linux-stable.git/arch, branch v4.5.2 Linux kernel stable tree arm64: replace read_lock to rcu lock in call_step_hook 2016-04-20T06:45:26+00:00 Yang Shi yang.shi@linaro.org 2016-02-08T22:49:24+00:00 c8ed22517f6e7e0c2737c08220175d6e7ff564ed commit cf0a25436f05753aca5151891aea4fd130556e2a upstream. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 128, pid: 383, name: sh Preemption disabled at:[<ffff800000124c18>] kgdb_cpu_enter+0x158/0x6b8 CPU: 3 PID: 383 Comm: sh Tainted: G W 4.1.13-rt13 #2 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: [<ffff8000000885e8>] dump_backtrace+0x0/0x128 [<ffff800000088734>] show_stack+0x24/0x30 [<ffff80000079a7c4>] dump_stack+0x80/0xa0 [<ffff8000000bd324>] ___might_sleep+0x18c/0x1a0 [<ffff8000007a20ac>] __rt_spin_lock+0x2c/0x40 [<ffff8000007a2268>] rt_read_lock+0x40/0x58 [<ffff800000085328>] single_step_handler+0x38/0xd8 [<ffff800000082368>] do_debug_exception+0x58/0xb8 Exception stack(0xffff80834a1e7c80 to 0xffff80834a1e7da0) 7c80: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7e40 ffff8083 001bfcc4 ffff8000 7ca0: f2000400 00000000 00000000 00000000 4a1e7d80 ffff8083 0049501c ffff8000 7cc0: 00005402 00000000 00aaa210 ffff8000 4a1e7ea0 ffff8083 000833f4 ffff8000 7ce0: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7ea0 ffff8083 001bfcc0 ffff8000 7d00: 4a0fc400 ffff8083 00005402 00000000 4a1e7d40 ffff8083 00490324 ffff8000 7d20: ffffff9c 00000000 92c23ba0 0000ffff 000a0000 00000000 00000000 00000000 7d40: 00000008 00000000 00080000 00000000 92c23b8b 0000ffff 92c23b8e 0000ffff 7d60: 00000038 00000000 00001cb2 00000000 00000005 00000000 92d7b498 0000ffff 7d80: 01010101 01010101 92be9000 0000ffff 00000000 00000000 00000030 00000000 [<ffff8000000833f4>] el1_dbg+0x18/0x6c This issue is similar with 62c6c61("arm64: replace read_lock to rcu lock in call_break_hook"), but comes to single_step_handler. This also solves kgdbts boot test silent hang issue on 4.4 -rt kernel. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cf0a25436f05753aca5151891aea4fd130556e2a upstream.

BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
in_atomic(): 1, irqs_disabled(): 128, pid: 383, name: sh
Preemption disabled at:[<ffff800000124c18>] kgdb_cpu_enter+0x158/0x6b8

CPU: 3 PID: 383 Comm: sh Tainted: G        W       4.1.13-rt13 #2
Hardware name: Freescale Layerscape 2085a RDB Board (DT)
Call trace:
[<ffff8000000885e8>] dump_backtrace+0x0/0x128
[<ffff800000088734>] show_stack+0x24/0x30
[<ffff80000079a7c4>] dump_stack+0x80/0xa0
[<ffff8000000bd324>] ___might_sleep+0x18c/0x1a0
[<ffff8000007a20ac>] __rt_spin_lock+0x2c/0x40
[<ffff8000007a2268>] rt_read_lock+0x40/0x58
[<ffff800000085328>] single_step_handler+0x38/0xd8
[<ffff800000082368>] do_debug_exception+0x58/0xb8
Exception stack(0xffff80834a1e7c80 to 0xffff80834a1e7da0)
7c80: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7e40 ffff8083 001bfcc4 ffff8000
7ca0: f2000400 00000000 00000000 00000000 4a1e7d80 ffff8083 0049501c ffff8000
7cc0: 00005402 00000000 00aaa210 ffff8000 4a1e7ea0 ffff8083 000833f4 ffff8000
7ce0: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7ea0 ffff8083 001bfcc0 ffff8000
7d00: 4a0fc400 ffff8083 00005402 00000000 4a1e7d40 ffff8083 00490324 ffff8000
7d20: ffffff9c 00000000 92c23ba0 0000ffff 000a0000 00000000 00000000 00000000
7d40: 00000008 00000000 00080000 00000000 92c23b8b 0000ffff 92c23b8e 0000ffff
7d60: 00000038 00000000 00001cb2 00000000 00000005 00000000 92d7b498 0000ffff
7d80: 01010101 01010101 92be9000 0000ffff 00000000 00000000 00000030 00000000
[<ffff8000000833f4>] el1_dbg+0x18/0x6c

This issue is similar with 62c6c61("arm64: replace read_lock to rcu lock in
call_break_hook"), but comes to single_step_handler.

This also solves kgdbts boot test silent hang issue on 4.4 -rt kernel.

Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 8550/1: protect idiv patching against undefined gcc behavior 2016-04-20T06:45:23+00:00 Nicolas Pitre nicolas.pitre@linaro.org 2016-03-14T01:55:45+00:00 fdc0a7733accb6bddf5c636afafeb5feb0a748ab commit 208fae5c3b9431013ad7bcea07cbcee114e7d163 upstream. It was reported that a kernel with CONFIG_ARM_PATCH_IDIV=y stopped booting when compiled with the upcoming gcc 6. Turns out that turning a function address into a writable array is undefined and gcc 6 decided it was OK to omit the store to the first word of the function while still preserving the store to the second word. Even though gcc 6 is now fixed to behave more coherently, it is a mystery that gcc 4 and gcc 5 actually produce wanted code in the kernel. And in fact the reduced test case to illustrate the issue does indeed break with gcc < 6 as well. In any case, let's guard the kernel against undefined compiler behavior by hiding the nature of the array location as suggested by gcc developers. Reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70128 Signed-off-by: Nicolas Pitre <nico@linaro.org> Reported-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 208fae5c3b9431013ad7bcea07cbcee114e7d163 upstream.

It was reported that a kernel with CONFIG_ARM_PATCH_IDIV=y stopped
booting when compiled with the upcoming gcc 6.  Turns out that turning
a function address into a writable array is undefined and gcc 6 decided
it was OK to omit the store to the first word of the function while
still preserving the store to the second word.

Even though gcc 6 is now fixed to behave more coherently, it is a
mystery that gcc 4 and gcc 5 actually produce wanted code in the kernel.
And in fact the reduced test case to illustrate the issue does indeed
break with gcc < 6 as well.

In any case, let's guard the kernel against undefined compiler behavior
by hiding the nature of the array location as suggested by gcc
developers.

Reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70128

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pcmcia: db1xxx_ss: fix last irq_to_gpio user 2016-04-20T06:45:21+00:00 Manuel Lauss manuel.lauss@gmail.com 2016-03-02T09:34:43+00:00 1f1b1ba81ea124e4ba1d00644d1425da78336a5a commit e34b6fcf9b09ec9d93503edd5f81489791ffd602 upstream. remove the usage of removed irq_to_gpio() function. On pre-DB1200 boards, pass the actual carddetect GPIO number instead of the IRQ, because we need the gpio to actually test card status (inserted or not) and can get the irq number with gpio_to_irq() instead. Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500, which used irq_to_gpio(). Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h") Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-pcmcia@lists.infradead.org Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/12747/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e34b6fcf9b09ec9d93503edd5f81489791ffd602 upstream.

remove the usage of removed irq_to_gpio() function.  On pre-DB1200
boards, pass the actual carddetect GPIO number instead of the IRQ,
because we need the gpio to actually test card status (inserted or
not) and can get the irq number with gpio_to_irq() instead.

Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500,
which used irq_to_gpio().

Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h")
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-pcmcia@lists.infradead.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/12747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: Fix MSA ld unaligned failure cases 2016-04-20T06:45:19+00:00 Paul Burton paul.burton@imgtec.com 2016-02-03T03:35:49+00:00 255ad7b0fbd66ee34437d550bac5c4554315fad6 commit fa8ff601d72bad3078ddf5ef17a5547700d06908 upstream. Copying the content of an MSA vector from user memory may involve TLB faults & mapping in pages. This will fail when preemption is disabled due to an inability to acquire mmap_sem from do_page_fault, which meant such vector loads to unmapped pages would always fail to be emulated. Fix this by disabling preemption later only around the updating of vector register state. This change does however introduce a race between performing the load into thread context & the thread being preempted, saving its current live context & clobbering the loaded value. This should be a rare occureence, so optimise for the fast path by simply repeating the load if we are preempted. Additionally if the copy failed then the failure path was taken with preemption left disabled, leading to the kernel typically encountering further issues around sleeping whilst atomic. The change to where preemption is disabled avoids this issue. Fixes: e4aa1f153add "MIPS: MSA unaligned memory access support" Reported-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12345/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fa8ff601d72bad3078ddf5ef17a5547700d06908 upstream.

Copying the content of an MSA vector from user memory may involve TLB
faults & mapping in pages. This will fail when preemption is disabled
due to an inability to acquire mmap_sem from do_page_fault, which meant
such vector loads to unmapped pages would always fail to be emulated.
Fix this by disabling preemption later only around the updating of
vector register state.

This change does however introduce a race between performing the load
into thread context & the thread being preempted, saving its current
live context & clobbering the loaded value. This should be a rare
occureence, so optimise for the fast path by simply repeating the load if
we are preempted.

Additionally if the copy failed then the failure path was taken with
preemption left disabled, leading to the kernel typically encountering
further issues around sleeping whilst atomic. The change to where
preemption is disabled avoids this issue.

Fixes: e4aa1f153add "MIPS: MSA unaligned memory access support"
Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: x86: reduce default value of halt_poll_ns parameter 2016-04-20T06:45:18+00:00 Paolo Bonzini pbonzini@redhat.com 2016-03-29T15:56:57+00:00 62f6c6ff167df2da0b15012707602233eb22e8ef commit 14ebda3394fd3e5388747e742e510b0802a65d24 upstream. Windows lets applications choose the frequency of the timer tick, and in Windows 10 the maximum rate was changed from 1024 Hz to 2048 Hz. Unfortunately, because of the way the Windows API works, most applications who need a higher rate than the default 64 Hz will just do timeGetDevCaps(&tc, sizeof(tc)); timeBeginPeriod(tc.wPeriodMin); and pick the maximum rate. This causes very high CPU usage when playing media or games on Windows 10, even if the guest does not actually use the CPU very much, because the frequent timer tick causes halt_poll_ns to kick in. There is no really good solution, especially because Microsoft could sooner or later bump the limit to 4096 Hz, but for now the best we can do is lower a bit the upper limit for halt_poll_ns. :-( Reported-by: Jon Panozzo <jonp@lime-technology.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 14ebda3394fd3e5388747e742e510b0802a65d24 upstream.

Windows lets applications choose the frequency of the timer tick,
and in Windows 10 the maximum rate was changed from 1024 Hz to
2048 Hz.  Unfortunately, because of the way the Windows API
works, most applications who need a higher rate than the default
64 Hz will just do

   timeGetDevCaps(&tc, sizeof(tc));
   timeBeginPeriod(tc.wPeriodMin);

and pick the maximum rate.  This causes very high CPU usage when
playing media or games on Windows 10, even if the guest does not
actually use the CPU very much, because the frequent timer tick
causes halt_poll_ns to kick in.

There is no really good solution, especially because Microsoft
could sooner or later bump the limit to 4096 Hz, but for now
the best we can do is lower a bit the upper limit for
halt_poll_ns. :-(

Reported-by: Jon Panozzo <jonp@lime-technology.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: x86: Inject pending interrupt even if pending nmi exist 2016-04-20T06:45:18+00:00 Yuki Shibuya shibuya.yk@ncos.nec.co.jp 2016-03-24T05:17:03+00:00 4680eb3978ba46bdf3be74d85b9a736468ad1c70 commit 321c5658c5e9192dea0d58ab67cf1791e45b2b26 upstream. Non maskable interrupts (NMI) are preferred to interrupts in current implementation. If a NMI is pending and NMI is blocked by the result of nmi_allowed(), pending interrupt is not injected and enable_irq_window() is not executed, even if interrupts injection is allowed. In old kernel (e.g. 2.6.32), schedule() is often called in NMI context. In this case, interrupts are needed to execute iret that intends end of NMI. The flag of blocking new NMI is not cleared until the guest execute the iret, and interrupts are blocked by pending NMI. Due to this, iret can't be invoked in the guest, and the guest is starved until block is cleared by some events (e.g. canceling injection). This patch injects pending interrupts, when it's allowed, even if NMI is blocked. And, If an interrupts is pending after executing inject_pending_event(), enable_irq_window() is executed regardless of NMI pending counter. Signed-off-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 321c5658c5e9192dea0d58ab67cf1791e45b2b26 upstream.

Non maskable interrupts (NMI) are preferred to interrupts in current
implementation. If a NMI is pending and NMI is blocked by the result
of nmi_allowed(), pending interrupt is not injected and
enable_irq_window() is not executed, even if interrupts injection is
allowed.

