0x92/0xf0
  [<0000000001fb57fa>] ret_from_fork+0xa/0x30

 The buggy address belongs to the page:
 page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1
 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff)
 raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000
 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
                       ^
  0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 ==================================================================

To fix that introduce ftrace_func callback to be called from
ftrace_caller and update it in ftrace_update_ftrace_func().

Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>