commit 35509737c8f958944e059d501255a0bf18361ba0 upstream. The PL310 Auxiliary Control Register shouldn't have the "Full line of zero" optimization bit being set before L2 cache is enabled. The L2X0 driver takes care of enabling the optimization by itself. This patch fixes a noisy error message on Tegra20 and Tegra30 telling that cache optimization is erroneously enabled without enabling it for the CPU: L2C-310: enabling full line of zeros but not enabled in Cortex-A9 Cc: <stable@vger.kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf51e129b96847f969bfb8af1ee1516a01a70b39 upstream. It needs access_process_vm() if the traced process does not share mm with the caller. Solution is similar to what sparc64 does. Note that genregs32_set() is only ever called with pos being 0 or 32 * sizeof(u32) (the latter - as part of PTRACE_SETREGS handling). Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 31e1b3efa802f97a17628dde280006c4cee4ce5e ] Register "a1" is unsaved in this function, when CONFIG_TRACE_IRQFLAGS is enabled, the TRACE_IRQS_OFF macro will call trace_hardirqs_off(), and this may change register "a1". The changed register "a1" as argument will be send to do_fpe() and do_msa_fpe(). Signed-off-by: YuanJunQing <yuanjunqing66@163.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ]
There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache().
This avoids a boot crash which appeared in v5.4.
printk: console [ttyS0] enabled
printk: bootconsole [debug0] disabled
printk: bootconsole [debug0] disabled
Calibrating delay loop... 9.61 BogoMIPS (lpj=48064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered protocol family 16
Data read fault at 0x00000000 in Super Data (pc=0x8a6a)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [<00008a6a>] via_flush_cache+0x12/0x2c
SR: 2700 SP: 01c1fe3c a2: 01c24000
d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f
d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000
Process swapper (pid: 1, task=01c24000)
Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0
baddr=00008a6e dibuf=0000004e ver=f
Stack from 01c1fec4:
01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40
01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000
00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2
00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88
004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4
0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000
Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c
[<00010080>] fix_dnrm+0x2/0x18
[<0000792e>] cache_push+0x46/0x5a
[<00006b40>] arch_dma_prep_coherent+0x60/0x6e
[<00040000>] switched_to_dl+0x76/0xd0
[<004a545e>] dma_atomic_pool_init+0x4e/0x188
[<00040000>] switched_to_dl+0x76/0xd0
[<00033b92>] parse_args+0x0/0x370
[<004a5410>] dma_atomic_pool_init+0x0/0x188
[<000021e2>] do_one_initcall+0x34/0x1be
[<00033b92>] parse_args+0x0/0x370
[<0038507a>] strcpy+0x0/0x1e
[<000021ae>] do_one_initcall+0x0/0x1be
[<00020002>] do_proc_dointvec_conv+0x54/0x74
[<0049f938>] kernel_init_freeable+0x126/0x190
[<0049f94c>] kernel_init_freeable+0x13a/0x190
[<004a5410>] dma_atomic_pool_init+0x0/0x188
[<00041798>] complete+0x0/0x3c
[<000b9b0c>] kfree+0x0/0x20a
[<0038df98>] schedule+0x0/0xd0
[<0038d604>] kernel_init+0x0/0xda
[<0038d610>] kernel_init+0xc/0xda
[<0038d604>] kernel_init+0x0/0xda
[<00002d38>] ret_from_kernel_thread+0xc/0x14
Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Thanks to Stan Johnson for capturing the console log and running git
bisect.
Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make
dma_atomic_pool_init self-contained") is the first "bad" commit. I don't
know why. Perhaps mach_l2_flush first became reachable with that commit.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67d631b7c05eff955ccff4139327f0f92a5117e5 ] This currently leaks kernel physical addresses into userspace. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Link: https://lkml.kernel.org/r/20200229231120.1147527-1-nivedita@alum.mit.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed26aacfb5f71eecb20a51c4467da440cb719d66 ] Loops-per-jiffies is a special number which represents a number of noop-loop cycles per CPU-scheduler quantum - jiffies. As you understand aside from CPU-specific implementation it depends on the CPU frequency. So when a platform has the CPU frequency fixed, we have no problem and the current udelay interface will work just fine. But as soon as CPU-freq driver is enabled and the cores frequency changes, we'll end up with distorted udelay's. In order to fix this we have to accordinly adjust the per-CPU udelay_val (the same as the global loops_per_jiffy) number. This can be done in the CPU-freq transition event handler. We subscribe to that event in the MIPS arch time-inititalization method. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a0efb8b101665a843205eab3d67ab09cb2d9a8d ]
Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.
Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88413a6bfbbe2f648df399b62f85c934460b7a4d ]
Currently, we may perform a copy_to_user (through
simple_read_from_buffer()) while holding a context's register_lock,
while accessing the context save area.
This change uses a temporary buffer for the context save area data,
which we then pass to simple_read_from_buffer.
Includes changes from Christoph Hellwig <hch@lst.de>.
Fixes: bf1ab978be23 ("[POWERPC] coredump: Add SPU elf notes to coredump.")
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[hch: renamed to function to avoid ___-prefixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 269b3a9ac538c4ae87f84be640b9fa89914a2489 ]
In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.
(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
swiotlb_init(1);
}
kernel/dma/swiotlb.c
void __init
swiotlb_init(int verbose)
{
...
vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
return;
...
pr_warn("Cannot allocate buffer");
no_iotlb_memory = true;
}
phys_addr_t swiotlb_tbl_map_single()
{
...
if (no_iotlb_memory)
panic("Can not allocate SWIOTLB buffer earlier ...");
...
}
(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
if (!octeon_swiotlb)
panic("%s: Failed to allocate %zu bytes align=%lx\n",
__func__, swiotlbsize, PAGE_SIZE);
...
}
Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.
In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.
Reported-by: Juxin Gao <gaojuxin@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ] Recent work with KASan exposed the folling hard-coded bitmask in arch/arm/mm/proc-macros.S: bic rd, sp, #8128 bic rd, rd, #63 This forms the bitmask 0x1FFF that is coinciding with (PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming that THREAD_SIZE is always 8K (8192). As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into this bug. Fix it by this little oneline suggested by Ard: bic rd, sp, #(THREAD_SIZE - 1) & ~63 Where THREAD_SIZE is defined using THREAD_SIZE_ORDER. We have to also include <linux/const.h> since the THREAD_SIZE expands to use the _AC() macro. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>