In old kernel (e.g. 2.6.32), schedule() is often called in NMI context.
In this case, interrupts are needed to execute iret that intends end
of NMI. The flag of blocking new NMI is not cleared until the guest
execute the iret, and interrupts are blocked by pending NMI. Due to
this, iret can't be invoked in the guest, and the guest is starved
until block is cleared by some events (e.g. canceling injection).

This patch injects pending interrupts, when it's allowed, even if NMI
is blocked. And, If an interrupts is pending after executing
inject_pending_event(), enable_irq_window() is executed regardless of
NMI pending counter.

Signed-off-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arm64: opcodes.h: Add arm big-endian config options before including arm header 2016-04-20T06:45:08+00:00 James Morse james.morse@arm.com 2016-03-24T16:54:34+00:00 37c536c3ee72b847426034d6619bb12f173c5e23 commit a6002ec5a8c68e69706b2efd6db6d682d0ab672c upstream. arm and arm64 use different config options to specify big endian. This needs taking into account when including code/headers between the two architectures. A case in point is PAN, which uses the __instr_arm() macro to output instructions. The macro comes from opcodes.h, which lives under arch/arm. On a big-endian build the mismatched config options mean the instruction isn't byte swapped correctly, resulting in undefined instruction exceptions during boot: | alternatives: patching kernel code | kdevtmpfs[87]: undefined instruction: pc=ffffffc0004505b4 | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | Internal error: Oops - undefined instruction: 0 [#1] SMP | Modules linked in: | CPU: 0 PID: 87 Comm: kdevtmpfs Not tainted 4.1.16+ #5 | Hardware name: Hisilicon PhosphorHi1382 EVB (DT) | task: ffffffc336591700 ti: ffffffc3365a4000 task.ti: ffffffc3365a4000 | PC is at dump_instr+0x68/0x100 | LR is at do_undefinstr+0x1d4/0x2a4 | pc : [<ffffffc00076231c>] lr : [<ffffffc0000811d4>] pstate: 604001c5 | sp : ffffffc3365a6450 Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Xuefeng Wang <wxf.wang@hisilicon.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a6002ec5a8c68e69706b2efd6db6d682d0ab672c upstream.

arm and arm64 use different config options to specify big endian. This
needs taking into account when including code/headers between the two
architectures.

A case in point is PAN, which uses the __instr_arm() macro to output
instructions. The macro comes from opcodes.h, which lives under arch/arm.
On a big-endian build the mismatched config options mean the instruction
isn't byte swapped correctly, resulting in undefined instruction exceptions
during boot:

| alternatives: patching kernel code
| kdevtmpfs[87]: undefined instruction: pc=ffffffc0004505b4
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| Internal error: Oops - undefined instruction: 0 [#1] SMP
| Modules linked in:
| CPU: 0 PID: 87 Comm: kdevtmpfs Not tainted 4.1.16+ #5
| Hardware name: Hisilicon PhosphorHi1382 EVB (DT)
| task: ffffffc336591700 ti: ffffffc3365a4000 task.ti: ffffffc3365a4000
| PC is at dump_instr+0x68/0x100
| LR is at do_undefinstr+0x1d4/0x2a4
| pc : [<ffffffc00076231c>] lr : [<ffffffc0000811d4>] pstate: 604001c5
| sp : ffffffc3365a6450

Reported-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Xuefeng Wang <wxf.wang@hisilicon.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/process: Fix altivec SPR not being saved 2016-04-20T06:45:08+00:00 Oliver O'Halloran oohall@gmail.com 2016-03-07T22:08:47+00:00 0c4d3fbe16cb7241cc18bc4b8a121d5c5ea6d4b6 commit 01d7c2a2de47890934faba91a71d183795e4348d upstream. In save_sprs() in process.c contains the following test: if (cpu_has_feature(cpu_has_feature(CPU_FTR_ALTIVEC))) t->vrsave = mfspr(SPRN_VRSAVE); CPU feature with the mask 0x1 is CPU_FTR_COHERENT_ICACHE so the test is equivilent to: if (cpu_has_feature(CPU_FTR_ALTIVEC) && cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) On CPUs without support for both (i.e G5) this results in vrsave not being saved between context switches. The vector register save/restore code doesn't use VRSAVE to determine which registers to save/restore, but the value of VRSAVE is used to determine if altivec is being used in several code paths. Fixes: 152d523e6307 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 01d7c2a2de47890934faba91a71d183795e4348d upstream.

