linux-stable.git/arch, branch v3.4.110

ARM: Fix incorrect backport of 0b59d8806a31

2015-10-22T01:20:08+00:00

Reported-by: Jim Faulkner 
Fixed-by: Nicolas Schichan 
Signed-off-by: Zefan Li

crypto: s390/ghash: Fix incorrect backport of a1cae34e23b1

2015-10-22T01:20:08+00:00

Signed-off-by: Zefan Li

KVM: x86: properly restore LVT0

2015-10-22T01:20:07+00:00

commit db1385624c686fe99fe2d1b61a36e1537b915d08 upstream.

Legacy NMI watchdog didn't work after migration/resume, because
vapics_in_nmi_mode was left at 0.

Signed-off-by: Radim Krčmář 
Signed-off-by: Paolo Bonzini 
[lizf: Backported to 3.4:
 - adjust context
 - s/kvm_apic_get_reg/apic_get_reg/]
Signed-off-by: Zefan Li

KVM: x86: make vapics_in_nmi_mode atomic

2015-10-22T01:20:07+00:00

commit 42720138b06301cc8a7ee8a495a6d021c4b6a9bc upstream.

Writes were a bit racy, but hard to turn into a bug at the same time.
(Particularly because modern Linux doesn't use this feature anymore.)

Signed-off-by: Radim Krčmář 
[Actually the next patch makes it much, much easier to trigger the race
 so I'm including this one for stable@ as well. - Paolo]
Signed-off-by: Paolo Bonzini 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A

2015-10-22T01:20:03+00:00

commit 1dace0116d0b05c967d94644fc4dfe96be2ecd3d upstream.

The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign
resources correctly without the information from _CRS that tells us which
address ranges are claimed by which bridge.  In the bugs mentioned below,
we incorrectly assign a sound card address (this example is from 1033299):

  bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
  ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
  pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored)
  pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
  pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
  ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
  pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored)
  pci 0000:80:01.0: [1106:3288] type 0 class 0x000403
  pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit]
  pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff]
  pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]
  BUG: unable to handle kernel paging request at ffffc90000378000
  IP: [] azx_create+0x37c/0x822 [snd_hda_intel]

We assigned 0xfd_0000_0000, but that is not in any of the host bridge
windows, and the sound card doesn't work.

Turn on pci=use_crs automatically for this system.

Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368
Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Zefan Li

x86, kvm: fix kvm's usage of kernel_fpu_begin/end()

2015-09-18T01:20:46+00:00

commit b1a74bf8212367be2b1d6685c11a84e056eaaaf1 upstream.

Preemption is disabled between kernel_fpu_begin/end() and as such
it is not a good idea to use these routines in kvm_load/put_guest_fpu()
which can be very far apart.

kvm_load/put_guest_fpu() routines are already called with
preemption disabled and KVM already uses the preempt notifier to save
the guest fpu state using kvm_put_guest_fpu().

So introduce __kernel_fpu_begin/end() routines which don't touch
preemption and use them instead of kernel_fpu_begin/end()
for KVM's use model of saving/restoring guest FPU state.

Also with this change (and with eagerFPU model), fix the host cr0.TS vm-exit
state in the case of VMX. For eagerFPU case, host cr0.TS is always clear.
So no need to worry about it. For the traditional lazyFPU restore case,
change the cr0.TS bit for the host state during vm-exit to be always clear
and cr0.TS bit is set in the __vmx_load_host_state() when the FPU
(guest FPU or the host task's FPU) state is not active. This ensures
that the host/guest FPU state is properly saved, restored
during context-switch and with interrupts (using irq_fpu_usable()) not
stomping on the active FPU state.

Signed-off-by: Suresh Siddha 
Link: http://lkml.kernel.org/r/1348164109.26695.338.camel@sbsiddha-desk.sc.intel.com
Cc: Avi Kivity 
Signed-off-by: H. Peter Anvin 
Signed-off-by: Zefan Li 
[xr: Backported to 3.4: Adjust context]
Signed-off-by: Rui Xiang 
Signed-off-by: Zefan Li

x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu()

2015-09-18T01:20:46+00:00

commit 9c1c3fac53378c9782c18f80107965578d7b7167 upstream.

kvm's guest fpu save/restore should be wrapped around
kernel_fpu_begin/end(). This will avoid for example taking a DNA
in kvm_load_guest_fpu() when it tries to load the fpu immediately
after doing unlazy_fpu() on the host side.

More importantly this will prevent the host process fpu from being
corrupted.

Signed-off-by: Suresh Siddha 
Link: http://lkml.kernel.org/r/1345842782-24175-4-git-send-email-suresh.b.siddha@intel.com
Cc: Avi Kivity 
Signed-off-by: H. Peter Anvin 
Cc: Rui Xiang 
Signed-off-by: Zefan Li

MIPS: Fix enabling of DEBUG_STACKOVERFLOW

2015-09-18T01:20:45+00:00

commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.

Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.

Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Adam Jiang 
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle 
Signed-off-by: Zefan Li

x86: bpf_jit: fix compilation of large bpf programs

2015-09-18T01:20:42+00:00

commit 3f7352bf21f8fd7ba3e2fcef9488756f188e12be upstream.

x86 has variable length encoding. x86 JIT compiler is trying
to pick the shortest encoding for given bpf instruction.
While doing so the jump targets are changing, so JIT is doing
multiple passes over the program. Typical program needs 3 passes.
Some very short programs converge with 2 passes. Large programs
may need 4 or 5. But specially crafted bpf programs may hit the
pass limit and if the program converges on the last iteration
the JIT compiler will be producing an image full of 'int 3' insns.
Fix this corner case by doing final iteration over bpf program.

Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Reported-by: Daniel Borkmann 
Signed-off-by: Alexei Starovoitov 
Tested-by: Daniel Borkmann 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

x86/mce: Fix MCE severity messages

2015-09-18T01:20:42+00:00

commit 17fea54bf0ab34fa09a06bbde2f58ed7bbdf9299 upstream.

Derek noticed that a critical MCE gets reported with the wrong
error type description:

  [Hardware Error]: CPU 34: Machine Check Exception: 5 Bank 9: f200003f000100b0
  [Hardware Error]: RIP !INEXACT! 10: {intel_idle+0xb1/0x170}
  [Hardware Error]: TSC 49587b8e321cb
  [Hardware Error]: PROCESSOR 0:306e4 TIME 1431561296 SOCKET 1 APIC 29
  [Hardware Error]: Some CPUs didn't answer in synchronization
  [Hardware Error]: Machine check: Invalid
				   ^^^^^^^

The last line with 'Invalid' should have printed the high level
MCE error type description we get from mce_severity, i.e.
something like:

  [Hardware Error]: Machine check: Action required: data load error in a user process

this happens due to the fact that mce_no_way_out() iterates over
all MCA banks and possibly overwrites the @msg argument which is
used in the panic printing later.

Change behavior to take the message of only and the (last)
critical MCE it detects.

Reported-by: Derek 
Signed-off-by: Borislav Petkov 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Link: http://lkml.kernel.org/r/1431936437-25286-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li