linux-stable.git/arch, branch v4.19.211

x86/Kconfig: Correct reference to MWINCHIP3D

2021-10-13T08:10:52+00:00

commit 225bac2dc5d192e55f2c50123ee539b1edf8a411 upstream.

Commit in Fixes intended to exclude the Winchip series and referred to
CONFIG_WINCHIP3D, but the config symbol is called CONFIG_MWINCHIP3D.

Hence, scripts/checkkconfigsymbols.py warns:

WINCHIP3D
Referencing files: arch/x86/Kconfig

Correct the reference to the intended config symbol.

Fixes: 69b8d3fcabdc ("x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group")
Suggested-by: Randy Dunlap 
Signed-off-by: Lukas Bulwahn 
Signed-off-by: Borislav Petkov 
Cc: 
Link: https://lkml.kernel.org/r/20210803113531.30720-4-lukas.bulwahn@gmail.com
[manually adjusted the change to the state on the v4.19.y and v5.4.y stable tree]
Signed-off-by: Lukas Bulwahn 
Signed-off-by: Greg Kroah-Hartman

ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence

2021-10-13T08:10:51+00:00

[ Upstream commit 783f3db030563f7bcdfe2d26428af98ea1699a8e ]

Any pending interrupt can prevent entering standby based power off state.
To avoid it, disable the GIC CPU interface.

Fixes: 8148d2136002 ("ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set")
Signed-off-by: Oleksij Rempel 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

powerpc/fsl/dts: Fix phy-connection-type for fm1mac3

2021-10-13T08:10:51+00:00

[ Upstream commit eed183abc0d3b8adb64fd1363b7cea7986cd58d6 ]

Property phy-connection-type contains invalid value "sgmii-2500" per scheme
defined in file ethernet-controller.yaml.

Correct phy-connection-type value should be "2500base-x".

Signed-off-by: Pali Rohár 
Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)")
Acked-by: Scott Wood 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bpf, arm: Fix register clobbering in div/mod implementation

2021-10-13T08:10:51+00:00

[ Upstream commit 79e3445b38e0cab94264a3894c0c3d57c930b97e ]

On ARM CPUs that lack div/mod instructions, ALU32 BPF_DIV and BPF_MOD are
implemented using a call to a helper function. Before, the emitted code
for those function calls failed to preserve caller-saved ARM registers.
Since some of those registers happen to be mapped to BPF registers, it
resulted in eBPF register values being overwritten.

This patch emits code to push and pop the remaining caller-saved ARM
registers r2-r3 into the stack during the div/mod function call. ARM
registers r0-r1 are used as arguments and return value, and those were
already saved and restored correctly.

Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler")
Signed-off-by: Johan Almbladh 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

xtensa: call irqchip_init only when CONFIG_USE_OF is selected

2021-10-13T08:10:51+00:00

[ Upstream commit 6489f8d0e1d93a3603d8dad8125797559e4cf2a2 ]

During boot time kernel configured with OF=y but USE_OF=n displays the
following warnings and hangs shortly after starting userspace:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0
irq_create_mapping_affinity(, 6) called with NULL domain
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
  __warn+0x69/0xc4
  warn_slowpath_fmt+0x6c/0x94
  irq_create_mapping_affinity+0x29/0xc0
  local_timer_setup+0x40/0x88
  time_init+0xb1/0xe8
  start_kernel+0x31d/0x3f4
  _startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35b ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88
error: can't map timer irq
CPU: 0 PID: 0 Comm: swapper Tainted: G        W         5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
  __warn+0x69/0xc4
  warn_slowpath_fmt+0x6c/0x94
  local_timer_setup+0x58/0x88
  time_init+0xb1/0xe8
  start_kernel+0x31d/0x3f4
  _startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35c ]---
Failed to request irq 0 (timer)

Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and
calling legacy interrupt controller init otherwise.

Fixes: da844a81779e ("xtensa: add device trees support")
Signed-off-by: Max Filippov 
Signed-off-by: Sasha Levin

bpf, mips: Validate conditional branch offsets

2021-10-13T08:10:51+00:00

commit 37cb28ec7d3a36a5bace7063a3dba633ab110f8b upstream.

