linux-stable.git/arch, branch v3.18.49

powerpc: Emulation support for load/store instructions on LE

2017-04-18T05:55:54+00:00

commit e148bd17f48bd17fca2f4f089ec879fa6e47e34c upstream.

emulate_step() uses a number of underlying kernel functions that were
initially not enabled for LE. This has been rectified since. So, fix
emulate_step() for LE for the corresponding instructions.

Reported-by: Anton Blanchard 
Signed-off-by: Ravi Bangoria 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

MIPS: DEC: Avoid la pseudo-instruction in delay slots

2017-04-18T05:55:54+00:00

commit 3021773c7c3e75e20b693931a19362681e744ea9 upstream.

When expanding the la or dla pseudo-instruction in a delay slot the GNU
assembler will complain should the pseudo-instruction expand to multiple
actual instructions, since only the first of them will be in the delay
slot leading to the pseudo-instruction being only partially executed if
the branch is taken. Use of PTR_LA in the dec int-handler.S leads to
such warnings:

  arch/mips/dec/int-handler.S: Assembler messages:
  arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot
  arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot

Avoid this by open coding the PTR_LA macros.

Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: ip22: Fix ip28 build for modern gcc

2017-04-18T05:55:54+00:00

commit 23ca9b522383d3b9b7991d8586db30118992af4a upstream.

kernelci reports a failure of the ip28_defconfig build after upgrading its
gcc version:

arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store.  Stop.

The problem apparently is that the -mr10k-cache-barrier=store option is now
rejected for CPUs other than r10k. Explicitly including the CPU in the
check fixes this and is safe because both options were introduced in
gcc-4.4.

Signed-off-by: Arnd Bergmann 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15049/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: ip27: Disable qlge driver in defconfig

2017-04-18T05:55:54+00:00

commit b617649468390713db1515ea79fc772d2eb897a8 upstream.

One of the last remaining failures in kernelci.org is for a gcc bug:

drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190

This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot
reproduce the problem here. However, it is clear that ip27_defconfig
does not actually need this driver as the platform has only PCI-X but
not PCIe, and the qlge adapter in turn is PCIe-only.

The driver was originally enabled in 2010 along with lots of other
drivers.

Fixes: 59d302b342e5 ("MIPS: IP27: Make defconfig useful again.")
Signed-off-by: Arnd Bergmann 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15197/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

KVM: s390: Fix guest migration for huge guests resulting in panic

2017-04-18T05:55:53+00:00

commit 2e4d88009f57057df7672fa69a32b5224af54d37 upstream.

While we can technically not run huge page guests right now, we can
setup a guest with huge pages. Trying to migrate it will trigger a
VM_BUG_ON and, if the kernel is not configured to panic on a BUG, it
will happily try to work on non-existing page table entries.

With this patch, we always return "dirty" if we encounter a large page
when migrating. This at least fixes the immediate problem until we
have proper handling for both kind of pages.

Fixes: 15f36eb ("KVM: s390: Add proper dirty bitmap support to S390 kvm.")
Signed-off-by: Janosch Frank 
Acked-by: Christian Borntraeger 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

s390: use correct input data address for setup_randomness

2017-04-18T05:55:53+00:00

commit 4920e3cf77347d7d7373552d4839e8d832321313 upstream.

The current implementation of setup_randomness uses the stack address
and therefore the pointer to the SYSIB 3.2.2 block as input data
address. Furthermore the length of the input data is the number of
virtual-machine description blocks which is typically one.

This means that typically a single zero byte is fed to
add_device_randomness.

Fix both of these and use the address of the first virtual machine
description block as input data address and also use the correct
length.

Fixes: bcfcbb6bae64 ("s390: add system information as device randomness")
Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390: make setup_randomness work

2017-04-18T05:55:53+00:00

commit da8fd820f389a0e29080b14c61bf5cf1d8ef5ca1 upstream.

Commit bcfcbb6bae64 ("s390: add system information as device
randomness") intended to add some virtual machine specific information
to the randomness pool.

Unfortunately it uses the page allocator before it is ready to use. In
result the page allocator always returns NULL and the setup_randomness
function never adds anything to the randomness pool.

To fix this use memblock_alloc and memblock_free instead.

Fixes: bcfcbb6bae64 ("s390: add system information as device randomness")
Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390: TASK_SIZE for kernel threads

2017-04-18T05:55:53+00:00

commit fb94a687d96c570d46332a4a890f1dcb7310e643 upstream.

Return a sensible value if TASK_SIZE if called from a kernel thread.

This gets us around an issue with copy_mount_options that does a magic
size calculation "TASK_SIZE - (unsigned long)data" while in a kernel
thread and data pointing to kernel space.

Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

crypto: ghash-clmulni - Fix load failure

2017-04-18T05:55:53+00:00

commit 3a020a723c65eb8ffa7c237faca26521a024e582 upstream.

ghash_clmulni_intel fails to load on Linux 4.3+ with the following message:
"modprobe: ERROR: could not insert 'ghash_clmulni_intel': Invalid argument"

After 8996eafdc ("crypto: ahash - ensure statesize is non-zero") all ahash
drivers are required to implement import()/export(), and must have a non-
zero statesize.

This patch has been tested with the algif_hash interface. The calculated
digest values, after several rounds of import()s and export()s, match those
calculated by tcrypt.

Signed-off-by: Rui Wang 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD

2017-04-18T05:55:49+00:00

commit 4ab18701c66552944188dbcd0ce0012729baab84 upstream.

FDT tag parsing is not related to whether BLK_DEV_INITRD is configured
or not, move it out of the corresponding #ifdef/#endif block.
This fixes passing external FDT to the kernel configured w/o
BLK_DEV_INITRD support.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman