linux-stable.git/arch, branch v3.2.77

m32r: fix m32104ut_defconfig build fail

2016-02-13T10:34:10+00:00

commit 601f1db653217f205ffa5fb33514b4e1711e56d1 upstream.

The build of m32104ut_defconfig for m32r arch was failing for long long
time with the error:

  ERROR: "memory_start" [fs/udf/udf.ko] undefined!
  ERROR: "memory_end" [fs/udf/udf.ko] undefined!
  ERROR: "memory_end" [drivers/scsi/sg.ko] undefined!
  ERROR: "memory_start" [drivers/scsi/sg.ko] undefined!
  ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined!
  ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined!

As done in other architectures export the symbols to fix the error.

Reported-by: Fengguang Wu 
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

sparc64: fix incorrect sign extension in sys_sparc64_personality

2016-02-13T10:34:09+00:00

commit 525fd5a94e1be0776fa652df5c687697db508c91 upstream.

The value returned by sys_personality has type "long int".
It is saved to a variable of type "int", which is not a problem
yet because the type of task_struct->pesonality is "unsigned int".
The problem is the sign extension from "int" to "long int"
that happens on return from sys_sparc64_personality.

For example, a userspace call personality((unsigned) -EINVAL) will
result to any subsequent personality call, including absolutely
harmless read-only personality(0xffffffff) call, failing with
errno set to EINVAL.

Signed-off-by: Dmitry V. Levin 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

x86/mm: Improve switch_mm() barrier comments

2016-02-13T10:34:09+00:00

commit 4eaffdd5a5fe6ff9f95e1ab4de1ac904d5e0fa8b upstream.

My previous comments were still a bit confusing and there was a
typo. Fix it up.

Reported-by: Peter Zijlstra 
Signed-off-by: Andy Lutomirski 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Rik van Riel 
Cc: Thomas Gleixner 
Fixes: 71b3c126e611 ("x86/mm: Add barriers and document switch_mm()-vs-flush synchronization")
Link: http://lkml.kernel.org/r/0a0b43cdcdd241c5faaaecfbcc91a155ddedc9a1.1452631609.git.luto@kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Ben Hutchings

parisc: Fix __ARCH_SI_PREAMBLE_SIZE

2016-02-13T10:34:09+00:00

commit e60fc5aa608eb38b47ba4ee058f306f739eb70a0 upstream.

On a 64bit kernel build the compiler aligns the _sifields union in the
struct siginfo_t on a 64bit address. The __ARCH_SI_PREAMBLE_SIZE define
compensates for this alignment and thus fixes the wait testcase of the
strace package.

The symptoms of a wrong __ARCH_SI_PREAMBLE_SIZE value is that
_sigchld.si_stime variable is missed to be copied and thus after a
copy_siginfo() will have uninitialized values.

Signed-off-by: Helge Deller 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]

2016-02-13T10:34:08+00:00

commit 2f0c0b2d96b1205efb14347009748d786c2d9ba5 upstream.

Without the reboot=pci method, the iMac 10,1 simply
hangs after printing "Restarting system" at the point
when it should reboot. This fixes it.

Signed-off-by: Mario Kleiner 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Jones 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1450466646-26663-1-git-send-email-mario.kleiner.de@gmail.com
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

x86/boot: Double BOOT_HEAP_SIZE to 64KB

2016-02-13T10:34:08+00:00

commit 8c31902cffc4d716450be549c66a67a8a3dd479c upstream.

When decompressing kernel image during x86 bootup, malloc memory
for ELF program headers may run out of heap space, which leads
to system halt.  This patch doubles BOOT_HEAP_SIZE to 64KB.

Tested with 32-bit kernel which failed to boot without this patch.

Signed-off-by: H.J. Lu 
Acked-by: H. Peter Anvin 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Ben Hutchings

x86/mm: Add barriers and document switch_mm()-vs-flush synchronization

2016-02-13T10:34:08+00:00

commit 71b3c126e61177eb693423f2e18a1914205b165e upstream.

When switch_mm() activates a new PGD, it also sets a bit that
tells other CPUs that the PGD is in use so that TLB flush IPIs
will be sent.  In order for that to work correctly, the bit
needs to be visible prior to loading the PGD and therefore
starting to fill the local TLB.

Document all the barriers that make this work correctly and add
a couple that were missing.

Signed-off-by: Andy Lutomirski 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Thomas Gleixner 
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.2:
 - There's no flush_tlb_mm_range(), only flush_tlb_mm() which does not use
   INVLPG
 - Adjust context]
Signed-off-by: Ben Hutchings

uml: flush stdout before forking

2016-02-13T10:34:08+00:00

commit 0754fb298f2f2719f0393491d010d46cfb25d043 upstream.

I was seeing some really weird behaviour where piping UML's output
somewhere would cause output to get duplicated:

  $ ./vmlinux | head -n 40
  Checking that ptrace can change system call numbers...Core dump limits :
          soft - 0
          hard - NONE
  OK
  Checking syscall emulation patch for ptrace...Core dump limits :
          soft - 0
          hard - NONE
  OK
  Checking advanced syscall emulation patch for ptrace...Core dump limits :
          soft - 0
          hard - NONE
  OK
  Core dump limits :
          soft - 0
          hard - NONE

This is because these tests do a fork() which duplicates the non-empty
stdout buffer, then glibc flushes the duplicated buffer as each child
exits.

A simple workaround is to flush before forking.

Signed-off-by: Vegard Nossum 
Signed-off-by: Richard Weinberger 
Signed-off-by: Ben Hutchings

x86/xen: don't reset vcpu_info on a cancelled suspend

2016-02-13T10:34:07+00:00

commit 6a1f513776b78c994045287073e55bae44ed9f8c upstream.

On a cancelled suspend the vcpu_info location does not change (it's
still in the per-cpu area registered by xen_vcpu_setup()).  So do not
call xen_hvm_init_shared_info() which would make the kernel think its
back in the shared info.  With the wrong vcpu_info, events cannot be
received and the domain will hang after a cancelled suspend.

Signed-off-by: Charles Ouyang 
Reviewed-by: Boris Ostrovsky 
Signed-off-by: David Vrabel 
Signed-off-by: Ben Hutchings

x86/LDT: Print the real LDT base address

2016-02-13T10:34:06+00:00

commit 0d430e3fb3f7cdc13c0d22078b820f682821b45a upstream.

This was meant to print base address and entry count; make it do so
again.

Fixes: 37868fe113ff "x86/ldt: Make modify_ldt synchronous"
Signed-off-by: Jan Beulich 
Acked-by: Andy Lutomirski 
Link: http://lkml.kernel.org/r/56797D8402000078000C24F0@prv-mh.provo.novell.com
Signed-off-by: Thomas Gleixner 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings