linux-stable.git/arch, branch v3.0.40

m68k: Correct the Atari ALLOWINT definition

2012-08-09T15:27:53+00:00

commit c663600584a596b5e66258cc10716fb781a5c2c9 upstream.

Booting a 3.2, 3.3, or 3.4-rc4 kernel on an Atari using the
`nfeth' ethernet device triggers a WARN_ONCE() in generic irq
handling code on the first irq for that device:

WARNING: at kernel/irq/handle.c:146 handle_irq_event_percpu+0x134/0x142()
irq 3 handler nfeth_interrupt+0x0/0x194 enabled interrupts
Modules linked in:
Call Trace: [<000299b2>] warn_slowpath_common+0x48/0x6a
 [<000299c0>] warn_slowpath_common+0x56/0x6a
 [<00029a4c>] warn_slowpath_fmt+0x2a/0x32
 [<0005b34c>] handle_irq_event_percpu+0x134/0x142
 [<0005b34c>] handle_irq_event_percpu+0x134/0x142
 [<0000a584>] nfeth_interrupt+0x0/0x194
 [<001ba0a8>] schedule_preempt_disabled+0x0/0xc
 [<0005b37a>] handle_irq_event+0x20/0x2c
 [<0005add4>] generic_handle_irq+0x2c/0x3a
 [<00002ab6>] do_IRQ+0x20/0x32
 [<0000289e>] auto_irqhandler_fixup+0x4/0x6
 [<00003144>] cpu_idle+0x22/0x2e
 [<001b8a78>] printk+0x0/0x18
 [<0024d112>] start_kernel+0x37a/0x386
 [<0003021d>] __do_proc_dointvec+0xb1/0x366
 [<0003021d>] __do_proc_dointvec+0xb1/0x366
 [<0024c31e>] _sinittext+0x31e/0x9c0

After invoking the irq's handler the kernel sees !irqs_disabled()
and concludes that the handler erroneously enabled interrupts.

However, debugging shows that !irqs_disabled() is true even before
the handler is invoked, which indicates a problem in the platform
code rather than the specific driver.

The warning does not occur in 3.1 or older kernels.

It turns out that the ALLOWINT definition for Atari is incorrect.

The Atari definition of ALLOWINT is ~0x400, the stated purpose of
that is to avoid taking HSYNC interrupts.  irqs_disabled() returns
true if the 3-bit ipl & 4 is non-zero.  The nfeth interrupt runs at
ipl 3 (it's autovector 3), but 3 & 4 is zero so irqs_disabled() is
false, and the warning above is generated.

When interrupts are explicitly disabled, ipl is set to 7.  When they
are enabled, ipl is masked with ALLOWINT.  On Atari this will result
in ipl = 3, which blocks interrupts at ipl 3 and below.  So how come
nfeth interrupts at ipl 3 are received at all?  That's because ipl
is reset to 2 by Atari-specific code in default_idle(), again with
the stated purpose of blocking HSYNC interrupts.  This discrepancy
means that ipl 3 can remain blocked for longer than intended.

Both default_idle() and falcon_hblhandler() identify HSYNC with
ipl 2, and the "Atari ST/.../F030 Hardware Register Listing" agrees,
but ALLOWINT is defined as if HSYNC was ipl 3.

[As an experiment I modified default_idle() to reset ipl to 3, and
as expected that resulted in all nfeth interrupts being blocked.]

The fix is simple: define ALLOWINT as ~0x500 instead.  This makes
arch_local_irq_enable() consistent with default_idle(), and prevents
the !irqs_disabled() problems for ipl 3 interrupts.

Tested on Atari running in an Aranym VM.

Signed-off-by: Mikael Pettersson 
Tested-by: Michael Schmitz 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman

m68k: Make sys_atomic_cmpxchg_32 work on classic m68k

2012-08-09T15:27:53+00:00

commit 9e2760d18b3cf179534bbc27692c84879c61b97c upstream.

User space access must always go through uaccess accessors, since on
classic m68k user space and kernel space are completely separate.

Signed-off-by: Andreas Schwab 
Tested-by: Thorsten Glaser 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman

ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad one

2012-08-09T15:27:35+00:00

commit b110547e586eb5825bc1d04aa9147bff83b57672 upstream.

Commit 9fa2df6b90786301b175e264f5fa9846aba81a65
(ARM: OMAP2+: OPP: allow OPP enumeration to continue if device is not present)
makes the logic:
for (i = 0; i < opp_def_size; i++) {
	
	if (!oh || !oh->od) {
		
		continue;
	}

opp_def++;
}

In short, the moment we hit a "Bad OPP", we end up looping the list
comparing against the bad opp definition pointer for the rest of the
iteration count. Instead, increment opp_def in the for loop itself
and allow continue to be used in code without much thought so that
we check the next set of OPP definition pointers :)

Cc: Steve Sakoman 
Cc: Tony Lindgren 
Signed-off-by: Nishanth Menon 
Signed-off-by: Kevin Hilman 
Signed-off-by: Greg Kroah-Hartman

powerpc: Fix wrong divisor in usecs_to_cputime

2012-08-09T15:27:34+00:00

commit 9f5072d4f63f28d30d343573830ac6c85fc0deff upstream.

Commit d57af9b (taskstats: use real microsecond granularity for CPU times)
renamed msecs_to_cputime to usecs_to_cputime, but failed to update all
numbers on the way.  This causes nonsensical cpu idle/iowait values to be
displayed in /proc/stat (the only user of usecs_to_cputime so far).

This also renames __cputime_msec_factor to __cputime_usec_factor, adapting
its value and using it directly in cputime_to_usecs instead of doing two
multiplications.

Signed-off-by: Andreas Schwab 
Acked-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
Cc: Michal Hocko 
Signed-off-by: Greg Kroah-Hartman

powerpc: Add "memory" attribute for mfmsr()

2012-08-09T15:27:33+00:00

commit b416c9a10baae6a177b4f9ee858b8d309542fbef upstream.

Add "memory" attribute in inline assembly language as a compiler
barrier to make sure 4.6.x GCC don't reorder mfmsr().

Signed-off-by: Tiejun Chen 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Greg Kroah-Hartman

powerpc/ftrace: Fix assembly trampoline register usage

2012-08-09T15:27:33+00:00

commit fd5a42980e1cf327b7240adf5e7b51ea41c23437 upstream.

Just like the module loader, ftrace needs to be updated to use r12
instead of r11 with newer gcc's.

Signed-off-by: Roger Blofeld 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Gortmaker 
Signed-off-by: Greg Kroah-Hartman

MIPS: Properly align the .data..init_task section.

2012-08-01T19:26:54+00:00

commit 7b1c0d26a8e272787f0f9fcc5f3e8531df3b3409 upstream.

Improper alignment can lead to unbootable systems and/or random
crashes.

[ralf@linux-mips.org: This is a lond standing bug since
6eb10bc9e2deab06630261cd05c4cb1e9a60e980 (kernel.org) rsp.
c422a10917f75fd19fa7fe070aaaa23e384dae6f (lmo) [MIPS: Clean up linker script
using new linker script macros.] so dates back to 2.6.32.]

Signed-off-by: David Daney 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3881/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

ARM: SAMSUNG: fix race in s3c_adc_start for ADC

2012-07-19T15:58:21+00:00

commit 8265981bb439f3ecc5356fb877a6c2a6636ac88a upstream.

Checking for adc->ts_pend already claimed should be done with the
lock held.

Signed-off-by: Todd Poynor 
Acked-by: Ben Dooks 
Signed-off-by: Kukjin Kim 
Signed-off-by: Greg Kroah-Hartman

ACPI: Remove one board specific WARN when ignoring timer overriding

2012-07-16T15:47:52+00:00

commit 7f68b4c2e158019c2ec494b5cfbd9c83b4e5b253 upstream.

Current WARN msg is only for the ati_ixp4x0 board, while this function
is used by mulitple platforms. So this one board specific warning
is not appropriate any more.

Signed-off-by: Feng Tang 
Signed-off-by: Len Brown 
Signed-off-by: Greg Kroah-Hartman

ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases

2012-07-16T15:47:52+00:00

commit ae10ccdc3093486f8c2369d227583f9d79f628e5 upstream.

Currently when acpi_skip_timer_override is set, it only cover the
(source_irq == 0 && global_irq == 2) cases. While there is also
platform which need use this option and its global_irq is not 2.
This patch will extend acpi_skip_timer_override to cover all
timer overriding cases as long as the source irq is 0.

This is the first part of a fix to kernel bug bugzilla 40002:
	"IRQ 0 assigned to VGA"
https://bugzilla.kernel.org/show_bug.cgi?id=40002

Reported-and-tested-by: Szymon Kowalczyk 
Signed-off-by: Feng Tang 
Signed-off-by: Len Brown 
Signed-off-by: Greg Kroah-Hartman