[ Upstream commit d67ed2510d28a1eb33171010d35cf52178cfcbdd ]

CONFIG_OF can be set by a randconfig or by a user -- without setting the
early flattree option (OF_EARLY_FLATTREE).  This causes build errors.
However, if randconfig or a user sets USE_OF in the Xtensa config,
the right kconfig symbols are set to fix the build.

Fixes these build errors:

../arch/xtensa/kernel/setup.c:67:19: error: ‘__dtb_start’ undeclared here (not in a function); did you mean ‘dtb_start’?
   67 | void *dtb_start = __dtb_start;
      |                   ^~~~~~~~~~~
../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
  201 |         if (!of_flat_dt_is_compatible(node, "simple-bus"))
../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
  204 |         ranges = of_get_flat_dt_prop(node, "ranges", &len);
../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
  204 |         ranges = of_get_flat_dt_prop(node, "ranges", &len);
      |                ^
../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
  228 |         early_init_dt_scan(params);
../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
  229 |         of_scan_flat_dt(xtensa_dt_io_area, NULL);

xtensa-elf-ld: arch/xtensa/mm/mmu.o:(.text+0x0): undefined reference to `xtensa_kio_paddr'

Fixes: da844a81779e ("xtensa: add device trees support")
Fixes: 6cb971114f63 ("xtensa: remap io area defined in device tree")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0d5ab144429e8bd80889b856a44d56ab4a5cd59b ]

Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

The xtensa free_initrd_mem() verifies that initrd is mapped and then
frees its memory using free_reserved_area().

The initrd is considered mapped when its memory was successfully reserved
with mem_reserve().

Resetting initrd_start to 0 in case of mem_reserve() failure allows to
switch to generic free_initrd_mem() implementation.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Message-Id: <1563977432-8376-1-git-send-email-rppt@linux.ibm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

ITLB entry modifications must be followed by the isync instruction
before the new entries are possibly used. cpu_reset lacks one isync
between ITLB way 6 initialization and jump to the identity mapping.
Add missing isync to xtensa cpu_reset.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

xtensa-specific PCI initialization code has significantly bitrotted over
time because there's no platform that use it. Get rid of remaining
non-functioning initialization and remove platform_pcibios_* interface.
A new platform that would use PCI on xtensa will configure PCI
controller using device tree.

Drop variables pci_ctrl_head, pci_bus_count and functions pcibios_init,
pci_controller_apertures, platform_pcibios_init and
platform_pcibios_fixup.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Since commit 9012d011660ea5cf2 ("compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING"), xtensa:tinyconfig fails to build with section
mismatch errors.

WARNING: vmlinux.o(.text.unlikely+0x68): Section mismatch in reference
	from the function ___pa()
	to the function .meminit.text:memblock_reserve()
WARNING: vmlinux.o(.text.unlikely+0x74): Section mismatch in reference
	from the function mem_reserve()
	to the function .meminit.text:memblock_reserve()
FATAL: modpost: Section mismatches detected.

This was not seen prior to the above mentioned commit because mem_reserve()
was always inlined.

Mark mem_reserve(() as __init_memblock to have it reside in the same
section as memblock_reserve().

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <1559220098-9955-1-git-send-email-linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Implement atomic primitives using exclusive access opcodes available in
the recent xtensa cores.
Since l32ex/s32ex don't have any memory ordering guarantees don't define
__smp_mb__before_atomic/__smp_mb__after_atomic to make them use memw.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

WSR and RSR are too generic and collide with other macro definitions in
the kernel causing warnings in allmodconfig builds. Drop WSR and RSR
macros and WSR_* and RSR_* variants. Change get_sr and set_sr to
xtensa_get_sr and xtensa_set_sr. Fix up users.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

A kernel may not need any boot parameters from the bootloader, allow
disabling bootparam parsing in that case.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

platform/hardware.h no longer supply any information for processor.h,
vectors.h, setup.c or vmlinux.lds.S, don't include it.
This header is now empty in the platforms/iss, so remove it altogether.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>