linux-stable.git/arch/xtensa/kernel, branch v3.14.78

xtensa: clear all DBREAKC registers on start

2016-04-12T16:12:46+00:00

commit 7de7ac785ae18a2cdc78d7560f48e3213d9ea0ab upstream.

There are XCHAL_NUM_DBREAK registers, clear them all.
This also fixes cryptic assembler error message with binutils 2.25 when
XCHAL_NUM_DBREAK is 0:

  as: out of memory allocating 18446744073709551575 bytes after a total
  of 495616 bytes

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix kernel register spilling

2015-09-21T17:02:19+00:00

commit 77d6273e79e3a86552fcf10cdd31a69b46ed2ce6 upstream.

call12 can't be safely used as the first call in the inline function,
because the compiler does not extend the stack frame of the bounding
function accordingly, which may result in corruption of local variables.

If a call needs to be done, do call8 first followed by call12.

For pure assembly code in _switch_to increase stack frame size of the
bounding function.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix threadptr reload on return to userspace

2015-09-21T17:02:19+00:00

commit 4229fb12a03e5da5882b420b0aa4a02e77447b86 upstream.

Userspace return code may skip restoring THREADPTR register if there are
no registers that need to be zeroed. This leads to spurious failures in
libc NPTL tests.

Always restore THREADPTR on return to userspace.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix a6 and a7 handling in fast_syscall_xtensa

2014-10-05T21:52:13+00:00

commit d1b6ba82a50cecf94be540a3a153aa89d97511a0 upstream.

Remove restoring a6 on some return paths and instead modify and restore
it in a single place, using symbolic name.
Correctly restore a7 from PT_AREG7 in case of illegal a6 value.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss

2014-10-05T21:52:13+00:00

commit 7128039fe2dd3d59da9e4ffa036f3aaa3ba87b9f upstream.

Current definition of TLBTEMP_BASE_2 is always 32K above the
TLBTEMP_BASE_1, whereas fast_second_level_miss handler for the TLBTEMP
region analyzes virtual address bit (PAGE_SHIFT + DCACHE_ALIAS_ORDER)
to determine TLBTEMP region where the fault happened. The size of the
TLBTEMP region is also checked incorrectly: not 64K, but twice data
cache way size (whicht may as well be less than the instruction cache
way size).

Fix TLBTEMP_BASE_2 to be TLBTEMP_BASE_1 + data cache way size.
Provide TLBTEMP_SIZE that is a greater of doubled data cache way size or
the instruction cache way size, and use it to determine if the second
level TLB miss occured in the TLBTEMP region.

Practical occurence of page faults in the TLBTEMP area is extremely
rare, this code can be tested by deletion of all w[di]tlb instructions
in the tlbtemp_mapping region.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS

2014-10-05T21:52:13+00:00

commit 52247123749cc3cbc30168b33ad8c69515c96d23 upstream.

With SMP and a lot of debug options enabled task_struct::thread gets out
of reach of s32i/l32i instructions with base pointing at task_struct,
breaking build with the following messages:

  arch/xtensa/kernel/entry.S: Assembler messages:
  arch/xtensa/kernel/entry.S:1002: Error: operand 3 of 'l32i.n' has invalid value '1048'
  arch/xtensa/kernel/entry.S:1831: Error: operand 3 of 's32i.n' has invalid value '1040'
  arch/xtensa/kernel/entry.S:1832: Error: operand 3 of 's32i.n' has invalid value '1044'

Change base to point to task_struct::thread in such cases.
Don't use a10 in _switch_to to save/restore prev pointer as a2 is not
clobbered.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix address checks in dma_{alloc,free}_coherent

2014-10-05T21:52:13+00:00

commit 1ca49463c44c970b1ab1d71b0f268bfdf8427a7e upstream.

Virtual address is translated to the XCHAL_KSEG_CACHED region in the
dma_free_coherent, but is checked to be in the 0...XCHAL_KSEG_SIZE
range.

Change check for end of the range from 'addr >= X' to 'addr > X - 1' to
handle the case of X == 0.

Replace 'if (C) BUG();' construct with 'BUG_ON(C);'.

Signed-off-by: Alan Douglas 
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: add fixup for double exception raised in window overflow

2014-08-07T21:52:39+00:00

commit 17290231df16eeee5dfc198dbf5ee4b419996dcd upstream.

There are two FIXMEs in the double exception handler 'for the extremely
unlikely case'. This case gets hit by gcc during kernel build once in
a few hours, resulting in an unrecoverable exception condition.

Provide missing fixup routine to handle this case. Double exception
literals now need 8 more bytes, add them to the linker script.

Also replace bbsi instructions with bbsi.l as we're branching depending
on 8th and 7th LSB-based bits of exception address.

This may be tested by adding the explicit DTLB invalidation to window
overflow handlers, like the following:

#    --- a/arch/xtensa/kernel/vectors.S
#    +++ b/arch/xtensa/kernel/vectors.S
#    @@ -592,6 +592,14 @@ ENDPROC(_WindowUnderflow4)
#     ENTRY_ALIGN64(_WindowOverflow8)
#
#    	s32e	a0, a9, -16
#    +	bbsi.l	a9, 31, 1f
#    +	rsr	a0, ccount
#    +	bbsi.l	a0, 4, 1f
#    +	pdtlb	a0, a9
#    +	idtlb	a0
#    +	movi	a0, 9
#    +	idtlb	a0
#    +1:
#    	l32e    a0, a1, -12
#    	s32e    a2, a9,  -8
#    	s32e    a1, a9, -12

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'xtensa-for-next-20140221-1' into for_next

2014-02-24T08:34:36+00:00

Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;
- don't select USE_GENERIC_SMP_HELPERS;
- enable common clock framework support, set up ethoc clock on xtfpga;
- wire up sched_setattr and sched_getattr syscalls.

Signed-off-by: Chris Zankel

xtensa: support common clock framework

2014-02-21T17:33:42+00:00

Signed-off-by: Max Filippov