linux-stable.git/arch/xtensa/include/asm, branch v4.14.331

init: Remove check_bugs() leftovers

2023-08-08T17:48:24+00:00

commit 61235b24b9cb37c13fcad5b9596d59a1afdcec30 upstream

Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Richard Henderson 
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
Signed-off-by: Daniel Sneddon 
Signed-off-by: Greg Kroah-Hartman

xtensa: use fallback for random_get_entropy() instead of zero

2022-06-25T09:46:39+00:00

commit e10e2f58030c5c211d49042a8c2a1b93d40b2ffb upstream.

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

This is accomplished by just including the asm-generic code like on
other architectures, which means we can get rid of the empty stub
function here.

Cc: Thomas Gleixner 
Cc: Arnd Bergmann 
Acked-by: Max Filippov 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

xtensa: make sure bFLT stack is 16 byte aligned

2018-11-21T08:24:06+00:00

commit 0773495b1f5f1c5e23551843f87b5ff37e7af8f7 upstream.

Xtensa ABI requires stack alignment to be at least 16. In noMMU
configuration ARCH_SLAB_MINALIGN is used to align stack. Make it at
least 16.

This fixes the following runtime error in noMMU configuration, caused by
interaction between insufficiently aligned stack and alloca function,
that results in corruption of on-stack variable in the libc function
glob:

 Caught unhandled exception in 'sh' (pid = 47, pc = 0x02d05d65)
  - should not happen
  EXCCAUSE is 15

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: increase ranges in ___invalidate_{i,d}cache_all

2018-09-09T17:55:59+00:00

commit fec3259c9f747c039f90e99570540114c8d81a14 upstream.

Cache invalidation macros use cache line size to iterate over
invalidated cache lines, assuming that all cache ways are invalidated by
single instruction, but xtensa ISA recommends to not assume that for
future compatibility:
  In some implementations all ways at index Addry-1..z are invalidated
  regardless of the specified way, but for future compatibility this
  behavior should not be assumed.

Iterate over all cache ways in ___invalidate_icache_all and
___invalidate_dcache_all.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: limit offsets in __loop_cache_{all,page}

2018-09-09T17:55:58+00:00

commit be75de25251f7cf3e399ca1f584716a95510d24a upstream.

When building kernel for xtensa cores with big cache lines (e.g. 128
bytes or more) __loop_cache_all and __loop_cache_page may generate
assembly instructions with immediate fields that are too big. This
results in the following build errors:

  arch/xtensa/mm/misc.S: Assembler messages:
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '256'
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '384'
  arch/xtensa/kernel/head.S: Assembler messages:
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '256'
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '384'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '256'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '384'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '256'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '384'

Add parameter max_immed to these macros and use it to limit values of
immediate operands. Extract common code of these macros into the new
macro __loop_cache_unroll.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

xtensa: fix futex_atomic_cmpxchg_inatomic

2018-02-16T19:23:07+00:00

commit ca47480921587ae30417dd234a9f79af188e3666 upstream.

Return 0 if the operation was successful, not the userspace memory
value. Check that userspace value equals passed oldval, not itself.
Don't update *uval if the value wasn't read from userspace memory.

This fixes process hang due to infinite loop in futex_lock_pi.
It also fixes a bunch of glibc tests nptl/tst-mutexpi*.

Signed-off-by: Max Filippov 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

arch: remove unused *_segments() macros/functions

2017-09-22T22:59:52+00:00

Some architectures define the no-op macros/functions copy_segments,
release_segments and forget_segments. These are used nowhere in the
tree, so removed them.

Signed-off-by: Tobias Klauser 
Acked-by: Vineet Gupta    [for arch/arc]
Signed-off-by: Linus Torvalds

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-09-04T18:52:29+00:00

Pull locking updates from Ingo Molnar:

 - Add 'cross-release' support to lockdep, which allows APIs like
   completions, where it's not the 'owner' who releases the lock, to be
   tracked. It's all activated automatically under
   CONFIG_PROVE_LOCKING=y.

 - Clean up (restructure) the x86 atomics op implementation to be more
   readable, in preparation of KASAN annotations. (Dmitry Vyukov)

 - Fix static keys (Paolo Bonzini)

 - Add killable versions of down_read() et al (Kirill Tkhai)

 - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)

 - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)

 - Remove smp_mb__before_spinlock() and convert its usages, introduce
   smp_mb__after_spinlock() (Peter Zijlstra)

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  locking/lockdep/selftests: Fix mixed read-write ABBA tests
  sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
  acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
  locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
  smp: Avoid using two cache lines for struct call_single_data
  locking/lockdep: Untangle xhlock history save/restore from task independence
  locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
  futex: Remove duplicated code and fix undefined behaviour
  Documentation/locking/atomic: Finish the document...
  locking/lockdep: Fix workqueue crossrelease annotation
  workqueue/lockdep: 'Fix' flush_work() annotation
  locking/lockdep/selftests: Add mixed read-write ABBA tests
  mm, locking/barriers: Clarify tlb_flush_pending() barriers
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
  locking/lockdep: Explicitly initialize wq_barrier::done::map
  locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
  locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
  locking/refcounts, x86/asm: Implement fast refcount overflow protection
  locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
  ...

futex: Remove duplicated code and fix undefined behaviour

2017-08-25T20:49:59+00:00

There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.

Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).

Signed-off-by: Jiri Slaby 
Signed-off-by: Thomas Gleixner 
Acked-by: Russell King 
Acked-by: Michael Ellerman  (powerpc)
Acked-by: Heiko Carstens  [s390]
Acked-by: Chris Metcalf  [for tile]
Reviewed-by: Darren Hart (VMware) 
Reviewed-by: Will Deacon  [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker 
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt 
Cc: Max Filippov 
Cc: Paul Mackerras 
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn 
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato 
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: Catalin Marinas 
Cc: Matt Turner 
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu 
Cc: Arnd Bergmann 
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson 
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky 
Cc: Stafford Horne 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson 
Cc: Chris Zankel 
Cc: Michal Simek 
Cc: Tony Luck 
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta 
Cc: Ralf Baechle 
Cc: Richard Kuo 
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky 
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" 
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz