linux-stable.git/arch, branch v3.10.83

bus: mvebu: pass the coherency availability information at init time

2015-07-04T02:48:09+00:00

commit 5686a1e5aa436c49187a60052d5885fb1f541ce6 upstream.

Until now, the mvebu-mbus was guessing by itself whether hardware I/O
coherency was available or not by poking into the Device Tree to see
if the coherency fabric Device Tree node was present or not.

However, on some upcoming SoCs, the presence or absence of the
coherency fabric DT node isn't sufficient: in CONFIG_SMP, the
coherency can be enabled, but not in !CONFIG_SMP.

In order to clean this up, the mvebu_mbus_dt_init() function is
extended to get a boolean argument telling whether coherency is
enabled or not. Therefore, the logic to decide whether coherency is
available or not now belongs to the core SoC code instead of the
mvebu-mbus driver itself, which is much better.

Signed-off-by: Thomas Petazzoni
Link: https://lkml.kernel.org/r/1397483228-25625-4-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper

[ Greg Ungerer: back ported to linux-3.10.y
Back port necessary due to large code differences in affected files.
This change in combination with commit e553554536 ("ARM: mvebu: disable
I/O coherency on non-SMP situations on Armada 370/375/38x/XP") is
critical to the hardware I/O coherency being set correctly by both the
mbus driver and all peripheral hardware drivers. Without this change
drivers will incorrectly enable I/O coherency window attributes and
this causes rare unreliable system behavior including oops. ]

Signed-off-by: Greg Ungerer
Acked-by: Gregory CLEMENT
Signed-off-by: Greg Kroah-Hartman

KVM: nSVM: Check for NRIPS support before updating control field

2015-07-04T02:48:09+00:00

commit f104765b4f81fd74d69e0eb161e89096deade2db upstream.

If hardware doesn't support DecodeAssist - a feature that provides
more information about the intercept in the VMCB, KVM decodes the
instruction and then updates the next_rip vmcb control field.
However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS].
Since skip_emulated_instruction() doesn't verify nrip support
before accepting control.next_rip as valid, avoid writing this
field if support isn't present.

Signed-off-by: Bandan Das 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

ARM: clk-imx6q: refine sata's parent

2015-07-04T02:48:09+00:00

commit da946aeaeadcd24ff0cda9984c6fb8ed2bfd462a upstream.

According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg.

Signed-off-by: Sebastien Szymanski 
Reviewed-by: Fabio Estevam 
Signed-off-by: Shawn Guo 
[dirk.behme: Adjust moved file]
Signed-off-by: Dirk Behme 
Signed-off-by: Greg Kroah-Hartman

x86/microcode/intel: Guard against stack overflow in the loader

2015-07-04T02:48:09+00:00

commit f84598bd7c851f8b0bf8cd0d7c3be0d73c432ff4 upstream.

mc_saved_tmp is a static array allocated on the stack, we need to make
sure mc_saved_count stays within its bounds, otherwise we're overflowing
the stack in _save_mc(). A specially crafted microcode header could lead
to a kernel crash or potentially kernel execution.

Signed-off-by: Quentin Casasnovas 
Cc: "H. Peter Anvin" 
Cc: Fenghua Yu 
Link: http://lkml.kernel.org/r/1422964824-22056-1-git-send-email-quentin.casasnovas@oracle.com
Signed-off-by: Borislav Petkov 
Signed-off-by: Jiri Slaby 
Signed-off-by: Sheng Yong 
Signed-off-by: Greg Kroah-Hartman

config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected

2015-07-04T02:48:08+00:00

commit a6dfa128ce5c414ab46b1d690f7a1b8decb8526d upstream.

A huge amount of NIC drivers use the DMA API, however if
compiled under 32-bit an very important part of the DMA API can
be ommitted leading to the drivers not working at all
(especially if used with 'swiotlb=force iommu=soft').

As Prashant Sreedharan explains it: "the driver [tg3] uses
DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of
the dma "mapping" and dma_unmap_addr() to get the "mapping"
value. On most of the platforms this is a no-op, but ... with
"iommu=soft and swiotlb=force" this house keeping is required,
... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_
instead of the DMA address."

As such enable this even when using 32-bit kernels.

Reported-by: Ian Jackson 
Signed-off-by: Konrad Rzeszutek Wilk 
Acked-by: David S. Miller 
Acked-by: Prashant Sreedharan 
Cc: Borislav Petkov 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Michael Chan 
Cc: Thomas Gleixner 
Cc: boris.ostrovsky@oracle.com
Cc: cascardo@linux.vnet.ibm.com
Cc: david.vrabel@citrix.com
Cc: sanjeevb@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: vyasevich@gmail.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.com
Signed-off-by: Ingo Molnar 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix enabling of DEBUG_STACKOVERFLOW

2015-06-22T23:55:53+00:00

commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.

Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.

Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Adam Jiang 
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

ARM: fix missing syscall trace exit

2015-06-06T06:19:59+00:00

commit 1b97937246d8b97c0760d16d8992c7937bdf5e6a upstream.

Josh Stone reports:

  I've discovered a case where both arm and arm64 will miss a ptrace
  syscall-exit that they should report.  If the syscall is entered
  without TIF_SYSCALL_TRACE set, then it goes on the fast path.  It's
  then possible to have TIF_SYSCALL_TRACE added in the middle of the
  syscall, but ret_fast_syscall doesn't check this flag again.

Fix this by always checking for a syscall trace in the fast exit path.

Reported-by: Josh Stone 
Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx27: only map 4 Kbyte for fec registers

2015-06-06T06:19:59+00:00

commit a29ef819f3f34f89a1b9b6a939b4c1cdfe1e85ce upstream.

According to the imx27 documentation, fec has a 4 Kbyte
memory space map. Moreover, the actual 16 Kbyte mapping
overlaps the SCC (Security Controller) memory register
space. So, we reduce the memory register space to 4 Kbyte.

Signed-off-by: Philippe Reynes 
Acked-by: Uwe Kleine-König 
Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support")
Signed-off-by: Shawn Guo 
Signed-off-by: Greg Kroah-Hartman

crypto: s390/ghash - Fix incorrect ghash icv buffer handling.

2015-06-06T06:19:58+00:00

commit a1cae34e23b1293eccbcc8ee9b39298039c3952a upstream.

Multitheaded tests showed that the icv buffer in the current ghash
implementation is not handled correctly. A move of this working ghash
buffer value to the descriptor context fixed this. Code is tested and
verified with an multithreaded application via af_alg interface.

Signed-off-by: Harald Freudenberger 
Signed-off-by: Gerald Schaefer 
Reported-by: Herbert Xu 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

powerpc: Align TOC to 256 bytes

2015-06-06T06:19:57+00:00

commit 5e95235ccd5442d4a4fe11ec4eb99ba1b7959368 upstream.

Recent toolchains force the TOC to be 256 byte aligned. We need
to enforce this alignment in our linker script, otherwise pointers
to our TOC variables (__toc_start, __prom_init_toc_start) could
be incorrect.

If they are bad, we die a few hundred instructions into boot.

Signed-off-by: Anton Blanchard 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman