linux-stable.git/arch, branch v3.14.2 Linux kernel stable tree x86: Adjust irq remapping quirk for older revisions of 5500/5520 chipsets 2014-04-27T00:19:02+00:00 Neil Horman nhorman@tuxdriver.com 2014-03-12T18:44:33+00:00 91800e9977fdf5cd3de2705b1ad1d803ccda48a8 commit 6f8a1b335fde143b7407036e2368d3cd6eb55674 upstream. Commit 03bbcb2e7e2 (iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets) properly disables irq remapping on the 5500/5520 chipsets that don't correctly perform that feature. However, when I wrote it, I followed the errata sheet linked in that commit too closely, and explicitly tied the activation of the quirk to revision 0x13 of the chip, under the assumption that earlier revisions were not in the field. Recently a system was reported to be suffering from this remap bug and the quirk hadn't triggered, because the revision id register read at a lower value that 0x13, so the quirk test failed improperly. Given this, it seems only prudent to adjust this quirk so that any revision less than 0x13 has the quirk asserted. [ tglx: Removed the 0x12 comparison of pci id 3405 as this is covered by the <= 0x13 check already ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1394649873-14913-1-git-send-email-nhorman@tuxdriver.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6f8a1b335fde143b7407036e2368d3cd6eb55674 upstream.

Commit 03bbcb2e7e2 (iommu/vt-d: add quirk for broken interrupt
remapping on 55XX chipsets) properly disables irq remapping on the
5500/5520 chipsets that don't correctly perform that feature.

However, when I wrote it, I followed the errata sheet linked in that
commit too closely, and explicitly tied the activation of the quirk to
revision 0x13 of the chip, under the assumption that earlier revisions
were not in the field.  Recently a system was reported to be suffering
from this remap bug and the quirk hadn't triggered, because the
revision id register read at a lower value that 0x13, so the quirk
test failed improperly.  Given this, it seems only prudent to adjust
this quirk so that any revision less than 0x13 has the quirk asserted.

[ tglx: Removed the 0x12 comparison of pci id 3405 as this is covered
    	by the <= 0x13 check already ]

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1394649873-14913-1-git-send-email-nhorman@tuxdriver.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86, hyperv: Bypass the timer_irq_works() check 2014-04-27T00:19:02+00:00 Jason Wang jasowang@redhat.com 2014-02-28T03:30:29+00:00 f2355ea2f4437d66b7807dbc75eb5f7874fffdfa commit ca3ba2a2f4a49a308e7d78c784d51b2332064f15 upstream. This patch bypass the timer_irq_works() check for hyperv guest since: - It was guaranteed to work. - timer_irq_works() may fail sometime due to the lpj calibration were inaccurate in a hyperv guest or a buggy host. In the future, we should get the tsc frequency from hypervisor and use preset lpj instead. [ hpa: I would prefer to not defer things to "the future" in the future... ] Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/1393558229-14755-1-git-send-email-jasowang@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ca3ba2a2f4a49a308e7d78c784d51b2332064f15 upstream.

This patch bypass the timer_irq_works() check for hyperv guest since:

- It was guaranteed to work.
- timer_irq_works() may fail sometime due to the lpj calibration were inaccurate
  in a hyperv guest or a buggy host.

In the future, we should get the tsc frequency from hypervisor and use preset
lpj instead.

[ hpa: I would prefer to not defer things to "the future" in the future... ]

Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/1393558229-14755-1-git-send-email-jasowang@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crypto: ghash-clmulni-intel - use C implementation for setkey() 2014-04-14T13:50:05+00:00 Ard Biesheuvel ard.biesheuvel@linaro.org 2014-03-27T17:14:40+00:00 cf0983a4a1db58bb7049af652d3979bf6261f939 commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream. The GHASH setkey() function uses SSE registers but fails to call kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and then having to deal with the restriction that they cannot be called from interrupt context, move the setkey() implementation to the C domain. Note that setkey() does not use any particular SSE features and is not expected to become a performance bottleneck. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream.

The GHASH setkey() function uses SSE registers but fails to call
kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and
then having to deal with the restriction that they cannot be called from
interrupt context, move the setkey() implementation to the C domain.

Note that setkey() does not use any particular SSE features and is not
expected to become a performance bottleneck.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
m68k: Skip futex_atomic_cmpxchg_inatomic() test 2014-04-14T13:50:05+00:00 Finn Thain fthain@telegraphics.com.au 2014-03-05T23:29:27+00:00 30062756651927f05191b906236ad030a030dc61 commit e571c58f313d35c56e0018470e3375ddd1fd320e upstream. Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a fatal exception on 68030 (and presumably 68020 also). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1403061006440.5525@nippy.intranet Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e571c58f313d35c56e0018470e3375ddd1fd320e upstream.

Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a
fatal exception on 68030 (and presumably 68020 also).

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1403061006440.5525@nippy.intranet
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test 2014-04-14T13:50:05+00:00 Heiko Carstens heiko.carstens@de.ibm.com 2014-03-02T12:09:47+00:00 d232ed0c0eee44a5d3bbc4f21f136a303e77c34d commit 03b8c7b623c80af264c4c8d6111e5c6289933666 upstream. If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there is no runtime check necessary, allow to skip the test within futex_init(). This allows to get rid of some code which would always give the same result, and also allows the compiler to optimize a couple of if statements away. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20140302120947.GA3641@osiris Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 03b8c7b623c80af264c4c8d6111e5c6289933666 upstream.

If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there
is no runtime check necessary, allow to skip the test within futex_init().

This allows to get rid of some code which would always give the same result,
and also allows the compiler to optimize a couple of if statements away.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20140302120947.GA3641@osiris
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARC: [nsimosci] Unbork console 2014-04-14T13:50:05+00:00 Vineet Gupta vgupta@synopsys.com 2014-04-05T10:00:22+00:00 d99a848a2aefccfc7bdc13f09a622006adb69f4b commit 61fb4bfc010b0d2940f7fd87acbce6a0f03217cb upstream. Despite the switch to right UART driver (prev patch), serial console still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM Also fix the default cmdline in DT to not refer to out-of-tree ARC framebuffer driver for console. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <Francois.Bedard@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 61fb4bfc010b0d2940f7fd87acbce6a0f03217cb upstream.

Despite the switch to right UART driver (prev patch), serial console
still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM

Also fix the default cmdline in DT to not refer to out-of-tree
ARC framebuffer driver for console.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARC: [nsimosci] Change .dts to use generic 8250 UART 2014-04-14T13:50:05+00:00 Mischa Jonker mjonker@synopsys.com 2013-05-16T17:36:08+00:00 b46cb9ce8d797382d03943d73b7964df60a7088b commit 6eda477b3c54b8236868c8784e5e042ff14244f0 upstream. The Synopsys APB DW UART has a couple of special features that are not in the System C model. In 3.8, the 8250_dw driver didn't really use these features, but from 3.9 onwards, the 8250_dw driver has become incompatible with our model. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <Francois.Bedard@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6eda477b3c54b8236868c8784e5e042ff14244f0 upstream.

The Synopsys APB DW UART has a couple of special features that are not
in the System C model. In 3.8, the 8250_dw driver didn't really use these
features, but from 3.9 onwards, the 8250_dw driver has become incompatible
with our model.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/efi: Make efi virtual runtime map passing more robust 2014-04-14T13:50:02+00:00 Borislav Petkov bp@suse.de 2014-01-18T11:48:17+00:00 579d8f085b5745ea443a7e79b8283178f28981e0 commit b7b898ae0c0a82489511a1ce1b35f26215e6beb5 upstream. Currently, running SetVirtualAddressMap() and passing the physical address of the virtual map array was working only by a lucky coincidence because the memory was present in the EFI page table too. Until Toshi went and booted this on a big HP box - the krealloc() manner of resizing the memmap we're doing did allocate from such physical addresses which were not mapped anymore and boom: http://lkml.kernel.org/r/1386806463.1791.295.camel@misato.fc.hp.com One way to take care of that issue is to reimplement the krealloc thing but with pages. We start with contiguous pages of order 1, i.e. 2 pages, and when we deplete that memory (shouldn't happen all that often but you know firmware) we realloc the next power-of-two pages. Having the pages, it is much more handy and easy to map them into the EFI page table with the already existing mapping code which we're using for building the virtual mappings. Thanks to Toshi Kani and Matt for the great debugging help. Reported-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b7b898ae0c0a82489511a1ce1b35f26215e6beb5 upstream.

Currently, running SetVirtualAddressMap() and passing the physical
address of the virtual map array was working only by a lucky coincidence
because the memory was present in the EFI page table too. Until Toshi
went and booted this on a big HP box - the krealloc() manner of resizing
the memmap we're doing did allocate from such physical addresses which
were not mapped anymore and boom:

http://lkml.kernel.org/r/1386806463.1791.295.camel@misato.fc.hp.com

One way to take care of that issue is to reimplement the krealloc thing
but with pages. We start with contiguous pages of order 1, i.e. 2 pages,
and when we deplete that memory (shouldn't happen all that often but you
know firmware) we realloc the next power-of-two pages.

Having the pages, it is much more handy and easy to map them into the
EFI page table with the already existing mapping code which we're using
for building the virtual mappings.

Thanks to Toshi Kani and Matt for the great debugging help.

Reported-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86, pageattr: Export page unmapping interface 2014-04-14T13:50:02+00:00 Borislav Petkov bp@suse.de 2014-01-18T11:48:16+00:00 6f48949f01c41782a3215a8fbff0997c5199d2c1 commit 42a5477251f0e0f33ad5f6a95c48d685ec03191e upstream. We will use it in efi so expose it. Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 42a5477251f0e0f33ad5f6a95c48d685ec03191e upstream.

We will use it in efi so expose it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86: fix boot on uniprocessor systems 2014-03-28T20:56:58+00:00 Artem Fetishev artem_fetishev@epam.com 2014-03-28T20:33:39+00:00 825600c0f20e595daaa7a6dd8970f84fa2a2ee57 On x86 uniprocessor systems topology_physical_package_id() returns -1 which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized which leads to GPF in rapl_pmu_init(). See arch/x86/kernel/cpu/perf_event_intel_rapl.c. It turns out that physical_package_id and core_id can actually be retreived for uniprocessor systems too. Enabling them also fixes rapl_pmu code. Signed-off-by: Artem Fetishev <artem_fetishev@epam.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
On x86 uniprocessor systems topology_physical_package_id() returns -1
which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized
which leads to GPF in rapl_pmu_init().

See arch/x86/kernel/cpu/perf_event_intel_rapl.c.

It turns out that physical_package_id and core_id can actually be
retreived for uniprocessor systems too.  Enabling them also fixes
rapl_pmu code.

Signed-off-by: Artem Fetishev <artem_fetishev@epam.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>