linux-stable.git/arch, branch linux-3.15.y Linux kernel stable tree arch/sparc/math-emu/math_32.c: drop stray break operator 2014-08-14T01:51:50+00:00 Andrey Utkin andrey.krieger.utkin@gmail.com 2014-08-04T20:47:41+00:00 6842db49948be0f1667a283bb3f763f6473ed189 [ Upstream commit 093758e3daede29cb4ce6aedb111becf9d4bfc57 ] This commit is a guesswork, but it seems to make sense to drop this break, as otherwise the following line is never executed and becomes dead code. And that following line actually saves the result of local calculation by the pointer given in function argument. So the proposed change makes sense if this code in the whole makes sense (but I am unable to analyze it in the whole). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 093758e3daede29cb4ce6aedb111becf9d4bfc57 ]

This commit is a guesswork, but it seems to make sense to drop this
break, as otherwise the following line is never executed and becomes
dead code. And that following line actually saves the result of
local calculation by the pointer given in function argument. So the
proposed change makes sense if this code in the whole makes sense (but I
am unable to analyze it in the whole).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparc64: ldc_connect() should not return EINVAL when handshake is in progress. 2014-08-14T01:51:50+00:00 Sowmini Varadhan sowmini.varadhan@oracle.com 2014-08-01T13:50:40+00:00 5be33825199eb5eeded2afdc9231822cb1237fab [ Upstream commit 4ec1b01029b4facb651b8ef70bc20a4be4cebc63 ] The LDC handshake could have been asynchronously triggered after ldc_bind() enables the ldc_rx() receive interrupt-handler (and thus intercepts incoming control packets) and before vio_port_up() calls ldc_connect(). If that is the case, ldc_connect() should return 0 and let the state-machine progress. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 4ec1b01029b4facb651b8ef70bc20a4be4cebc63 ]

The LDC handshake could have been asynchronously triggered
after ldc_bind() enables the ldc_rx() receive interrupt-handler
(and thus intercepts incoming control packets)
and before vio_port_up() calls ldc_connect(). If that is the case,
ldc_connect() should return 0 and let the state-machine
progress.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Karl Volz <karl.volz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparc64: Guard against flushing openfirmware mappings. 2014-08-14T01:51:49+00:00 David S. Miller davem@davemloft.net 2014-08-05T03:07:37+00:00 2e2139cdb0e65390b731914c5a8c6416664dfb71 [ Upstream commit 4ca9a23765da3260058db3431faf5b4efd8cf926 ] Based almost entirely upon a patch by Christopher Alexander Tobias Schulze. In commit db64fe02258f1507e13fe5212a989922323685ce ("mm: rewrite vmap layer") lazy VMAP tlb flushing was added to the vmalloc layer. This causes problems on sparc64. Sparc64 has two VMAP mapped regions and they are not contiguous with eachother. First we have the malloc mapping area, then another unrelated region, then the vmalloc region. This "another unrelated region" is where the firmware is mapped. If the lazy TLB flushing logic in the vmalloc code triggers after we've had both a module unload and a vfree or similar, it will pass an address range that goes from somewhere inside the malloc region to somewhere inside the vmalloc region, and thus covering the openfirmware area entirely. The sparc64 kernel learns about openfirmware's dynamic mappings in this region early in the boot, and then services TLB misses in this area. But openfirmware has some locked TLB entries which are not mentioned in those dynamic mappings and we should thus not disturb them. These huge lazy TLB flush ranges causes those openfirmware locked TLB entries to be removed, resulting in all kinds of problems including hard hangs and crashes during reboot/reset. Besides causing problems like this, such huge TLB flush ranges are also incredibly inefficient. A plea has been made with the author of the VMAP lazy TLB flushing code, but for now we'll put a safety guard into our flush_tlb_kernel_range() implementation. Since the implementation has become non-trivial, stop defining it as a macro and instead make it a function in a C source file. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 4ca9a23765da3260058db3431faf5b4efd8cf926 ]

Based almost entirely upon a patch by Christopher Alexander Tobias
Schulze.

In commit db64fe02258f1507e13fe5212a989922323685ce ("mm: rewrite vmap
layer") lazy VMAP tlb flushing was added to the vmalloc layer.  This
causes problems on sparc64.

Sparc64 has two VMAP mapped regions and they are not contiguous with
eachother.  First we have the malloc mapping area, then another
unrelated region, then the vmalloc region.

This "another unrelated region" is where the firmware is mapped.

If the lazy TLB flushing logic in the vmalloc code triggers after
we've had both a module unload and a vfree or similar, it will pass an
address range that goes from somewhere inside the malloc region to
somewhere inside the vmalloc region, and thus covering the
openfirmware area entirely.

The sparc64 kernel learns about openfirmware's dynamic mappings in
this region early in the boot, and then services TLB misses in this
area.  But openfirmware has some locked TLB entries which are not
mentioned in those dynamic mappings and we should thus not disturb
them.

These huge lazy TLB flush ranges causes those openfirmware locked TLB
entries to be removed, resulting in all kinds of problems including
hard hangs and crashes during reboot/reset.

Besides causing problems like this, such huge TLB flush ranges are
also incredibly inefficient.  A plea has been made with the author of
the VMAP lazy TLB flushing code, but for now we'll put a safety guard
into our flush_tlb_kernel_range() implementation.

Since the implementation has become non-trivial, stop defining it as a
macro and instead make it a function in a C source file.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparc64: Do not insert non-valid PTEs into the TSB hash table. 2014-08-14T01:51:49+00:00 David S. Miller davem@davemloft.net 2014-08-04T23:34:01+00:00 195b1f17492a9cfd74391e11389710ae1d9be371 [ Upstream commit 18f38132528c3e603c66ea464727b29e9bbcb91b ] The assumption was that update_mmu_cache() (and the equivalent for PMDs) would only be called when the PTE being installed will be accessible by the user. This is not true for code paths originating from remove_migration_pte(). There are dire consequences for placing a non-valid PTE into the TSB. The TLB miss frramework assumes thatwhen a TSB entry matches we can just load it into the TLB and return from the TLB miss trap. So if a non-valid PTE is in there, we will deadlock taking the TLB miss over and over, never satisfying the miss. Just exit early from update_mmu_cache() and friends in this situation. Based upon a report and patch from Christopher Alexander Tobias Schulze. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 18f38132528c3e603c66ea464727b29e9bbcb91b ]

The assumption was that update_mmu_cache() (and the equivalent for PMDs) would
only be called when the PTE being installed will be accessible by the user.

This is not true for code paths originating from remove_migration_pte().

There are dire consequences for placing a non-valid PTE into the TSB.  The TLB
miss frramework assumes thatwhen a TSB entry matches we can just load it into
the TLB and return from the TLB miss trap.

So if a non-valid PTE is in there, we will deadlock taking the TLB miss over
and over, never satisfying the miss.

Just exit early from update_mmu_cache() and friends in this situation.

Based upon a report and patch from Christopher Alexander Tobias Schulze.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparc: Hook up renameat2 syscall. 2014-08-14T01:51:49+00:00 David S. Miller davem@davemloft.net 2014-07-22T05:27:56+00:00 ca1d67673a5d57140143c309b4e309ed0fc99487 [ Upstream commit 26053926feb1c16ade9c30bc7443bf28d829d08e ] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 26053926feb1c16ade9c30bc7443bf28d829d08e ]

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/espfix/xen: Fix allocation of pages for paravirt page tables 2014-08-07T23:53:54+00:00 Boris Ostrovsky boris.ostrovsky@oracle.com 2014-07-09T17:18:18+00:00 8f0d9e956f8000880cb0fce47c25e7bc16d79d41 commit 8762e5092828c4dc0f49da5a47a644c670df77f3 upstream. init_espfix_ap() is currently off by one level when informing hypervisor that allocated pages will be used for ministacks' page tables. The most immediate effect of this on a PV guest is that if 'stack_page = __get_free_page()' returns a non-zeroed-out page the hypervisor will refuse to use it for a page table (which it shouldn't be anyway). This will result in warnings by both Xen and Linux. More importantly, a subsequent write to that page (again, by a PV guest) is likely to result in fatal page fault. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1404926298-5565-1-git-send-email-boris.ostrovsky@oracle.com Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8762e5092828c4dc0f49da5a47a644c670df77f3 upstream.

init_espfix_ap() is currently off by one level when informing hypervisor
that allocated pages will be used for ministacks' page tables.

The most immediate effect of this on a PV guest is that if
'stack_page = __get_free_page()' returns a non-zeroed-out page the hypervisor
will refuse to use it for a page table (which it shouldn't be anyway). This will
result in warnings by both Xen and Linux.

More importantly, a subsequent write to that page (again, by a PV guest) is
likely to result in fatal page fault.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1404926298-5565-1-git-send-email-boris.ostrovsky@oracle.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xtensa: add fixup for double exception raised in window overflow 2014-08-07T23:53:53+00:00 Max Filippov jcmvbkbc@gmail.com 2014-05-24T17:48:28+00:00 809c61dac354991792eeb910ea3b3962c28f62af commit 17290231df16eeee5dfc198dbf5ee4b419996dcd upstream. There are two FIXMEs in the double exception handler 'for the extremely unlikely case'. This case gets hit by gcc during kernel build once in a few hours, resulting in an unrecoverable exception condition. Provide missing fixup routine to handle this case. Double exception literals now need 8 more bytes, add them to the linker script. Also replace bbsi instructions with bbsi.l as we're branching depending on 8th and 7th LSB-based bits of exception address. This may be tested by adding the explicit DTLB invalidation to window overflow handlers, like the following: # --- a/arch/xtensa/kernel/vectors.S # +++ b/arch/xtensa/kernel/vectors.S # @@ -592,6 +592,14 @@ ENDPROC(_WindowUnderflow4) # ENTRY_ALIGN64(_WindowOverflow8) # # s32e a0, a9, -16 # + bbsi.l a9, 31, 1f # + rsr a0, ccount # + bbsi.l a0, 4, 1f # + pdtlb a0, a9 # + idtlb a0 # + movi a0, 9 # + idtlb a0 # +1: # l32e a0, a1, -12 # s32e a2, a9, -8 # s32e a1, a9, -12 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 17290231df16eeee5dfc198dbf5ee4b419996dcd upstream.

There are two FIXMEs in the double exception handler 'for the extremely
unlikely case'. This case gets hit by gcc during kernel build once in
a few hours, resulting in an unrecoverable exception condition.

Provide missing fixup routine to handle this case. Double exception
literals now need 8 more bytes, add them to the linker script.

Also replace bbsi instructions with bbsi.l as we're branching depending
on 8th and 7th LSB-based bits of exception address.

This may be tested by adding the explicit DTLB invalidation to window
overflow handlers, like the following:

#    --- a/arch/xtensa/kernel/vectors.S
#    +++ b/arch/xtensa/kernel/vectors.S
#    @@ -592,6 +592,14 @@ ENDPROC(_WindowUnderflow4)
#     ENTRY_ALIGN64(_WindowOverflow8)
#
#    	s32e	a0, a9, -16
#    +	bbsi.l	a9, 31, 1f
#    +	rsr	a0, ccount
#    +	bbsi.l	a0, 4, 1f
#    +	pdtlb	a0, a9
#    +	idtlb	a0
#    +	movi	a0, 9
#    +	idtlb	a0
#    +1:
#    	l32e    a0, a1, -12
#    	s32e    a2, a9,  -8
#    	s32e    a1, a9, -12

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/xen: no need to explicitly register an NMI callback 2014-08-07T23:53:53+00:00 David Vrabel david.vrabel@citrix.com 2014-06-16T11:07:00+00:00 03b3b027c75bbb243de7d720595bc0c6dab05bd7 commit ea9f9274bf4337ba7cbab241c780487651642d63 upstream. Remove xen_enable_nmi() to fix a 64-bit guest crash when registering the NMI callback on Xen 3.1 and earlier. It's not needed since the NMI callback is set by a set_trap_table hypercall (in xen_load_idt() or xen_write_idt_entry()). It's also broken since it only set the current VCPU's callback. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ea9f9274bf4337ba7cbab241c780487651642d63 upstream.

Remove xen_enable_nmi() to fix a 64-bit guest crash when registering
the NMI callback on Xen 3.1 and earlier.

It's not needed since the NMI callback is set by a set_trap_table
hypercall (in xen_load_idt() or xen_write_idt_entry()).

It's also broken since it only set the current VCPU's callback.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on 2014-08-07T23:53:53+00:00 Roger Quadros rogerq@ti.com 2014-07-04T09:55:43+00:00 710dfba5f0e5241bd614b58ea3242e782938d7b8 commit e120fb459693bbc1ac3eabdd65c3659d7cfbfd2a upstream. After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak <rnayak@ti.com> CC: Tero Kristo <t-kristo@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e120fb459693bbc1ac3eabdd65c3659d7cfbfd2a upstream.

After clarification from the hardware team it was found that
this 1.8V PHY supply can't be switched OFF when SoC is Active.

Since the PHY IPs don't contain isolation logic built in the design to
allow the power rail to be switched off, there is a very high risk
of IP reliability and additional leakage paths which can result in
additional power consumption.

The only scenario where this rail can be switched off is part of Power on
reset sequencing, but it needs to be kept always-on during operation.

This patch is required for proper functionality of USB, SATA
and PCIe on DRA7-evm.

CC: Rajendra Nayak <rnayak@ti.com>
CC: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86_64/entry/xen: Do not invoke espfix64 on Xen 2014-08-07T23:53:53+00:00 Andy Lutomirski luto@amacapital.net 2014-07-23T15:34:11+00:00 84dd7a67ceb818babfcc6fe16233ede05e9b2590 commit 7209a75d2009dbf7745e2fd354abf25c3deb3ca3 upstream. This moves the espfix64 logic into native_iret. To make this work, it gets rid of the native patch for INTERRUPT_RETURN: INTERRUPT_RETURN on native kernels is now 'jmp native_iret'. This changes the 16-bit SS behavior on Xen from OOPSing to leaking some bits of the Xen hypervisor's RSP (I think). [ hpa: this is a nonzero cost on native, but probably not enough to measure. Xen needs to fix this in their own code, probably doing something equivalent to espfix64. ] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7209a75d2009dbf7745e2fd354abf25c3deb3ca3 upstream.

This moves the espfix64 logic into native_iret.  To make this work,
it gets rid of the native patch for INTERRUPT_RETURN:
INTERRUPT_RETURN on native kernels is now 'jmp native_iret'.

This changes the 16-bit SS behavior on Xen from OOPSing to leaking
some bits of the Xen hypervisor's RSP (I think).

[ hpa: this is a nonzero cost on native, but probably not enough to
  measure. Xen needs to fix this in their own code, probably doing
  something equivalent to espfix64. ]

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>