linux-stable.git/arch/xtensa, branch v4.9.142

xtensa: fix boot parameters address translation

2018-11-21T08:25:59+00:00

commit 40dc948f234b73497c3278875eb08a01d5854d3f upstream.

The bootloader may pass physical address of the boot parameters structure
to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in
the arch/xtensa/kernel/head.S is supposed to map that physical address to
the virtual address in the configured virtual memory layout.

This code haven't been updated when additional 256+256 and 512+512
memory layouts were introduced and it may produce wrong addresses when
used with these layouts.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: make sure bFLT stack is 16 byte aligned

2018-11-21T08:25:59+00:00

commit 0773495b1f5f1c5e23551843f87b5ff37e7af8f7 upstream.

Xtensa ABI requires stack alignment to be at least 16. In noMMU
configuration ARCH_SLAB_MINALIGN is used to align stack. Make it at
least 16.

This fixes the following runtime error in noMMU configuration, caused by
interaction between insufficiently aligned stack and alloca function,
that results in corruption of on-stack variable in the libc function
glob:

 Caught unhandled exception in 'sh' (pid = 47, pc = 0x02d05d65)
  - should not happen
  EXCCAUSE is 15

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: add NOTES section to the linker script

2018-11-21T08:25:59+00:00

commit 4119ba211bc4f1bf638f41e50b7a0f329f58aa16 upstream.

This section collects all source .note.* sections together in the
vmlinux image. Without it .note.Linux section may be placed at address
0, while the rest of the kernel is at its normal address, resulting in a
huge vmlinux.bin image that may not be linked into the xtensa Image.elf.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: increase ranges in ___invalidate_{i,d}cache_all

2018-09-09T18:01:23+00:00

commit fec3259c9f747c039f90e99570540114c8d81a14 upstream.

Cache invalidation macros use cache line size to iterate over
invalidated cache lines, assuming that all cache ways are invalidated by
single instruction, but xtensa ISA recommends to not assume that for
future compatibility:
  In some implementations all ways at index Addry-1..z are invalidated
  regardless of the specified way, but for future compatibility this
  behavior should not be assumed.

Iterate over all cache ways in ___invalidate_icache_all and
___invalidate_dcache_all.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: limit offsets in __loop_cache_{all,page}

2018-09-09T18:01:23+00:00

commit be75de25251f7cf3e399ca1f584716a95510d24a upstream.

When building kernel for xtensa cores with big cache lines (e.g. 128
bytes or more) __loop_cache_all and __loop_cache_page may generate
assembly instructions with immediate fields that are too big. This
results in the following build errors:

  arch/xtensa/mm/misc.S: Assembler messages:
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '256'
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '384'
  arch/xtensa/kernel/head.S: Assembler messages:
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '256'
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '384'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '256'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '384'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '256'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '384'

Add parameter max_immed to these macros and use it to limit values of
immediate operands. Extract common code of these macros into the new
macro __loop_cache_unroll.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

signal/xtensa: Consistenly use SIGBUS in do_unaligned_user

2018-07-03T09:23:06+00:00

commit 7de712ccc096b81d23cc0a941cd9b8cb3956605d upstream.

While working on changing this code to use force_sig_fault I
discovered that do_unaliged_user is sets si_signo to SIGBUS and passes
SIGSEGV to force_sig_info.  Which is just b0rked.

The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS.

Cc: Chris Zankel 
Cc: Max Filippov 
Cc: linux-xtensa@linux-xtensa.org
Cc: stable@vger.kernel.org
Acked-by: Max Filippov 
Fixes: 5a0015d62668 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3")
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

futex: Remove duplicated code and fix undefined behaviour

2018-05-19T08:27:00+00:00

commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream.

There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.

Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).

Signed-off-by: Jiri Slaby 
Signed-off-by: Thomas Gleixner 
Acked-by: Russell King 
Acked-by: Michael Ellerman  (powerpc)
Acked-by: Heiko Carstens  [s390]
Acked-by: Chris Metcalf  [for tile]
Reviewed-by: Darren Hart (VMware) 
Reviewed-by: Will Deacon  [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker 
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt 
Cc: Max Filippov 
Cc: Paul Mackerras 
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn 
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato 
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: Catalin Marinas 
Cc: Matt Turner 
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu 
Cc: Arnd Bergmann 
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson 
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky 
Cc: Stafford Horne 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson 
Cc: Chris Zankel 
Cc: Michal Simek 
Cc: Tony Luck 
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta 
Cc: Ralf Baechle 
Cc: Richard Kuo 
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky 
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" 
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix high memory/reserved memory collision

2018-02-28T09:18:30+00:00

commit 6ac5a11dc674bc5016ea716e8082fff61f524dc1 upstream.

Xtensa memory initialization code frees high memory pages without
checking whether they are in the reserved memory regions or not. That
results in invalid value of totalram_pages and duplicate page usage by
CMA and highmem. It produces a bunch of BUGs at startup looking like
this:

BUG: Bad page state in process swapper  pfn:70800
page:be60c000 count:0 mapcount:-127 mapping:  (null) index:0x1
flags: 0x80000000()
raw: 80000000 00000000 00000001 ffffff80 00000000 be60c014 be60c014 0000000a
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Tainted: G    B            4.16.0-rc1-00015-g7928b2cbe55b-dirty #23
Stack:
 bd839d33 00000000 00000018 ba97b64c a106578c bd839d70 be60c000 00000000
 a1378054 bd86a000 00000003 ba97b64c a1066166 bd839da0 be60c000 ffe00000
 a1066b58 bd839dc0 be504000 00000000 000002f4 bd838000 00000000 0000001e
Call Trace:
 [] bad_page+0xac/0xd0
 [] free_pages_check_bad+0x34/0x4c
 [] __free_pages_ok+0xae/0x14c
 [] __free_pages+0x30/0x64
 [] init_cma_reserved_pageblock+0x35/0x44
 [] cma_init_reserved_areas+0xf4/0x148
 [] do_one_initcall+0x80/0xf8
 [] kernel_init_freeable+0xda/0x13c
 [] kernel_init+0x9/0xd0
 [] ret_from_kernel_thread+0xc/0x18

Only free high memory pages that are not reserved.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix futex_atomic_cmpxchg_inatomic

2018-02-17T12:21:19+00:00

commit ca47480921587ae30417dd234a9f79af188e3666 upstream.

Return 0 if the operation was successful, not the userspace memory
value. Check that userspace value equals passed oldval, not itself.
Don't update *uval if the value wasn't read from userspace memory.

This fixes process hang due to infinite loop in futex_lock_pi.
It also fixes a bunch of glibc tests nptl/tst-mutexpi*.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: don't limit csum_partial export by CONFIG_NET

2017-08-16T20:43:16+00:00

commit 7f81e55c737a8fa82c71f290945d729a4902f8d2 upstream.

csum_partial and csum_partial_copy_generic are defined unconditionally
and are available even when CONFIG_NET is disabled. They are used not
only by the network drivers, but also by scsi and media.
Don't limit these functions export by CONFIG_NET.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman