<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/arch/xtensa/kernel, branch v3.6.3</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>xtensa: Add missing RCU idle APIs on idle loop</title>
<updated>2012-10-12T20:50:30+00:00</updated>
<author>
<name>Frederic Weisbecker</name>
<email>fweisbec@gmail.com</email>
</author>
<published>2012-08-22T15:27:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d693bb06f86eb5f94ee9f42d91ce630f88a72445'/>
<id>d693bb06f86eb5f94ee9f42d91ce630f88a72445</id>
<content type='text'>
commit 11ad47a0edbd62bfc0547cfcdf227a911433f207 upstream.

In the old times, the whole idle task was considered
as an RCU quiescent state. But as RCU became more and
more successful overtime, some RCU read side critical
section have been added even in the code of some
architectures idle tasks, for tracing for example.

So nowadays, rcu_idle_enter() and rcu_idle_exit() must
be called by the architecture to tell RCU about the part
in the idle loop that doesn't make use of rcu read side
critical sections, typically the part that puts the CPU
in low power mode.

This is necessary for RCU to find the quiescent states in
idle in order to complete grace periods.

Add this missing pair of calls in the xtensa's idle loop.

Reported-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Signed-off-by: Frederic Weisbecker &lt;fweisbec@gmail.com&gt;
Cc: Chris Zankel &lt;chris@zankel.net&gt;
Signed-off-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Reviewed-by: Josh Triplett &lt;josh@joshtriplett.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 11ad47a0edbd62bfc0547cfcdf227a911433f207 upstream.

In the old times, the whole idle task was considered
as an RCU quiescent state. But as RCU became more and
more successful overtime, some RCU read side critical
section have been added even in the code of some
architectures idle tasks, for tracing for example.

So nowadays, rcu_idle_enter() and rcu_idle_exit() must
be called by the architecture to tell RCU about the part
in the idle loop that doesn't make use of rcu read side
critical sections, typically the part that puts the CPU
in low power mode.

This is necessary for RCU to find the quiescent states in
idle in order to complete grace periods.

Add this missing pair of calls in the xtensa's idle loop.

Reported-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Signed-off-by: Frederic Weisbecker &lt;fweisbec@gmail.com&gt;
Cc: Chris Zankel &lt;chris@zankel.net&gt;
Signed-off-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Reviewed-by: Josh Triplett &lt;josh@joshtriplett.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ipc: add COMPAT_SHMLBA support</title>
<updated>2012-07-31T00:25:20+00:00</updated>
<author>
<name>Will Deacon</name>
<email>will.deacon@arm.com</email>
</author>
<published>2012-07-30T21:42:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=079a96ae3871f0ed9083aac2218136ccec5b9877'/>
<id>079a96ae3871f0ed9083aac2218136ccec5b9877</id>
<content type='text'>
If the SHMLBA definition for a native task differs from the definition for
a compat task, the do_shmat() function would need to handle both.

This patch introduces COMPAT_SHMLBA, which is used by the compat shmat
syscall when calling the ipc code and allows architectures such as AArch64
(where the native SHMLBA is 64k but the compat (AArch32) definition is
16k) to provide the correct semantics for compat IPC system calls.

Cc: David S. Miller &lt;davem@davemloft.net&gt;
Cc: Chris Zankel &lt;chris@zankel.net&gt;
Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Acked-by: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Signed-off-by: Will Deacon &lt;will.deacon@arm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If the SHMLBA definition for a native task differs from the definition for
a compat task, the do_shmat() function would need to handle both.

This patch introduces COMPAT_SHMLBA, which is used by the compat shmat
syscall when calling the ipc code and allows architectures such as AArch64
(where the native SHMLBA is 64k but the compat (AArch32) definition is
16k) to provide the correct semantics for compat IPC system calls.

Cc: David S. Miller &lt;davem@davemloft.net&gt;
Cc: Chris Zankel &lt;chris@zankel.net&gt;
Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Acked-by: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Signed-off-by: Will Deacon &lt;will.deacon@arm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci</title>
<updated>2012-07-24T23:17:07+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-07-24T23:17:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6dd53aa4563a2c69e80a24d2cc68d484b5ea2891'/>
<id>6dd53aa4563a2c69e80a24d2cc68d484b5ea2891</id>
<content type='text'>
Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug:
    - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
  Device hotplug:
    - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
    - Call FINAL fixups for hot-added devices, too (Myron Stowe)
    - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
    - Remove all functions in a slot, not just those with _EJx (Amos
      Kong)
  Dynamic resource management:
    - Track bus number allocation (struct resource tree per domain)
      (Yinghai Lu)
    - Make P2P bridge 1K I/O windows work with resource reassignment
      (Bjorn Helgaas, Yinghai Lu)
    - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
  Power management:
    - Add PCIe runtime D3cold support (Huang Ying)
  Virtualization:
    - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex
      Williamson)
    - Add quirks for devices with broken INTx masking (Jan Kiszka)
  Miscellaneous:
    - Fix some PCI Express capability version issues (Myron Stowe)
    - Factor out some arch code with a weak, generic, pcibios_setup()
      (Myron Stowe)"

* tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits)
  PCI: hotplug: ensure a consistent return value in error case
  PCI: fix undefined reference to 'pci_fixup_final_inited'
  PCI: build resource code for M68K architecture
  PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
  PCI: reorder __pci_assign_resource() (no change)
  PCI: fix truncation of resource size to 32 bits
  PCI: acpiphp: merge acpiphp_debug and debug
  PCI: acpiphp: remove unused res_lock
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: call final fixups hot-added devices
  PCI: move final fixups from __init to __devinit
  x86/PCI: move final fixups from __init to __devinit
  MIPS/PCI: move final fixups from __init to __devinit
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
  PCI: never discard enable/suspend/resume_early/resume fixups
  PCI: release temporary reference in __nv_msi_ht_cap_quirk()
  PCI: restructure 'pci_do_fixups()'
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug:
    - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
  Device hotplug:
    - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
    - Call FINAL fixups for hot-added devices, too (Myron Stowe)
    - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
    - Remove all functions in a slot, not just those with _EJx (Amos
      Kong)
  Dynamic resource management:
    - Track bus number allocation (struct resource tree per domain)
      (Yinghai Lu)
    - Make P2P bridge 1K I/O windows work with resource reassignment
      (Bjorn Helgaas, Yinghai Lu)
    - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
  Power management:
    - Add PCIe runtime D3cold support (Huang Ying)
  Virtualization:
    - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex
      Williamson)
    - Add quirks for devices with broken INTx masking (Jan Kiszka)
  Miscellaneous:
    - Fix some PCI Express capability version issues (Myron Stowe)
    - Factor out some arch code with a weak, generic, pcibios_setup()
      (Myron Stowe)"

* tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits)
  PCI: hotplug: ensure a consistent return value in error case
  PCI: fix undefined reference to 'pci_fixup_final_inited'
  PCI: build resource code for M68K architecture
  PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
  PCI: reorder __pci_assign_resource() (no change)
  PCI: fix truncation of resource size to 32 bits
  PCI: acpiphp: merge acpiphp_debug and debug
  PCI: acpiphp: remove unused res_lock
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: call final fixups hot-added devices
  PCI: move final fixups from __init to __devinit
  x86/PCI: move final fixups from __init to __devinit
  MIPS/PCI: move final fixups from __init to __devinit
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
  PCI: never discard enable/suspend/resume_early/resume fixups
  PCI: release temporary reference in __nv_msi_ht_cap_quirk()
  PCI: restructure 'pci_do_fixups()'
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>xtensa: fix incorrect memset</title>
<updated>2012-07-11T23:04:49+00:00</updated>
<author>
<name>Alan Cox</name>
<email>alan@linux.intel.com</email>
</author>
<published>2012-07-11T21:02:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=688bb4158f64f3af0fe1d13e7642f8c4c402453e'/>
<id>688bb4158f64f3af0fe1d13e7642f8c4c402453e</id>
<content type='text'>
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871

Reported-by: &lt;dcb314@hotmail.com&gt;
Signed-off-by: Alan Cox &lt;alan@linux.intel.com&gt;
Signed-off-by: Chris Zankel &lt;chris@zankel.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871

Reported-by: &lt;dcb314@hotmail.com&gt;
Signed-off-by: Alan Cox &lt;alan@linux.intel.com&gt;
Signed-off-by: Chris Zankel &lt;chris@zankel.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'pci/myron-pcibios_setup' into next</title>
<updated>2012-07-05T21:31:05+00:00</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2012-07-05T21:31:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=85a00dd391d2de1e177c5ad8db5672428934ac20'/>
<id>85a00dd391d2de1e177c5ad8db5672428934ac20</id>
<content type='text'>
* pci/myron-pcibios_setup:
  xtensa/PCI: factor out pcibios_setup()
  x86/PCI: adjust section annotations for pcibios_setup()
  unicore32/PCI: adjust section annotations for pcibios_setup()
  tile/PCI: factor out pcibios_setup()
  sparc/PCI: factor out pcibios_setup()
  sh/PCI: adjust section annotations for pcibios_setup()
  sh/PCI: factor out pcibios_setup()
  powerpc/PCI: factor out pcibios_setup()
  parisc/PCI: factor out pcibios_setup()
  MIPS/PCI: adjust section annotations for pcibios_setup()
  MIPS/PCI: factor out pcibios_setup()
  microblaze/PCI: factor out pcibios_setup()
  ia64/PCI: factor out pcibios_setup()
  cris/PCI: factor out pcibios_setup()
  alpha/PCI: factor out pcibios_setup()
  PCI: pull pcibios_setup() up into core
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* pci/myron-pcibios_setup:
  xtensa/PCI: factor out pcibios_setup()
  x86/PCI: adjust section annotations for pcibios_setup()
  unicore32/PCI: adjust section annotations for pcibios_setup()
  tile/PCI: factor out pcibios_setup()
  sparc/PCI: factor out pcibios_setup()
  sh/PCI: adjust section annotations for pcibios_setup()
  sh/PCI: factor out pcibios_setup()
  powerpc/PCI: factor out pcibios_setup()
  parisc/PCI: factor out pcibios_setup()
  MIPS/PCI: adjust section annotations for pcibios_setup()
  MIPS/PCI: factor out pcibios_setup()
  microblaze/PCI: factor out pcibios_setup()
  ia64/PCI: factor out pcibios_setup()
  cris/PCI: factor out pcibios_setup()
  alpha/PCI: factor out pcibios_setup()
  PCI: pull pcibios_setup() up into core
</pre>
</div>
</content>
</entry>
<entry>
<title>xtensa/PCI: factor out pcibios_setup()</title>
<updated>2012-07-05T21:09:14+00:00</updated>
<author>
<name>Myron Stowe</name>
<email>myron.stowe@redhat.com</email>
</author>
<published>2012-06-26T03:32:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=29e8d7bff2f52dd5464a9fb24ece608bbf8fd5ae'/>
<id>29e8d7bff2f52dd5464a9fb24ece608bbf8fd5ae</id>
<content type='text'>
The PCI core provides a generic pcibios_setup() routine.  Drop this
architecture-specific version in favor of that.

Signed-off-by: Myron Stowe &lt;myron.stowe@redhat.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The PCI core provides a generic pcibios_setup() routine.  Drop this
architecture-specific version in favor of that.

Signed-off-by: Myron Stowe &lt;myron.stowe@redhat.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;</pre>
</div>
</content>
</entry>
<entry>
<title>xtensa: replace xtensa-specific _f{data,text} by _s{data,text}</title>
<updated>2012-06-20T21:39:35+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2012-06-20T19:52:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5e7b6ed8e9bf3c8e3bb579fd0aec64f6526f8c81'/>
<id>5e7b6ed8e9bf3c8e3bb579fd0aec64f6526f8c81</id>
<content type='text'>
commit a2d063ac216c161 ("extable, core_kernel_data(): Make sure all archs
define _sdata") missed xtensa.  Xtensa does have a start of data marker,
but calls it _fdata, causing

    kernel/built-in.o:(.text+0x964): undefined reference to `_sdata'

_stext was already defined, but it was duplicated by _fdata.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Cc: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Cc: Chris Zankel &lt;chris@zankel.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a2d063ac216c161 ("extable, core_kernel_data(): Make sure all archs
define _sdata") missed xtensa.  Xtensa does have a start of data marker,
but calls it _fdata, causing

    kernel/built-in.o:(.text+0x964): undefined reference to `_sdata'

_stext was already defined, but it was duplicated by _fdata.

Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Cc: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Cc: Chris Zankel &lt;chris@zankel.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: replace struct pci_bus secondary/subordinate with busn_res</title>
<updated>2012-06-13T21:42:22+00:00</updated>
<author>
<name>Yinghai Lu</name>
<email>yinghai@kernel.org</email>
</author>
<published>2012-05-18T01:51:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b918c62e086b2130a7bae44110ca516ef10bfe5a'/>
<id>b918c62e086b2130a7bae44110ca516ef10bfe5a</id>
<content type='text'>
Replace the struct pci_bus secondary/subordinate members with the
struct resource busn_res.  Later we'll build a resource tree of these
bus numbers.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu &lt;yinghai@kernel.org&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Replace the struct pci_bus secondary/subordinate members with the
struct resource busn_res.  Later we'll build a resource tree of these
bus numbers.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu &lt;yinghai@kernel.org&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;</pre>
</div>
</content>
</entry>
<entry>
<title>fixups for signal breakage</title>
<updated>2012-06-04T21:47:34+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2012-06-04T21:47:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=03240b279dbbda41f2fc55ff4424acf651e25bef'/>
<id>03240b279dbbda41f2fc55ff4424acf651e25bef</id>
<content type='text'>
Obvious brainos spotted by Geert.

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Obvious brainos spotted by Geert.

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>new helper: signal_delivered()</title>
<updated>2012-06-01T16:58:52+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2012-04-28T06:04:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=efee984c27b67e3ebef40410f35671997441b57c'/>
<id>efee984c27b67e3ebef40410f35671997441b57c</id>
<content type='text'>
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
</feed>