In save_sprs() in process.c contains the following test:

	if (cpu_has_feature(cpu_has_feature(CPU_FTR_ALTIVEC)))
		t->vrsave = mfspr(SPRN_VRSAVE);

CPU feature with the mask 0x1 is CPU_FTR_COHERENT_ICACHE so the test
is equivilent to:

	if (cpu_has_feature(CPU_FTR_ALTIVEC) &&
		cpu_has_feature(CPU_FTR_COHERENT_ICACHE))

On CPUs without support for both (i.e G5) this results in vrsave not
being saved between context switches. The vector register save/restore
code doesn't use VRSAVE to determine which registers to save/restore,
but the value of VRSAVE is used to determine if altivec is being used
in several code paths.

Fixes: 152d523e6307 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390/mm: handle PTE-mapped tail pages in fast gup 2016-04-20T06:45:07+00:00 Gerald Schaefer gerald.schaefer@de.ibm.com 2016-03-17T14:00:04+00:00 37828ff8b8d1437a0165c6373608d7715bb63fc9 commit fc897c95e91451271cd707ee0f71022b9b201ce9 upstream. With the THP refcounting rework it is possible to see THP compound tail pages mapped with PTEs during a THP split. This needs to be considered when using page_cache_get_speculative(), which will always fail on tail pages because ->_count is always zero. commit 7aef4172 "mm: handle PTE-mapped tail pages in gerneric fast gup implementaiton" fixed it for the generic fast gup code by using compound_head(page) instead of page, but not for s390. This patch is a 1:1 adaption of commit 7aef4172 for the s390 fast gup code. Without this fix, gup will fall back to the slow path or fail in the unlikely scenario that we hit a THP under splitting in-between the page table split and the compound page split. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc897c95e91451271cd707ee0f71022b9b201ce9 upstream.

With the THP refcounting rework it is possible to see THP compound tail
pages mapped with PTEs during a THP split. This needs to be considered
when using page_cache_get_speculative(), which will always fail on tail
pages because ->_count is always zero. commit 7aef4172 "mm: handle
PTE-mapped tail pages in gerneric fast gup implementaiton" fixed it for
the generic fast gup code by using compound_head(page) instead of page,
but not for s390.

This patch is a 1:1 adaption of commit 7aef4172 for the s390 fast gup
code. Without this fix, gup will fall back to the slow path or fail
in the unlikely scenario that we hit a THP under splitting in-between
the page table split and the compound page split.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/mm: Fixup preempt underflow with huge pages 2016-04-20T06:45:07+00:00 Sebastian Siewior bigeasy@linutronix.de 2016-03-08T09:03:56+00:00 0e345ced4b17c379dc91f8117e920fd40fa9f06f commit 08a5bb2921e490939f78f38fd0d02858bb709942 upstream. hugepd_free() used __get_cpu_var() once. Nothing ensured that the code accessing the variable did not migrate from one CPU to another and soon this was noticed by Tiejun Chen in 94b09d755462 ("powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var"). So we had it fixed. Christoph Lameter was doing his __get_cpu_var() replaces and forgot PowerPC. Then he noticed this and sent his fixed up batch again which got applied as 69111bac42f5 ("powerpc: Replace __get_cpu_var uses"). The careful reader will noticed one little detail: get_cpu_var() got replaced with this_cpu_ptr(). So now we have a put_cpu_var() which does a preempt_enable() and nothing that does preempt_disable() so we underflow the preempt counter. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 08a5bb2921e490939f78f38fd0d02858bb709942 upstream.

hugepd_free() used __get_cpu_var() once. Nothing ensured that the code
accessing the variable did not migrate from one CPU to another and soon
this was noticed by Tiejun Chen in 94b09d755462 ("powerpc/hugetlb:
Replace __get_cpu_var with get_cpu_var"). So we had it fixed.

Christoph Lameter was doing his __get_cpu_var() replaces and forgot
PowerPC. Then he noticed this and sent his fixed up batch again which
got applied as 69111bac42f5 ("powerpc: Replace __get_cpu_var uses").

The careful reader will noticed one little detail: get_cpu_var() got
replaced with this_cpu_ptr(). So now we have a put_cpu_var() which does
a preempt_enable() and nothing that does preempt_disable() so we
underflow the preempt counter.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>