The conditional branch instructions on MIPS use 18-bit signed offsets
allowing for a branch range of 128 KBytes (backward and forward).
However, this limit is not observed by the cBPF JIT compiler, and so
the JIT compiler emits out-of-range branches when translating certain
cBPF programs. A specific example of such a cBPF program is included in
the "BPF_MAXINSNS: exec all MSH" test from lib/test_bpf.c that executes
anomalous machine code containing incorrect branch offsets under JIT.

Furthermore, this issue can be abused to craft undesirable machine
code, where the control flow is hijacked to execute arbitrary Kernel
code.

The following steps can be used to reproduce the issue:

  # echo 1 > /proc/sys/net/core/bpf_jit_enable
  # modprobe test_bpf test_name="BPF_MAXINSNS: exec all MSH"

This should produce multiple warnings from build_bimm() similar to:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 209 at arch/mips/mm/uasm-mips.c:210 build_insn+0x558/0x590
  Micro-assembler field overflow
  Modules linked in: test_bpf(+)
  CPU: 0 PID: 209 Comm: modprobe Not tainted 5.14.3 #1
  Stack : 00000000 807bb824 82b33c9c 801843c0 00000000 00000004 00000000 63c9b5ee
          82b33af4 80999898 80910000 80900000 82fd6030 00000001 82b33a98 82087180
          00000000 00000000 80873b28 00000000 000000fc 82b3394c 00000000 2e34312e
          6d6d6f43 809a180f 809a1836 6f6d203a 80900000 00000001 82b33bac 80900000
          00027f80 00000000 00000000 807bb824 00000000 804ed790 001cc317 00000001
  [...]
  Call Trace:
  [<80108f44>] show_stack+0x38/0x118
  [<807a7aac>] dump_stack_lvl+0x5c/0x7c
  [<807a4b3c>] __warn+0xcc/0x140
  [<807a4c3c>] warn_slowpath_fmt+0x8c/0xb8
  [<8011e198>] build_insn+0x558/0x590
  [<8011e358>] uasm_i_bne+0x20/0x2c
  [<80127b48>] build_body+0xa58/0x2a94
  [<80129c98>] bpf_jit_compile+0x114/0x1e4
  [<80613fc4>] bpf_prepare_filter+0x2ec/0x4e4
  [<8061423c>] bpf_prog_create+0x80/0xc4
  [] test_bpf_init+0x300/0xba8 [test_bpf]
  [<8010051c>] do_one_initcall+0x50/0x1d4
  [<801c5e54>] do_init_module+0x60/0x220
  [<801c8b20>] sys_finit_module+0xc4/0xfc
  [<801144d0>] syscall_common+0x34/0x58
  [...]
  ---[ end trace a287d9742503c645 ]---

Then the anomalous machine code executes:

=> 0xc0a18000:  addiu   sp,sp,-16
   0xc0a18004:  sw      s3,0(sp)
   0xc0a18008:  sw      s4,4(sp)
   0xc0a1800c:  sw      s5,8(sp)
   0xc0a18010:  sw      ra,12(sp)
   0xc0a18014:  move    s5,a0
   0xc0a18018:  move    s4,zero
   0xc0a1801c:  move    s3,zero

   # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
   0xc0a18020:  lui     t6,0x8012
   0xc0a18024:  ori     t4,t6,0x9e14
   0xc0a18028:  li      a1,0
   0xc0a1802c:  jalr    t4
   0xc0a18030:  move    a0,s5
   0xc0a18034:  bnez    v0,0xc0a1ffb8           # incorrect branch offset
   0xc0a18038:  move    v0,zero
   0xc0a1803c:  andi    s4,s3,0xf
   0xc0a18040:  b       0xc0a18048
   0xc0a18044:  sll     s4,s4,0x2
   [...]

   # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
   0xc0a1ffa0:  lui     t6,0x8012
   0xc0a1ffa4:  ori     t4,t6,0x9e14
   0xc0a1ffa8:  li      a1,0
   0xc0a1ffac:  jalr    t4
   0xc0a1ffb0:  move    a0,s5
   0xc0a1ffb4:  bnez    v0,0xc0a1ffb8           # incorrect branch offset
   0xc0a1ffb8:  move    v0,zero
   0xc0a1ffbc:  andi    s4,s3,0xf
   0xc0a1ffc0:  b       0xc0a1ffc8
   0xc0a1ffc4:  sll     s4,s4,0x2

   # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0)
   0xc0a1ffc8:  lui     t6,0x8012
   0xc0a1ffcc:  ori     t4,t6,0x9e14
   0xc0a1ffd0:  li      a1,0
   0xc0a1ffd4:  jalr    t4
   0xc0a1ffd8:  move    a0,s5
   0xc0a1ffdc:  bnez    v0,0xc0a3ffb8           # correct branch offset
   0xc0a1ffe0:  move    v0,zero
   0xc0a1ffe4:  andi    s4,s3,0xf
   0xc0a1ffe8:  b       0xc0a1fff0
   0xc0a1ffec:  sll     s4,s4,0x2
   [...]

   # epilogue
   0xc0a3ffb8:  lw      s3,0(sp)
   0xc0a3ffbc:  lw      s4,4(sp)
   0xc0a3ffc0:  lw      s5,8(sp)
   0xc0a3ffc4:  lw      ra,12(sp)
   0xc0a3ffc8:  addiu   sp,sp,16
   0xc0a3ffcc:  jr      ra
   0xc0a3ffd0:  nop

To mitigate this issue, we assert the branch ranges for each emit call
that could generate an out-of-range branch.

Fixes: 36366e367ee9 ("MIPS: BPF: Restore MIPS32 cBPF JIT")
Fixes: c6610de353da ("MIPS: net: Add BPF JIT")
Signed-off-by: Piotr Krysiuk 
Signed-off-by: Daniel Borkmann 
Tested-by: Johan Almbladh 
Acked-by: Johan Almbladh 
Cc: Paul Burton 
Cc: Thomas Bogendoerfer 
Link: https://lore.kernel.org/bpf/20210915160437.4080-1-piotras@gmail.com
Signed-off-by: Ovidiu Panait 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: qcom: apq8064: use compatible which contains chipid

2021-10-13T08:10:51+00:00

commit f5c03f131dae3f06d08464e6157dd461200f78d9 upstream.

Also resolves these kernel warnings for APQ8064:
adreno 4300000.adreno-3xx: Using legacy qcom,chipid binding!
adreno 4300000.adreno-3xx: Use compatible qcom,adreno-320.2 instead.

Tested on Nexus 7 2013, no functional changes.

Cc: 
Signed-off-by: David Heidelberg 
Link: https://lore.kernel.org/r/20210818065317.19822-1-david@ixit.cz
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: omap3430-sdp: Fix NAND device node

2021-10-13T08:10:51+00:00

commit 80d680fdccba214e8106dc1aa33de5207ad75394 upstream.

Nand is on CS1 so reg properties first field should be 1 not 0.

Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Roger Quadros 
Signed-off-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

sparc64: fix pci_iounmap() when CONFIG_PCI is not set

2021-10-09T12:11:03+00:00

[ Upstream commit d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 ]

Guenter reported [1] that the pci_iounmap() changes remain problematic,
with sparc64 allnoconfig and tinyconfig still not building due to the
header file changes and confusion with the arch-specific pci_iounmap()
implementation.

I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of
doing its own thing, since it turns out that the sparc64 version of
pci_iounmap() is somewhat buggy (see [2]).  But in the meantime, this
just fixes the build by avoiding the trivial re-definition of the empty
case.

Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1]
Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/ [2]
Reported-by: Guenter Roeck 
Cc: David Miller 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE

2021-10-06T13:31:26+00:00

commit 6fa630bf473827aee48cbf0efbbdf6f03134e890 upstream

FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the
latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is
enough for MCOUNT_ADDR).

Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/

Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support")
Reported-by: kernel test robot 
Signed-off-by: Alexander Sverdlin 
Signed-off-by: Russell King 
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman