linux-stable.git/arch, branch v3.2.57

s390: fix kernel crash due to linkage stack instructions

2014-04-09T01:20:46+00:00

commit 8d7f6690cedb83456edd41c9bd583783f0703bf0 upstream.

The kernel currently crashes with a low-address-protection exception
if a user space process executes an instruction that tries to use the
linkage stack. Set the base-ASTE origin and the subspace-ASTE origin
of the dispatchable-unit-control-table to point to a dummy ASTE.
Set up control register 15 to point to an empty linkage stack with no
room left.

A user space process with a linkage stack instruction will still crash
but with a different exception which is correctly translated to a
segmentation fault instead of a kernel oops.

Signed-off-by: Martin Schwidefsky 
Signed-off-by: Ben Hutchings

KVM: VMX: fix use after free of vmx->loaded_vmcs

2014-04-09T01:20:46+00:00

commit 26a865f4aa8e66a6d94958de7656f7f1b03c6c56 upstream.

After free_loaded_vmcs executes, the "loaded_vmcs" structure
is kfreed, and now vmx->loaded_vmcs points to a kfreed area.
Subsequent free_loaded_vmcs then attempts to manipulate
vmx->loaded_vmcs.

Switch the order to avoid the problem.

https://bugzilla.redhat.com/show_bug.cgi?id=1047892

Reviewed-by: Jan Kiszka 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Ben Hutchings

KVM: MMU: handle invalid root_hpa at __direct_map

2014-04-09T01:20:46+00:00

commit 989c6b34f6a9480e397b170cc62237e89bf4fdb9 upstream.

It is possible for __direct_map to be called on invalid root_hpa
(-1), two examples:

1) try_async_pf -> can_do_async_pf
    -> vmx_interrupt_allowed -> nested_vmx_vmexit
2) vmx_handle_exit -> vmx_interrupt_allowed -> nested_vmx_vmexit

Then to load_vmcs12_host_state and kvm_mmu_reset_context.

Check for this possibility, let fault exception be regenerated.

BZ: https://bugzilla.redhat.com/show_bug.cgi?id=924916

Signed-off-by: Marcelo Tosatti 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Ben Hutchings

x86/amd/numa: Fix northbridge quirk to assign correct NUMA node

2014-04-01T23:58:59+00:00

commit 847d7970defb45540735b3fb4e88471c27cacd85 upstream.

For systems with multiple servers and routed fabric, all
northbridges get assigned to the first server. Fix this by also
using the node reported from the PCI bus. For single-fabric
systems, the northbriges are on PCI bus 0 by definition, which
are on NUMA node 0 by definition, so this is invarient on most
systems.

Tested on fam10h and fam15h single and multi-fabric systems and
candidate for stable.

Signed-off-by: Daniel J Blueman 
Acked-by: Steffen Persvold 
Acked-by: Borislav Petkov 
Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Ben Hutchings

KVM: SVM: fix cr8 intercept window

2014-04-01T23:58:59+00:00

commit 596f3142d2b7be307a1652d59e7b93adab918437 upstream.

We always disable cr8 intercept in its handler, but only re-enable it
if handling KVM_REQ_EVENT, so there can be a window where we do not
intercept cr8 writes, which allows an interrupt to disrupt a higher
priority task.

Fix this by disabling intercepts in the same function that re-enables
them when needed. This fixes BSOD in Windows 2008.

Signed-off-by: Radim Krčmář 
Reviewed-by: Marcelo Tosatti 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Ben Hutchings

powerpc: Align p_dyn, p_rela and p_st symbols

2014-04-01T23:58:58+00:00

commit a5b2cf5b1af424ee3dd9e3ce6d5cea18cb927e67 upstream.

The 64bit relocation code places a few symbols in the text segment.
These symbols are only 4 byte aligned where they need to be 8 byte
aligned. Add an explicit alignment.

Signed-off-by: Anton Blanchard 
Tested-by: Laurent Dufour 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

powerpc/crashdump : Fix page frame number check in copy_oldmem_page

2014-04-01T23:58:57+00:00

commit f5295bd8ea8a65dc5eac608b151386314cb978f1 upstream.

In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.

This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.

This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.

Signed-off-by: Laurent Dufour 
Tested-by: Mahesh Salgaonkar 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings

perf/x86: Fix event scheduling

2014-04-01T23:58:56+00:00

commit 26e61e8939b1fe8729572dabe9a9e97d930dd4f6 upstream.

Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures,
with perf WARN_ON()s triggering. He also provided traces of the failures.

This is I think the relevant bit:

	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_disable: x86_pmu_disable
	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926156: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926158: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926159: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1
	>    pec_1076_warn-2804  [000] d...   147.926161: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926162: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926163: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926166: collect_events: Adding event: 1 (ffff880119ec8800)

So we add the insn:p event (fd[23]).

At this point we should have:

  n_events = 2, n_added = 1, n_txn = 1

	>    pec_1076_warn-2804  [000] d...   147.926170: collect_events: Adding event: 0 (ffff8800c9e01800)
	>    pec_1076_warn-2804  [000] d...   147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00)

We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]).
These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so
that's not visible.

	group_sched_in()
	  pmu->start_txn() /* nop - BP pmu */
	  event_sched_in()
	     event->pmu->add()

So here we should end up with:

  0: n_events = 3, n_added = 2, n_txn = 2
  4: n_events = 4, n_added = 3, n_txn = 3

But seeing the below state on x86_pmu_enable(), the must have failed,
because the 0 and 4 events aren't there anymore.

Looking at group_sched_in(), since the BP is the leader, its
event_sched_in() must have succeeded, for otherwise we would not have
seen the sibling adds.

But since neither 0 or 4 are in the below state; their event_sched_in()
must have failed; but I don't see why, the complete state: 0,0,1:p,4
fits perfectly fine on a core2.

However, since we try and schedule 4 it means the 0 event must have
succeeded!  Therefore the 4 event must have failed, its failure will
have put group_sched_in() into the fail path, which will call:

	event_sched_out()
	  event->pmu->del()

on 0 and the BP event.

Now x86_pmu_del() will reduce n_events; but it will not reduce n_added;
giving what we see below:

 n_event = 2, n_added = 2, n_txn = 2

	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_enable: x86_pmu_enable
	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926179: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926181: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926182: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926186: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state:   1->0 tag: 1 config: 1 (ffff880119ec8800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0

So the problem is that x86_pmu_del(), when called from a
group_sched_in() that fails (for whatever reason), and without x86_pmu
TXN support (because the leader is !x86_pmu), will corrupt the n_added
state.

Reported-and-Tested-by: Vince Weaver 
Signed-off-by: Peter Zijlstra 
Cc: Paul Mackerras 
Cc: Steven Rostedt 
Cc: Stephane Eranian 
Cc: Dave Jones 
Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar 
Signed-off-by: Ben Hutchings

ARM: 7957/1: add DSB after icache flush in __flush_icache_all()

2014-04-01T23:58:53+00:00

commit 39544ac9df20f73e49fc6b9ac19ff533388c82c0 upstream.

Add DSB after icache flush to complete the cache maintenance operation.

Signed-off-by: Vinayak Kale 
Acked-by: Catalin Marinas 
Signed-off-by: Russell King 
Signed-off-by: Ben Hutchings

avr32: Makefile: add '-Dlinux' flag for gcc-4.4.7 use

2014-04-01T23:58:53+00:00

commit 8d80390cfc9434d5aa4fb9e5f9768a66b30cb8a6 upstream.

For avr32 cross compiler, do not define '__linux__' internally, so it
will cause issue with allmodconfig.

The related error:

    CC [M]  fs/coda/psdev.o
  In file included from include/linux/coda.h:64,
                   from fs/coda/psdev.c:45:
  include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t'

The related toolchain version (which only download, not re-compile):

  [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v
  Using built-in specs.
  Target: avr32
  Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www
.atmel.com/avr
  Thread model: single
  gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435)

Signed-off-by: Chen Gang 
Acked-by: Hans-Christian Egtvedt 
Signed-off-by: Ben Hutchings

linux-stable.git/arch, branch v3.2.57

s390: fix kernel crash due to linkage stack instructions

KVM: VMX: fix use after free of vmx->loaded_vmcs

KVM: MMU: handle invalid root_hpa at __direct_map

x86/amd/numa: Fix northbridge quirk to assign correct NUMA node

KVM: SVM: fix cr8 intercept window

powerpc: Align p_dyn, p_rela and p_st symbols

powerpc/crashdump : Fix page frame number check in copy_oldmem_page

perf/x86: Fix event scheduling

ARM: 7957/1: add DSB after icache flush in __flush_icache_all()

avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 use

avr32: Makefile: add '-Dlinux' flag for gcc-4.4.7 use